Mohamed Boutouil 
- (2023): Hygric properties and adsorption characteristics of simple and dual coblayers of bio-sourced building materials. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Influence of Porous Structure of Non-Autoclaved Bio-Based Foamed Concrete on Mechanical Strength. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2023): Monitoring of drying kinetics evolution and hygrothermal properties of new earth-based materials using climatic chamber simulation. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Earthen-based building: In-situ drying kinetics and shrinkage. In: Construction and Building Materials, v. 369 (March 2023).
- (2023): Artificial reefs built by 3D printing: Systematisation in the design, material selection and fabrication. In: Construction and Building Materials, v. 362 (January 2023).
- (2022): Valorization of queen scallop shells in the preparation of metakaolin-based geopolymer mortars. In: Journal of Building Engineering, v. 53 (August 2022).
- (2022): Interaction between the diatom Cylindrotheca closterium and a siliceous mortar in a silica-limited environment. In: Construction and Building Materials, v. 321 (February 2022).
- (2022): Earth construction: Field variabilities and laboratory reproducibility. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Hydration of flax fibre-reinforced cementitious composites: influence of fibre surface treatments. In: European Journal of Environmental and Civil Engineering, v. 26, n. 12 (June 2021).
- (2021): Enhancement of the long-term mechanical performance of flax fiber-reinforced cementitious composites by using alternative binders. In: Journal of Building Engineering, v. 40 (August 2021).
- (2021): Improving the thermal performance of earthen walls to satisfy current building regulations. In: Energy and Buildings, v. 240 (June 2021).
- (2021): Evaluation of the influence of accelerated carbonation on the microstructure and mechanical characteristics of coconut fibre-reinforced cementitious matrix. In: Journal of Building Engineering, v. 39 (July 2021).
- (2003): Microstructure and Leaching Characteristics of Sludge Treated with Low Alkalinity Additives. In: Soils and Foundations, v. 43, n. 2 (April 2003).
- (2021): Optimisation of 3D printed concrete for artificial reefs: Biofouling and mechanical analysis. In: Construction and Building Materials, v. 272 (February 2021).
- (2020): Optimization of non-autoclaved aerated insulating foam using bio-based materials. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Reducing energy consumption of prefabricated building elements and lowering the environmental impact of concrete. In: Engineering Structures, v. 213 (June 2020).
- (2020): Recycled duvets for building thermal insulation. In: Journal of Building Engineering, v. 31 (September 2020).
- (2019): Effect of several parameters on non-autoclaved aerated concrete: use of recycling waste perlite. In: European Journal of Environmental and Civil Engineering, v. 26, n. 1 (October 2019).
- (2019): Influence of different surface treatments on the water absorption capacity of flax fibres: Rheology of fresh reinforced-mortars and mechanical properties in the hardened state. In: Construction and Building Materials, v. 199 (February 2019).
- (2013): Valorization of seashell by-products in pervious concrete pavers. In: Construction and Building Materials, v. 49 (December 2013).
- (2014): Influence of anions on the geotechnical properties of soils treated with hydraulic binders: Individual and coupling effects. In: Construction and Building Materials, v. 65 (August 2014).
- (2014): A modified method for the design of pervious concrete mix. In: Construction and Building Materials, v. 73 (December 2014).
- (2017): Durability of pervious concrete using crushed seashells. In: Construction and Building Materials, v. 135 (March 2017).
- (2017): Multi-physical properties of a structural concrete incorporating short flax fibers. In: Construction and Building Materials, v. 140 (June 2017).
- (2019): Mechanical performance of a dry mortar without cement, based on paper fly ash and blast furnace slag. In: Journal of Building Engineering, v. 22 (March 2019).
- (1999): Solidification d'une vase de dragage. In: Revue française de Génie civil, v. 3, n. 2 (January 1999).
- (2016): Properties of ordinary concretes incorporating crushed queen scallop shells. In: Materials and Structures, v. 49, n. 5 (May 2016).
- (2011): Influence de l'ajout d'un correcteur granulométrique sur les propriétés des sédiments traités aux liants hydrauliques. In: European Journal of Environmental and Civil Engineering, v. 15, n. 2 (January 2011).
- (2016): Trace and major elements' stabilisation in soils treated with hydraulic binders. In: European Journal of Environmental and Civil Engineering, v. 22, n. 6 (August 2016).
Structurae cooperates with
