Mahfoud Benzerzour 
- (2024): A novel approach based on microstructural modeling and a multi-scale model to predicting the mechanical-elastic properties of cement paste. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): One-part geopolymer based on micronized sediments and fly ash mix: Mechanical, microstructural and leaching assessment. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Geopolymer synthesis and performance paving the way for greener building material: A comprehensive study. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Microstructure and mechanical properties of geopolymers utilizing excavated soils, metakaolin and slags. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Geopolymer mortar with flash-calcined sediments cured under ambient conditions. In: Construction and Building Materials, v. 391 (August 2023).
- (2023): Mechanical and microstructural properties of just add water geopolymer cement comprised of Thermo-Mechanicalsynthesis Sediments-Fly ash mix. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): A comparative analysis of ambient-cured metakaolin geopolymer mortar and flash-calcined soil geopolymer. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Influence of fine recycled concrete aggregates use on the hydration kinetics and mechanical–microstructural properties of hydrated cement: Experimental and numerical approaches. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Efficient Multi-Composite Cement Made of Granulated Blast Furnace Slag (GBFS) and Flash-calcined Sediment. In: Civil Engineering Journal, v. 9, n. 11 (1 November 2023).
- (2023): Mechanical properties and shrinkage performance of one-part-geopolymer based on fly ash and micronized dredged sediments. In: Developments in the Built Environment, v. 16 (December 2023).
- (2023): The Development of Soil-Based 3D-Printable Mixtures: A Mix-Design Methodology and a Case Study. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2023): Developing mortar using limestone flash-calcined dredged sediment/millstone-clay cement binder (LFC). In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Development of Flash-Calcined Sediment and Blast Furnace Slag Ternary Binders. In: Buildings, v. 13, n. 2 (14 February 2023).
- (2022): Mortar mixing using treated wastewater feasibility. In: Construction and Building Materials, v. 352 (October 2022).
- (2022): Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing. In: Buildings, v. 12, n. 9 (16 September 2022).
- (2022): Recycling of dredged sediment as a raw material for the manufacture of Portland cement – Numerical modeling of the hydration of synthesized cement using the CEMHYD3D code. In: Journal of Building Engineering, v. 48 (May 2022).
- (2021): Determination of the degree of hydration of Portland cement using three different approaches: Scanning electron microscopy (SEM-BSE) and Thermogravimetric analysis (TGA). In: Case Studies in Construction Materials, v. 15 (December 2021).
- (2021): Effect of calcium sulfoaluminate cements composition on their durability. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom Ash. In: Case Studies in Construction Materials, v. 15 (December 2021).
- (2018): Durability of a cementitious matrix based on treated sediments. In: Case Studies in Construction Materials, v. 8 (June 2018).
- (2020): Effect of basalt fiber inclusion on the mechanical properties and microstructure of cement-solidified kaolinite. In: Construction and Building Materials, v. 241 (April 2020).
- (2018): A laboratory-scale experimental investigation on the reuse of a modified red mud in ceramic materials production. In: Construction and Building Materials, v. 163 (February 2018).
- (2019): Development of self-compacting mortars based on treated marine sediments. In: Journal of Building Engineering, v. 22 (March 2019).
- (2012): Mechanical properties of concrete-reinforced fibres and powders with crushed thermoset composites: The influence of fibre/matrix interaction. In: Construction and Building Materials, v. 29 (April 2012).
- (2012): Mechanical and physical properties of a cement matrix through the recycling of thermoset composites. In: Construction and Building Materials, v. 34 (September 2012).
- (2013): Composition of self compacting concrete (SCC) using the compressible packing model, the Chinese method and the European standard. In: Construction and Building Materials, v. 43 (June 2013).
- (2014): Experimental and numerical study of the structural and cracking behavior of an overlaid slab panel under cyclic flexural loading. In: Construction and Building Materials, v. 52 (February 2014).
- (2014): Influence of the distribution and orientation of fibres in a reinforced concrete with waste fibres and powders. In: Construction and Building Materials, v. 65 (August 2014).
- (2017): A bibliography on the analytical model of the mechanical behaviour in uniaxial tension of fibre concrete: Application to concrete reinforced with fibres and powders from recycling of thermoset composite materials. In: Construction and Building Materials, v. 131 (January 2017).
- (2017): New experimental approach of the reuse of dredged sediments in a cement matrix by physical and heat treatment. In: Construction and Building Materials, v. 140 (June 2017).
Structurae cooperates with
