William Atherton 
- (2022): The Impact of Molar Proportion of Sodium Hydroxide and Water Amount on the Compressive Strength of Slag/Metakaolin (Waste Materials) Geopolymer Mortar. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2021): Structural response of aluminium alloy concrete filled tubular columns. In: ce/papers, v. 4, n. 2-4 (September 2021).
- (2021): Flexural buckling performance of concrete-filled aluminium alloy tubular columns. In: Engineering Structures, v. 242 (September 2021).
- (2021): Potential use of sugar cane bagasse ash as sand replacement for durable concrete. In: Journal of Building Engineering, v. 39 (July 2021).
- (2018): A laboratory study of high-performance cold mix asphalt mixtures reinforced with natural and synthetic fibres. In: Construction and Building Materials, v. 172 (May 2018).
- (2018): Predicting the rutting behaviour of natural fibre-reinforced cold mix asphalt using the finite element method. In: Construction and Building Materials, v. 167 (April 2018).
- (2019): Analytical investigation of hydration mechanism of a non-Portland binder with waste paper sludge ash. In: Construction and Building Materials, v. 211 (June 2019).
- (2019): Future of clay-based construction materials – A review. In: Construction and Building Materials, v. 210 (June 2019).
- (2012): Mechanical Properties of an Upgrading Cold-Mix Asphalt Using Waste Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 12 (December 2012).
- (2013): Mechanical Behavior of a New Base Material Containing High Volumes of Limestone Waste Dust, PFA, and APC Residues. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 4 (April 2013).
- (2012): Green Bituminous Asphalt relevant for highway and airfield pavement. In: Construction and Building Materials, v. 31 (June 2012).
- (2012): A new composite cementitious material for construction. In: Construction and Building Materials, v. 35 (October 2012).
- (2012): A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials. In: Construction and Building Materials, v. 36 (November 2012).
- (2013): Mechano-chemical activation of high-Ca fly ash by cement free blending and gypsum aided grinding. In: Construction and Building Materials, v. 43 (June 2013).
- (2012): A laboratory study for full cement replacement by fly ash and silica fume. In: Magazine of Concrete Research, v. 64, n. 12 (December 2012).
- (2018): A viscoplastic model for permanent deformation prediction of reinforced cold mix asphalt. In: Construction and Building Materials, v. 186 (October 2018).
- (2018): The development of a low carbon binder produced from the ternary blending of cement, ground granulated blast furnace slag and high calcium fly ash: An experimental and statistical approach. In: Construction and Building Materials, v. 187 (October 2018).
Structurae cooperates with
