0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

M. R. M. Aliha ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Baradaran, Sajed / Aliha, M. R. M. / Maleki, Ali / Underwood, B. Shane (2024): Fracture properties of asphalt mixtures containing high content of reclaimed asphalt pavement (RAP) and eco-friendly PET additive at low temperature. In: Construction and Building Materials, v. 449 (October 2024).

    https://doi.org/10.1016/j.conbuildmat.2024.138426

  2. Bazoobandi, Payam / Mousavi, Seyed Roohollah / Karimi, Farman / Karimi, Hamid Reza / Ghasri, Mehdi / Aliha, M. R. M. (2024): Cracking resistance of crumb rubber modified green asphalt mixtures, using calcium carbonate nanoparticles and two by-product wax-based warm mix additives. In: Construction and Building Materials, v. 424 (April 2024).

    https://doi.org/10.1016/j.conbuildmat.2024.135848

  3. Aliha, M. R. M. / Zalnezhad, Mahdi / Haghighatpour, Pegah Jafari (2023): Fracture toughness of colored slurry seal at low temperatures and different loading Modes: Comparative study with warm and hot mix asphalt materials. In: Construction and Building Materials, v. 409 (December 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.133786

  4. Saesaei, Amir Hossein / Sahaf, Ali / Najjar, Shima / Aliha, M. R. M. (2024): Laboratory investigation on the fracture toughness (Mode I) and durability properties of eco-friendly cement emulsified asphalt mortar (CRTS II) exposed to acid attack. In: Case Studies in Construction Materials, v. 20 (July 2024).

    https://doi.org/10.1016/j.cscm.2023.e02719

  5. Bazoobandi, Payam / Karimi, Hamid Reza / Mousavi, Seyed Roohollah / Karimi, Farman / Aliha, M. R. M. (2023): Full range of mode I and II cracking performance of asphalt mixtures containing low to high reclaimed asphalt pavement (RAP) contents; modified by recycling agent and substituting of a softer binder. In: Case Studies in Construction Materials, v. 19 (December 2023).

    https://doi.org/10.1016/j.cscm.2023.e02487

  6. Karimi, Hamid Reza / Bidadi, Jamal / Aliha, M. R. M. / Mousavi, Amir / Mohammadi, M. H. / Haghighatpour, Pegah Jafari (2023): An experimental study and theoretical evaluation on the effect of specimen geometry and loading configuration on recorded fracture toughness of brittle construction materials. In: Journal of Building Engineering, v. 75 (September 2023).

    https://doi.org/10.1016/j.jobe.2023.106759

  7. Shaker, Hamid / Ameri, Mahmoud / Aliha, M. R. M. / Rooholamini, Hamed (2023): Evaluating Low-Temperature fracture toughness of steel slag Aggregate-Included asphalt mixture using response surface method. In: Construction and Building Materials, v. 370 (March 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.130647

  8. Karimi, Hamid Reza / Aliha, M. R. M. / Khedri, Ehsan / Mousavi, Amir / Salehi, S. M. / Haghighatpour, Pegah Jafari / Ebneabbasi, Pouyan (2023): Strength and cracking resistance of concrete containing different percentages and sizes of recycled tire rubber granules. In: Journal of Building Engineering, v. 67 (May 2023).

    https://doi.org/10.1016/j.jobe.2023.106033

  9. Karimi, Hamid Reza / Khedri, Ehsan / Aliha, M. R. M. / Shaker, Hamid / Haghighatpour, Pegah Jafari (2023): Repair efficiency evaluation for cracked asphalt mixture pavement in different ambient temperatures using bitumen and polymer concrete as repair materials. In: Construction and Building Materials, v. 369 (March 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.130556

  10. Najjar, Shima / Mohammadzadeh Moghaddam, Abolfazl / Sahaf, Ali / Aliha, M. R. M. (2022): Mixed mode-I/II fatigue performance of Cement Emulsified Asphalt Mortar: Experimental and statistical analysis at intermediate temperature. In: Construction and Building Materials, v. 350 (October 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.128835

  11. Fuan, Si / Ke, Ma / Kanghe, Liu / Kun, Li / Aliha, M. R. M. (2021): Influence of specimen geometry on mode I fracture toughness of asphalt concrete. In: Construction and Building Materials, v. 276 (March 2021).

    https://doi.org/10.1016/j.conbuildmat.2020.122181

  12. Aliha, M. R. M. / Bagherifard, S. / Akhondi, Sh. / Mousavi, SS. / Mousavi, A. / Parsania, H. (2018): Fracture and microstructural study of bovine bone under mixed mode I/II loading. In: Procedia Structural Integrity, v. 13 ( 2018).

    https://doi.org/10.1016/j.prostr.2018.12.306

  13. Aliha, M. R. M. / Karimi, Hamid Reza / Abedi, Milad (2022): The role of mix design and short glass fiber content on mode-I cracking characteristics of polymer concrete. In: Construction and Building Materials, v. 317 (January 2022).

