Mohamed Abd Elrahman 
- (2024): Durability and ecological assessment of low-carbon high-strength concrete with short AR-glass fibers: Effects of high-volume of solid waste materials. In: Construction and Building Materials, v. 429 (May 2024).
- (2024): Application of pretreated dealuminated kaolin as a modifier agent for alkali-activated slag cement. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): A comparative study on the role of metakaolin and diatomite in the performance of eco-friendly dolomite waste–based alkali-activated binder. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Characterization and optimization of fresh and hardened properties of ultra-high performance geopolymer concrete. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Mechanical properties, high temperature resistance and microstructure of eco-friendly ultra-high performance geopolymer concrete: Role of ceramic waste addition. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): From dolomite waste to katoite-based binder: Synthesis, performance and characterization. In: Journal of Building Engineering, v. 75 (September 2023).
- (2023): Development and characterization of sustainable concrete incorporating a high volume of industrial waste materials. In: Construction and Building Materials, v. 365 (February 2023).
- (2022): Enhancing sustainability of ultra-high performance concrete utilizing high-volume waste glass powder. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2023): Microstructural investigation of mortars incorporating cockle shell and waste fishing net. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2022): Insight into the microstructural and durability characteristics of 3D printed concrete: Cast versus printed specimens. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Preparation and characterization of a novel alkali-activated magnesite cement. In: Construction and Building Materials, v. 345 (August 2022).
- (2021): Evaluation of the effects of bismuth oxide (Bi2O3) micro and nanoparticles on the mechanical, microstructural and γ-ray/neutron shielding properties of Portland cement pastes. In: Construction and Building Materials, v. 284 (May 2021).
- (2021): The effects of nanosilica on the fresh and hardened properties of 3D printable mortars. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Characterization of foamed concrete with different additives using multi-scale micro-computed tomography. In: Construction and Building Materials, v. 319 (February 2022).
- (2021): Pore and Solid Characterizations of Interfacial Transition Zone of Mortar Using Microcomputed Tomography Images. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (December 2021).
- (2016): Investigation of the effects of anisotropic pores on material properties of insulating concrete using computed tomography and probabilistic methods. In: Energy and Buildings, v. 125 (August 2016).
- (2020): Evaluating the effects of nanosilica on the material properties of lightweight and ultra-lightweight concrete using image-based approaches. In: Construction and Building Materials, v. 264 (December 2020).
- (2020): Modeling of multiple phase solid microstructures and prediction of mechanical behaviors of foamed concrete. In: Construction and Building Materials, v. 248 (July 2020).
- (2018): Performance assessment of core-shell structured lightweight aggregate produced by cold bonding pelletization process. In: Construction and Building Materials, v. 179 (August 2018).
- (2018): An experimental investigation of the mechanical performance and structural application of LECA-Rubcrete. In: Construction and Building Materials, v. 175 (June 2018).
- (2019): Comparison of lightweight aggregate and foamed concrete with the same density level using image-based characterizations. In: Construction and Building Materials, v. 211 (June 2019).
- (2019): Incorporation of magnetite powder as a cement additive for improving thermal resistance and gamma-ray shielding properties of cement-based composites. In: Construction and Building Materials, v. 204 (April 2019).
- (2014): Combined effect of fine fly ash and packing density on the properties of high performance concrete: An experimental approach. In: Construction and Building Materials, v. 58 (May 2014).
- (2015): Influence of hydrothermal conditions with 200°C and 15.5bars on the properties of hardened HPC. In: Construction and Building Materials, v. 85 (June 2015).
- (2016): Investigation of characteristics and responses of insulating cement paste specimens with Aer solids using X-ray micro-computed tomography. In: Construction and Building Materials, v. 118 (August 2016).
- (2016): Effects of anisotropic voids on thermal properties of insulating media investigated using 3D printed samples. In: Construction and Building Materials, v. 111 (May 2016).
- (2019): Effect of different expanded aggregates on the properties of lightweight concrete. In: Magazine of Concrete Research, v. 71, n. 2 (January 2019).
- (2017): The Effects of Anisotropic Insulations with Different Spatial Distributions on Material Properties of Mortar Specimens. In: International Journal of Concrete Structures and Materials, v. 11, n. 4 (December 2017).
- (2018): Effects of expanded polystyrene (EPS) sizes and arrangements on the properties of lightweight concrete. In: Materials and Structures, v. 51, n. 3 (June 2018).
- (2018): The influence of different concrete additions on the properties of lightweight concrete evaluated using experimental and numerical approaches. In: Construction and Building Materials, v. 189 (November 2018).
Structurae cooperates with
