Shamsad Ahmad 
- (2023): Enhancing the seismic resilience of structures by using optimum combination of tuned mass damper inerter and negative stiffness damper. In: Structures, v. 57 (November 2023).
- (2023): Development of an atomistic model of cement-incorporated nano-red mud material. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Microstructural and strength variations in natural sands exposed to diverse environmental conditions. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Performance and efficiency of self-healing geopolymer technologies: A review. In: Construction and Building Materials, v. 386 (July 2023).
- (2023): Effect of early‐strengthening of RC beams using UHPC layers on their performance against reinforcement corrosion. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2022): An Experimental Approach to Evaluate the Effect of Reinforcement Corrosion on Flexural Performance of RC Beams. In: Buildings, v. 12, n. 12 (1 December 2022).
- (2023): Optimization of alkali-activated binders using natural minerals and industrial waste materials as precursor materials. In: Journal of Building Engineering, v. 69 (June 2023).
- (2023): Flexural performance of pre-damaged RC beams strengthened with different configurations of UHPFRC layer –experimental and analytical investigation. In: Structures, v. 48 (February 2023).
- (2022): Compressive strength evolution of concrete incorporating hyperalkaline cement waste-derived portlandite. In: Construction and Building Materials, v. 358 (December 2022).
- (2022): Experimental and analytical study on the effect of different repairing and strengthening strategies on flexural performance of corroded RC beams. In: Structures, v. 46 (December 2022).
- (2022): Carbon dioxide sequestration characteristics of concrete mixtures incorporating high-volume cement kiln dust. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Effect of silica fume inclusion on the strength, shrinkage and durability characteristics of natural pozzolan-based cement concrete. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Effect of different treatments of crumb rubber on the durability characteristics of rubberized concrete. In: Construction and Building Materials, v. 318 (February 2022).
- (2022): Improvement of concrete durability using nanocomposite coating prepared by mixing epoxy coating with Submicron/Nano-carbon obtained from heavy fuel oil ash. In: Construction and Building Materials, v. 325 (March 2022).
- (2022): Effects of key factors on the compressive strength of metakaolin and limestone powder-based alkali-activated concrete mixtures: An experimental and statistical study. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Interfacial bond behavior between ultra high performance concrete and normal concrete substrates. In: Construction and Building Materials, v. 320 (February 2022).
- (2021): Numerical and analytical modeling of seismic behavior of beam-column joints retrofitted with ultra-high performance fiber reinforced concrete. In: Structures, v. 32 (August 2021).
- (2020): Effect of sugar dosage on setting time, microstructure and strength of Type I and Type V Portland cements. In: Case Studies in Construction Materials, v. 13 (December 2020).
- (2020): Effect of abrasion and chemical treatment of recycled aggregate on the workability, strength, and durability properties of concrete. In: European Journal of Environmental and Civil Engineering, v. 26, n. 8 (September 2020).
- (2020): Effect of total dissolved solids-contaminated water on the properties of concrete. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Development of a concrete set retarder utilizing electric arc furnace dust. In: Construction and Building Materials, v. 255 (September 2020).
- (2019): Influence of accelerated carbonation curing on the properties of self-compacting concrete mixtures containing different mineral fillers. In: European Journal of Environmental and Civil Engineering, v. 26, n. 1 (October 2019).
- (2019): Experimental and Numerical Investigation of Shear Behavior of RC Beams Strengthened by Ultra-High Performance Concrete. In: International Journal of Concrete Structures and Materials, v. 13, n. 1 (January 2019).
- (2008): Compliance criteria for quality concrete. In: Construction and Building Materials, v. 22, n. 6 (June 2008).
- (2014): A comparative study of corrosion resistance of different coatings for mortar–embedded steel plates. In: Construction and Building Materials, v. 56 (April 2014).
- (2015): Effect of key mixture parameters on flow and mechanical properties of reactive powder concrete. In: Construction and Building Materials, v. 99 (November 2015).
- (2017): Effects of carbonation pressure and duration on strength evolution of concrete subjected to accelerated carbonation curing. In: Construction and Building Materials, v. 136 (April 2017).
- (2019): Influence of admixing natural pozzolan as partial replacement of cement and microsilica in UHPC mixtures. In: Construction and Building Materials, v. 198 (February 2019).
- (2012): Effect of the Key Mixture Parameters on Tortuosity and Permeability of Concrete. In: Journal of Advanced Concrete Technology, v. 10, n. 3 ( 2012).
- (2018): Numerical investigation of the shear behavior of reinforced ultra-high-performance concrete beams. In: Structural Concrete, v. 19, n. 1 (February 2018).
Structurae cooperates with