    https://doi.org/10.1016/j.conbuildmat.2021.126139

  14. Saed, Seyed Ataollah / Karimi, Hamid Reza / Rad, Sina Mousavi / Aliha, M. R. M. / Shi, Xijun / Haghighatpour, Pegah Jafari (2022): Full range I/II fracture behavior of asphalt mixtures containing RAP and rejuvenating agent using two different 3-point bend type configurations. In: Construction and Building Materials, v. 314 (January 2022).

    https://doi.org/10.1016/j.conbuildmat.2021.125590

  15. Yousefi, Afshar A. / Sobhi, Saeid / Aliha, M. R. M. / Pirmohammad, Sadjad / Haghshenas, Hamzeh F. (2021): Cracking Properties of Warm Mix Asphalts Containing Reclaimed Asphalt Pavement and Recycling Agents under Different Loading Modes. In: Construction and Building Materials, v. 300 (September 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.124130

  16. Aliha, M. R. M. / Heidari-Rarani, M. / Shokrieh, M. M. / Ayatollahi, M. R. (2012): Experimental determination of tensile strength and KIcof polymer concretes using semi-circular bend (SCB) specimens. In: Structural Engineering and Mechanics, v. 43, n. 6 (September 2012).

    https://doi.org/10.12989/sem.2012.43.6.823

  17. Aliha, M. R. M. / Ghazi, Hussein / Ataei, Farkhondeh (2019): Experimental fracture resistance study for cracked bovine femur bone samples. In: Frattura ed Integrità Strutturale, v. 13, n. 50 (September 2019).

    https://doi.org/10.3221/igf-esis.50.51

  18. Aliha, M. R. M. / Fakhri, M. / Haghighat Kharrazi, E. / Berto, F. (2017): The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes. In: Frattura ed Integrità Strutturale, v. 12, n. 43 (December 2017).

    https://doi.org/10.3221/igf-esis.43.09

  19. Fakhri, Mansour / Ali Siyadati, Sayyed / Aliha, M. R. M. (2020): Impact of freeze–thaw cycles on low temperature mixed mode I/II cracking properties of water saturated hot mix asphalt: An experimental study. In: Construction and Building Materials, v. 261 (November 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.119939

  20. Rooholamini, H. / Hassani, A. / Aliha, M. R. M. (2018): Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology. In: Construction and Building Materials, v. 159 (January 2018).

    https://doi.org/10.1016/j.conbuildmat.2017.11.002

  21. Sharifi, Ebrahim / Sadjadi, Seyed Jafar / Aliha, M. R. M. / Moniri, Ali (2020): Optimization of high-strength self-consolidating concrete mix design using an improved Taguchi optimization method. In: Construction and Building Materials, v. 236 (March 2020).

    https://doi.org/10.1016/j.conbuildmat.2019.117547

  22. Motamedi, Hamed / Fazaeli, Hassan / Aliha, M. R. M. / Reza Amiri, Hamid (2020): Evaluation of temperature and loading rate effect on fracture toughness of fiber reinforced asphalt mixture using edge notched disc bend (ENDB) specimen. In: Construction and Building Materials, v. 234 (February 2020).

    https://doi.org/10.1016/j.conbuildmat.2019.117365

  23. Ziari, Hassan / Aliha, M. R. M. / Moniri, Ali / Saghafi, Yasha (2020): Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber. In: Construction and Building Materials, v. 230 (January 2020).

    https://doi.org/10.1016/j.conbuildmat.2019.117015

  24. Aliha, M. R. M. / Pakzad, R. / Ayatollahi, M. R. (2014): Numerical Analyses of a Cracked Straight-Through Flattened Brazilian Disk Specimen under Mixed-Mode Loading. In: Journal of Engineering Mechanics (ASCE), v. 140, n. 1 (January 2014).

    https://doi.org/10.1061/(asce)em.1943-7889.0000651

  25. Aliha, M. R. M. / Behbahani, H. / Fazaeli, H. / Rezaifar, M. H. (2014): Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. In: Construction and Building Materials, v. 54 (March 2014).

    https://doi.org/10.1016/j.conbuildmat.2013.12.097

  26. Heidari-Rarani, M. / Aliha, M. R. M. / Shokrieh, M. M. / Ayatollahi, M. R. (2014): Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings – An experimental study. In: Construction and Building Materials, v. 64 (August 2014).

    https://doi.org/10.1016/j.conbuildmat.2014.04.031

  27. Aliha, M. R. M. / Fazaeli, H. / Aghajani, S. / Nejad, F. Moghadas (2015): Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures. In: Construction and Building Materials, v. 95 (October 2015).

    https://doi.org/10.1016/j.conbuildmat.2015.07.165

  28. Aliha, M. R. M. / Sarbijan, M. J. / Bahmani, A. (2017): Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations. In: Construction and Building Materials, v. 155 (November 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.08.093

  29. Rooholamini, H. / Hassani, A. / Aliha, M. R. M. (2018): Fracture properties of hybrid fibre-reinforced roller-compacted concrete in mode I with consideration of possible kinked crack. In: Construction and Building Materials, v. 187 (October 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.07.177

  30. Aliha, M. R. M. / Razmi, A. / Mousavi, A. (2018): Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen. In: Construction and Building Materials, v. 190 (November 2018).

    https://doi.org/10.1016/j.conbuildmat.2018.09.149

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine