James E. Braun 
- (2023): Comparisons of load-based and AHRI 210/240 testing and rating for residential heat pumps. In: Science and Technology for the Built Environment, v. 29, n. 5 (April 2023).
- (2022): Laboratory load-based testing and performance rating of residential heat pumps in heating mode. In: Science and Technology for the Built Environment, v. 29, n. 1 (November 2022).
- (2023): Human decision making during eco-feedback intervention in smart and connected energy-aware communities. In: Energy and Buildings, v. 278 (January 2023).
- (2022): Comparing the economic performance of ice storage and batteries for buildings with on-site PV through model predictive control and optimal sizing. In: Journal of Building Performance Simulation, v. 15, n. 5 (29 June 2022).
- (2022): MPC Solution for Optimal Load Shifting for Buildings with ON/OFF Staged Packaged Units: Experimental Demonstration, and Lessons Learned. In: Energy and Buildings, v. 266 (July 2022).
- (2020): A methodology for generating reduced-order models for large-scale buildings using the Krylov subspace method. In: Journal of Building Performance Simulation, v. 13, n. 4 (May 2020).
- (2015): A general approach for generating reduced-order models for large multi-zone buildings. In: Journal of Building Performance Simulation, v. 8, n. 6 (November 2015).
- (2020): A comparative study of multi-agent control approaches for optimization of central cooling systems without significant storage. In: Science and Technology for the Built Environment, v. 26, n. 8 (July 2020).
- (2019): Assessments of demand response potential in small commercial buildings across the United States. In: Science and Technology for the Built Environment, v. 25, n. 10 (26 November 2019).
- (2019): Load-based testing methodology for fixed-speed and variable-speed unitary air conditioning equipment. In: Science and Technology for the Built Environment, v. 25, n. 2 (February 2019).
- (2017): An empirical model for simulating the effects of refrigerant charge faults on air conditioner performance. In: Science and Technology for the Built Environment, v. 23, n. 5 (June 2017).
- (2015): A generalized control heuristic and simplified model predictive control strategy for direct-expansion air-conditioning systems. In: Science and Technology for the Built Environment, v. 21, n. 6 (August 2015).
- (2015): Dynamic programming based approaches to optimal rooftop unit coordination. In: Science and Technology for the Built Environment, v. 21, n. 6 (August 2015).
- (2016): General approaches for determining the savings potential of optimal control for cooling in commercial buildings having both energy and demand charges. In: Science and Technology for the Built Environment, v. 22, n. 6 (August 2016).
- (2016): Compressor driven metal hydride heat pumps using an adsorptive slurry and isothermal compression. In: Science and Technology for the Built Environment, v. 22, n. 5 (May 2016).
- (2020): Methodology to assess "no-touch" building audit software using simulated utility data. In: Science and Technology for the Built Environment, v. 26, n. 7 (June 2020).
- (2011): Measured effect of airflow and refrigerant charge on the seasonal performance of an air-source heat pump using R-410A. In: Energy and Buildings, v. 43, n. 7 (July 2011).
- (2016): A general multi-agent control approach for building energy system optimization. In: Energy and Buildings, v. 127 (September 2016).
- (2018): Experimental investigation and data-driven regression models for performance characterization of single and multiple passive chilled beam systems. In: Energy and Buildings, v. 158 (January 2018).
- (2018): Assessments of variable-speed equipment for packaged rooftop units (RTUs) in the United States. In: Energy and Buildings, v. 164 (April 2018).
- (2020): Development, implementation, and evaluation of a fault detection and diagnostics system based on integrated virtual sensors and fault impact models. In: Energy and Buildings, v. 228 (December 2020).
- (2019): Development and evaluation of a generalized rule-based control strategy for residential ice storage systems. In: Energy and Buildings, v. 197 (August 2019).
- (2019): Energy savings potential of passive chilled beams vs air systems in various US climatic zones with different system configurations. In: Energy and Buildings, v. 186 (March 2019).
- (2019): Laboratory-based assessment of HVAC equipment for power grid frequency regulation: Methods, regulation performance, economics, indoor comfort and energy efficiency. In: Energy and Buildings, v. 185 (February 2019).
- (2018): Development, implementation and performance of a model predictive controller for packaged air conditioners in small and medium-sized commercial building applications. In: Energy and Buildings, v. 178 (November 2018).
- (2008): Model-based demand-limiting control of building thermal mass. In: Building and Environment, v. 43, n. 10 (October 2008).
- (2008): 'Evaluation of methods for determining demand-limiting setpoint trajectories in buildings using short-term measurements. In: Building and Environment, v. 43, n. 10 (October 2008).
- (2008): 'Development of methods for determining demand-limiting setpoint trajectories in buildings using short-term measurements. In: Building and Environment, v. 43, n. 10 (October 2008).
- (2007): A methodology for estimating occupant CO2 source generation rates from measurements in small commercial buildings. In: Building and Environment, v. 42, n. 2 (February 2007).
- (2006): Evaluation of simplified models for predicting CO2 concentrations in small commercial buildings. In: Building and Environment, v. 41, n. 2 (February 2006).
Structurae cooperates with
