Angelo Aloisio 
- (2024): Dynamic characterization and FE model updating via metaheuristic algorithm of two confined masonry buildings. In: Engineering Structures, v. 308 (June 2024).
- (2023): Analysis of the Thermal Effects on the Performance and Reliability of Post‐Tensioned Integral Abutment Bridges. In: ce/papers, v. 6, n. 5 (September 2023).
- (2023): Analysis of the Joint Effects of Thermal Stresses and Corrosion on Integral Abutment Bridges. In: ce/papers, v. 6, n. 5 (September 2023).
- (2024): Aleatoric and epistemic uncertainty in the overstrength of CLT-to-CLT screwed connections. In: Engineering Structures, v. 304 (April 2024).
- (2023): 2d Models of Steel Beams under Patch Loading for Buckling Coefficient Assessment. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Effect of lateral resisting systems on the wind-induced serviceability response of tall timber buildings. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Buckling capacity model for timber screws loaded in compression: Experimental, analytical and FE investigations. In: Construction and Building Materials, v. 379 (May 2023).
- (2023): Empirical formulation for the estimate of the equivalent viscous damping of infilled RC frames. In: Engineering Structures, v. 288 (August 2023).
- (2021): Aspects of Vibration-Based Methods for the Prestressing Estimate in Concrete Beams with Internal Bonded or Unbonded Tendons. In: Infrastructures, v. 6, n. 6 (June 2021).
- (2021): Assessment of the Seismic Response of CLT Shear Walls Using the EEGBW, a Bouc–Wen Class Predictive Model. In: Infrastructures, v. 6, n. 4 (April 2021).
- (2023): Analysis and enhancement of the new Eurocode 5 formulations for the lateral elastic deformation of LTF and CLT walls. In: Structures, v. 47 (January 2023).
- (2022): Effect of Pre-Hole Filled with High-Damping Material on the Inelastic Response Spectrum of Integral Abutment Bridges. In: Journal of Earthquake Engineering, v. 27, n. 12 (November 2022).
- (2022): Corrosion effects on the capacity and ductility of concrete half-joint bridges. In: Construction and Building Materials, v. 360 (December 2022).
- (2023): Convolutional networks and transformers for intelligent road tunnel investigations. In: Computers & Structures, v. 275 (January 2023).
- (2021): Bayesian estimate of the elastic modulus of concrete box girders from dynamic identification: a statistical framework for the A24 motorway in Italy. In: Structure and Infrastructure Engineering, v. 17, n. 12 (November 2021).
- (2022): Capacity model of CLT walls with openings and timber plasticization. In: Engineering Structures, v. 264 (August 2022).
- (2023): Effect of pinching on structural resilience: performance of reinforced concrete and timber structures under repeated cycles. In: Structure and Infrastructure Engineering, v. 19, n. 12 (April 2023).
- (2022): Design of a novel seismic retrofitting system for RC structures based on asymmetric friction connections and CLT panels. In: Engineering Structures, v. 254 (March 2022).
- (2022): Dynamic assessment, FE modelling and parametric updating of a butterfly-arch stress-ribbon pedestrian bridge. In: Structure and Infrastructure Engineering, v. 18, n. 7 (April 2022).
- (2021): Dynamic characteristics of a curved steel–concrete composite cable-stayed bridge and effects of different design choices. In: Structures, v. 34 (December 2021).
- (2021): Dynamic Characterization of Timber Floor Subassemblies: Sensitivity Analysis and Modeling Issues. In: Journal of Structural Engineering (ASCE), v. 147, n. 12 (December 2021).
- (2021): An empirical transcendental hysteresis model for structural systems with pinching and degradation. In: Earthquake Engineering and Structural Dynamics, v. 50, n. 9 (25 July 2021).
- (2019): The architrave a tasselli. In: Case Studies in Construction Materials, v. 11 (December 2019).
- (2021): Bending Stiffness Identification of Simply Supported Girders using an Instrumented Vehicle: Full Scale Tests, Sensitivity Analysis, and Discussion. In: Journal of Bridge Engineering (ASCE), v. 26, n. 1 (January 2021).
- (2022): Assessment of Seismic Retrofitting Interventions of a Masonry Palace Using Operational Modal Analysis. In: International Journal of Architectural Heritage, v. 16, n. 5 (December 2022).
- (2020): Dynamic identification and model updating of full-scale concrete box girders based on the experimental torsional response. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Dynamic identification and model updating of an eight-storey CLT building. In: Engineering Structures, v. 213 (June 2020).
- (2021): Assessment of structural interventions using Bayesian updating and subspace-based fault detection methods: the case study of S. Maria di Collemaggio basilica, L’Aquila, Italy. In: Structure and Infrastructure Engineering, v. 17, n. 2 (March 2021).
- (2019): Dynamic identification of a masonry façade from seismic response data based on an elementary Ordinary Least Squares approach. In: Engineering Structures, v. 197 (October 2019).
- (2020): The 18th-Century Baraccato of L'Aquila. In: International Journal of Architectural Heritage, v. 14, n. 6 ( 2020).
Structurae cooperates with
