Rachid Bennacer 
- (2024): Radiant systems and solar-driven overheating: A comprehensive literature analysis over a decade. In: Building and Environment, v. 259 (July 2024).
- (2024): A simplified method for thermal buckling verification in steel–concrete composite elements. In: Journal of Constructional Steel Research, v. 214 (March 2024).
- (2023): Hygrothermal and energy performance assessment of a passive building wall integrating PCM and bio-based hygroscopic material. In: Building and Environment, v. 245 (November 2023).
- (2023): Experimental evaluation of the impact of real sun patch on radiant floor heating in highly glazed spaces. In: Building and Environment, v. 244 (October 2023).
- (2010): The mini-conical slump flow test: Analysis and numerical study. In: Cement and Concrete Research, v. 40, n. 10 (October 2010).
- (2022): Effects of humidification process on thermal performance of floor heating systems: An experimental study. In: Building and Environment, v. 221 (August 2022).
- (2022): Imbibition or drying dynamics: Controlled by big and small capillaries interconnectivity. In: Construction and Building Materials, v. 323 (March 2022).
- (2022): Dynamic hygrothermal behavior and energy performance analysis of a novel multilayer building envelope based on PCM and hemp concrete. In: Construction and Building Materials, v. 341 (July 2022).
- (2021): New experimental approach to accelerate the development of internal swelling reactions (ISR) in massive concrete structures. In: Construction and Building Materials, v. 313 (December 2021).
- (2021): Experimental investigation on the hygrothermal behavior of a new multilayer building envelope integrating PCM with bio-based material. In: Building and Environment, v. 201 (August 2021).
- (2018): Thermal performance of a residential house equipped with a combined system: A direct solar floor and an earth–air heat exchanger. In: Sustainable Cities and Society, v. 40 (July 2018).
- (2013): Generic thermal model of electrical appliances in thermal building: Application to the case of a refrigerator. In: Energy and Buildings, v. 62 (July 2013).
- (2016): Residential building energy demand and thermal comfort: Thermal dynamics of electrical appliances and their impact. In: Energy and Buildings, v. 130 (October 2016).
- (2019): Thermal building control using active ventilated block integrating phase change material. In: Energy and Buildings, v. 187 (March 2019).
- (2020): NMR and XRD quantification of bound and free water interaction of spruce wood fibers. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Optimization of experiment methodology based on identification of parameters in concrete drying. In: Construction and Building Materials, v. 256 (September 2020).
- (2019): Combined use of dynamic building simulation and metamodeling to optimize glass facades for thermal comfort. In: Building and Environment, v. 157 (June 2019).
- (2020): Identifying the mechanisms of concrete drying: An experimental-numerical approach. In: Construction and Building Materials, v. 230 (January 2020).
- (2010): Practical Tribometer to Estimate Pumpability of Fresh Concrete. In: Journal of Asian Architecture and Building Engineering, v. 9, n. 1 (May 2010).
- (2019): Original experimental and numerical approach for prediction of the microscopic hygro-mechanical behavior of spruce wood. In: Construction and Building Materials, v. 203 (April 2019).
- (2011): Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS). In: Construction and Building Materials, v. 25, n. 4 (April 2011).
- (2012): Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete. In: Construction and Building Materials, v. 29 (April 2012).
- (2017): Fiber's hygromorphic effect on thermal conductivity of wooden fibrous insulation characterized by X-ray tomography. In: Construction and Building Materials, v. 150 (September 2017).
- (2011): Measurement and modeling of fresh concrete viscous constant to predict pumping pressures. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 38, n. 8 (August 2011).
- (2012): Relationships between concrete composition and boundary layer composition to optimise concrete pumpability. In: European Journal of Environmental and Civil Engineering, v. 16, n. 2 (February 2012).
- (2018): An analysis of the impact of PMV-based thermal comfort control during heating period: A case study of highly glazed room. In: Journal of Building Engineering, v. 20 (November 2018).
Structurae cooperates with
