Iman Asadi 
- (2024): The acid and chloride permeability resistance of masonry cement plaster mortar incorporating high-volume fly ash content. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Reviewing the Potential of Phase Change Materials in Concrete Pavements for Anti-Freezing Capabilities and Urban Heat Island Mitigation. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): Water transport in cracks controlled by digital image correlation in wet sprayed concrete with and without an EVA based co-polymer admixture. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Anisotropy and macro porosity in wet sprayed concrete: Laminations, fibre orientation and macro pore properties measured by image analysis, PF test, water penetration and CT scanning. In: Construction and Building Materials, v. 389 (July 2023).
- (2022): Phase change materials incorporated into geopolymer concrete for enhancing energy efficiency and sustainability of buildings: A review. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Drying shrinkage properties of expanded polystyrene (EPS) lightweight aggregate concrete: A review. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2019): The effect of using low fines content sand on the fresh and hardened properties of roller-compacted concrete pavement. In: Case Studies in Construction Materials, v. 11 (December 2019).
- (2021): Thermophysical properties of sustainable cement mortar containing oil palm boiler clinker (OPBC) as a fine aggregate. In: Construction and Building Materials, v. 268 (January 2021).
- (2018): Concrete as a thermal mass material for building applications - A review. In: Journal of Building Engineering, v. 19 (September 2018).
- (2018): Thermal conductivity of concrete – A review. In: Journal of Building Engineering, v. 20 (November 2018).
Structurae cooperates with
