Terry Bennett 
- (2024): Rotated Thrust Network Analysis (rTNA) for stability assessment of vaulted structures subjected to horizontal loading. In: Computers & Structures, v. 297 (July 2024).
- : Basic and drying creep of ultra-high performance concrete. In: Australian Journal of Civil Engineering.
- (2022): Plastic and early-age shrinkage of ultra-high performance concrete (UHPC): Experimental study of the effect of water to binder ratios, silica fume dosages under controlled curing conditions. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2021): Modelling of the fully coupled chemo-mechanical degradation for cement-based materials. In: Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics, v. 174, n. 3 (September 2021).
- (2021): An efficient model for laminated composite thin-walled beams of open or closed cross-section and with or without in-filled materials. In: Composite Structures, v. 256 (January 2021).
- (2020): Sulphuric Acid Resistance of Cementitious Materials: Multiscale Approach to Assessing the Degradation. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 7 (July 2020).
- (2019): Time dependent deflection of RC beams allowing for partial interaction and non-linear shrinkage. In: Materials and Structures, v. 52, n. 3 (April 2019).
- (2018): Effect of curing conditions on the mechanical properties of cement class G with the application to wellbore integrity. In: Australian Journal of Civil Engineering, v. 16, n. 2 ( 2018).
- (2019): Simulation of the degradation of oilwell cement for the prediction of long-term performance. In: Construction and Building Materials, v. 202 (March 2019).
- (2013): Clearing effects on plates subjected to blast loads. In: Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics, v. 166, n. 3 (September 2013).
- (2012): Determination of dynamic gradient elasticity length scales. In: Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics, v. 165, n. 1 (March 2012).
- (2014): Moisture transport and drying shrinkage properties of steel–fibre-reinforced-concrete. In: Construction and Building Materials, v. 73 (December 2014).
- (2019): Sulphuric acid exposure of conventional concrete and alkali-activated concrete: Assessment of test methodologies. In: Construction and Building Materials, v. 197 (February 2019).
- (2016): The effect of shrinkage cracks on the load bearing capacity of steel-fibre-reinforced roller-compacted-concrete pavements. In: Materials and Structures, v. 49, n. 6 (June 2016).
- (2017): A higher order model for inelastic response of composite beams with interfacial slip using a dissipation based arc-length method. In: Engineering Structures, v. 139 (May 2017).
- (2016): Finite-Element Modeling of Actively Confined Normal-Strength and High-Strength Concrete under Uniaxial, Biaxial, and Triaxial Compression. In: Journal of Structural Engineering (ASCE), v. 142, n. 11 (November 2016).
- (2014): Negative Phase of the Blast Load. In: International Journal of Protective Structures, v. 5, n. 1 (March 2014).
- (2014): Numerical Investigation of Blast Loading and Clearing on Small Targets. In: International Journal of Protective Structures, v. 5, n. 3 (September 2014).
- (2014): Numerical Analysis of Foam-Protected RC Members under Blast Loads. In: International Journal of Protective Structures, v. 5, n. 4 (December 2014).
- (2017): analytical model of linear density foam–protected structure under blast loading. In: International Journal of Protective Structures, v. 8, n. 3 (September 2017).
Structurae cooperates with
