Joaquim A. O. Barros 
- (2023): Analytical model to predict axial stress-strain behavior of heat-damaged unreinforced concrete columns wrapped by FRP jacket. In: Engineering Structures, v. 289 (August 2023).
- (2012): Direct assessment of tensile stress-crack opening behavior of Strain Hardening Cementitious Composites (SHCC). In: Cement and Concrete Research, v. 42, n. 6 (June 2012).
- (2023): Cross‐sectional and confining system unification on peak compressive strength of FRP confined concrete. In: Structural Concrete, v. 24, n. 1 (February 2023).
- (2023): Analysis-oriented model for partially FRP-and-steel-confined circular RC columns under compression. In: Engineering Structures, v. 276 (February 2023).
- (2019): Behaviour of laminar RC structures subjected to cyclic loading. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2019): Cementitious adhesives for NSM carbon laminate strengthening system with treated surfaces. Presented at: IABSE Symposium: Towards a Resilient Built Environment Risk and Asset Management, Guimarães, Portugal, 27-29 March 2019.
- (2021): Development of sandwich panels for multi-functional strengthening of RC buildings: Characterization of constituent materials and shear interaction of panel assemblies. In: Construction and Building Materials, v. 267 (January 2021).
- (2016): Deflection hardening of sustainable fiber–cement composites. In: Green Materials, v. 4, n. 1 (March 2016).
- (2021): Assessing the applicability of a smeared crack approach for simulating the behaviour of concrete beams flexurally reinforced with GFRP bars and failing in shear. In: Engineering Structures, v. 227 (January 2021).
- (2021): Effectiveness of a steel ring-frame for the seismic strengthening of masonry walls with new openings. In: Engineering Structures, v. 226 (January 2021).
- (2016): Development of a composite prototype with GFRP profiles and sandwich panels used as a floor module of an emergency house. In: Composite Structures, v. 153 (October 2016).
- (2016): Development of innovative hybrid sandwich panel slabs: Advanced numerical simulations and parametric studies. In: Composite Structures, v. 152 (September 2016).
- (2015): Development of innovative hybrid sandwich panel slabs: Experimental results. In: Composite Structures, v. 133 (December 2015).
- (2015): Assessment of the efficiency of prefabricated hybrid composite plates (HCPs) for retrofitting of damaged interior RC beam–column joints. In: Composite Structures, v. 119 (January 2015).
- (2012): A design model for fibre reinforced concrete beams pre-stressed with steel and FRP bars. In: Composite Structures, v. 94, n. 8 (July 2012).
- (2011): Development of a pedestrian bridge with GFRP profiles and fiber reinforced self-compacting concrete deck. In: Composite Structures, v. 93, n. 11 (October 2011).
- (2011): Crack constitutive model for the prediction of punching failure modes of fiber reinforced concrete laminar structures. In: Computers and Concrete, v. 8, n. 6 (December 2011).
- (2019): Assessment of different methods for characterization and simulation of post-cracking behavior of self-compacting steel fiber reinforced concrete. In: Construction and Building Materials, v. 227 (December 2019).
- (2009): CFRP-Based Strengthening Technique to Increase the Flexural and Energy Dissipation Capacities of RC Columns. In: Journal of Composites for Construction, v. 13, n. 5 (October 2009).
- (2016): Bond of NSM FRP-Strengthened Concrete: Round Robin Test Initiative. In: Journal of Composites for Construction, v. 20, n. 1 (February 2016).
- (2017): Axial Performance of Jointed Sandwich Wall Panels. In: Journal of Composites for Construction, v. 21, n. 4 (August 2017).
- (2006): Bond Behavior of Near-Surface Mounted CFRP Laminate Strips under Monotonic and Cyclic Loading. In: Journal of Composites for Construction, v. 10, n. 4 (August 2006).
- (2012): Efficiency of different techniques in flexural strengthening of RC beams under monotonic and fatigue loading. In: Construction and Building Materials, v. 29 (April 2012).
- (2015): Assessment of overlay masonry strengthening system under in-plane monotonic and cyclic loading using the diagonal tensile test. In: Construction and Building Materials, v. 94 (September 2015).
- (2016): Assessment of the properties to characterise the interface between clay brick substrate and strengthening mortar. In: Construction and Building Materials, v. 103 (January 2016).
- (2011): CFRP Flexural and Shear Strengthening Technique for RC Beams: Experimental and Numerical Research. In: Advances in Structural Engineering, v. 14, n. 3 (June 2011).
- (2017): Design Approach to Determine Shear Capacity of Reinforced Concrete Beams Shear Strengthened with NSM Systems. In: Journal of Structural Engineering (ASCE), v. 143, n. 8 (August 2017).
- (2017): Development of a High-Performance Concrete Deck for Louisiana's Movable Bridges: Numerical Study. In: Journal of Bridge Engineering (ASCE), v. 22, n. 7 (July 2017).
- (2006): Assessing the effectiveness of embedding CFRP laminates in the near surface for structural strengthening. In: Construction and Building Materials, v. 20, n. 7 (September 2006).
- (2018): Design-oriented approach to predict shear strength of reinforced concrete beams. In: Structural Concrete, v. 19, n. 1 (February 2018).
Structurae cooperates with
