Alan Carter 
- (2024): The mechanical performance of reinforced bituminous interfaces with paving fabric under freeze-thaw conditioning. In: Construction and Building Materials, v. 435 (July 2024).
- (2024): Mechanical Properties of Unbound Limestone Aggregates Replaced by Recycled Glass Aggregate for Pavement in Canada/Quebec. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 51, n. 5 (May 2024).
- (2023): Influences of type and concentration of recycled mineral construction, renovation and demolition waste on the linear viscoelastic behavior of bituminous mastics. In: Construction and Building Materials, v. 371 (March 2023).
- (2023): Linear viscoelastic behavior of asphalt binders and mixtures containing very high percentages of reclaimed asphalt pavement. In: Frontiers of Structural and Civil Engineering, v. 17, n. 8 (August 2023).
- (2019): Characterization of Asphalt Mixtures Produced with Coarse and Fine Recycled Asphalt Particles. In: Infrastructures, v. 4, n. 4 (December 2019).
- (2019): Characterization of Recovered Bitumen from Coarse and Fine Reclaimed Asphalt Pavement Particles. In: Infrastructures, v. 4, n. 2 (June 2019).
- (2022): Integrated performance evaluation of asphalt mixtures with very high reclaimed asphalt pavement (RAP) content. In: Construction and Building Materials, v. 347 (September 2022).
- (2021): Mechanical characterization of grid-reinforced interfaces within rehabilitated bituminous layers. In: Construction and Building Materials, v. 288 (June 2021).
- (2021): Characterization of asphalt mixtures produced with short Pulp Aramid fiber (PAF). In: Construction and Building Materials, v. 280 (April 2021).
- (2022): Machine learning techniques to estimate the degree of binder activity of reclaimed asphalt pavement. In: Materials and Structures, v. 55, n. 4 (19 April 2022).
- (2007): Influence of Various Material and Traffic Inputs on Flexible Pavement Design Methods for Alabama Roadways. In: Journal of Transportation Engineering, v. 133, n. 8 (August 2007).
- (2021): Evaluation of measured and predicted resilient modulus of rubberized Stone Mastic Asphalt (SMA) modified with truck tire rubber powder. In: Case Studies in Construction Materials, v. 15 (December 2021).
- (2021): Effects of pre-cracking on the early-age mechanical properties of a cement-treated base material mixed and tested in laboratory. In: Construction and Building Materials, v. 303 (October 2021).
- (2021): Experimental Measurements of Interfacial Mechanical Properties between Rehabilitated Bituminous Layers Using Innovative Approaches. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 5 (May 2021).
- (2021): Effect of RAP Source on Compactability and Behavior of Cold-Recycled Mixtures in the Small Strain Domain. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 4 (April 2021).
- (2019): Permeability and mechanical property measurements of reinforced asphalt overlay with paving fabrics using novel approaches. In: Materials and Structures, v. 53, n. 1 (16 December 2019).
- (2018): Evaluation of the durability and the performance of an asphalt mix involving Aramid Pulp Fiber (APF): Complex modulus before and after freeze-thaw cycles, fatigue, and TSRST tests. In: Construction and Building Materials, v. 174 (June 2018).
- (2020): Influence of low production temperatures on compactability and mechanical properties of cold recycled mixtures. In: Construction and Building Materials, v. 232 (January 2020).
- (2019): Characterization of Cold In-Place Recycled Materials at Young Age Using Shear Wave Velocity. In: Advances in Civil Engineering Materials, v. 8, n. 1 (July 2019).
- (2019): Effect of Cement Content on Cracking Resistance of Full-Depth Reclamation Materials Using the Semicircular Bending Test. In: Advances in Civil Engineering Materials, v. 8, n. 1 (July 2019).
- (2019): Link between different bottom-up fatigue's law coefficients of mechanical-empirical pavement design software. In: Construction and Building Materials, v. 216 (August 2019).
- (2007): Indirect Tension Relaxation Test to Evaluate the Effect of the Addition of RAP to HMA Mixes. In: Journal of Materials in Civil Engineering (ASCE), v. 19, n. 3 (March 2007).
- (2015): New Conceptual Model for Filler Stiffening Effect on Asphalt Mastic of Microsurfacing. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 11 (November 2015).
- (2015): Choice of an Advanced Rheological Model for Modeling the Viscoelastic Behavior of Hot Mixtures Asphalt (HMA) from Sénégal (West Africa). In: Open Journal of Civil Engineering, v. 5, n. 3 ( 2015).
- (2015): Ability of the classical fatigue criterion to be associated with macro-crack growth. In: Materials and Structures, v. 48, n. 8 (August 2015).
- (2014): Laboratory study of the effect of RAP conditioning on the mechanical properties of hot mix asphalt containing RAP. In: Materials and Structures, v. 47, n. 9 (September 2014).
- (2002): Perméabilité in situ du béton de peau, établie à partir de la percolation d'un gaz en régime d'écoulement permanent. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 29, n. 3 (June 2002).
- (2011): Correspondances entre les coefficients des modèles de fatigue dans les méthodes mécanistiques-empiriques de dimensionnement de chaussées souples. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 38, n. 11 (November 2011).
- (2018): Complex Modulus and Fatigue Analysis of Asphalt Mix after Daily Rapid Freeze-Thaw Cycles. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 4 (April 2018).
- (2015): Evaluation of a modification of current microsurfacing mix design procedures. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 42, n. 5 (May 2015).
Structurae cooperates with
