-
Mojibi, M. S. / Shariq, M. / Masood, A. / Mahdi, F. / Abbas, H. (2023): Residual load capacity of HVFA reinforced concrete after elevated temperature heating: Experimental and analytical study. In: Construction and Building Materials, v. 399 (October 2023).
https://doi.org/10.1016/j.conbuildmat.2023.132569
-
Siddiqui, N. A. / Abbas, H. (2002): Mechanics of missile penetration into geo-materials. In: Structural Engineering and Mechanics, v. 13, n. 6 (June 2002).
https://doi.org/10.12989/sem.2002.13.6.639
-
Almusallama, T. H. / Elsanadedya, H. M. / Abbas, H. / Alsayeda, S. H. / Al-Salloum, Y. A. (2010): Progressive collapse analysis of a RC building subjected to blast loads. In: Structural Engineering and Mechanics, v. 36, n. 3 (October 2010).
https://doi.org/10.12989/sem.2010.36.3.301
-
Khan, M. S. / Almutairi, Saud / Abbas, H. (2020): Mechanical properties of concrete subjected to cyclic thermal loading. In: European Journal of Environmental and Civil Engineering, v. 26, n. 7 (July 2020).
https://doi.org/10.1080/19648189.2020.1782771
-
Shariq, M. / Abbas, H. / Irtaza, H. / Qamaruddin, M. (2008): Influence of openings on seismic performance of masonry building walls. In: Building and Environment, v. 43, n. 7 (July 2008).
https://doi.org/10.1016/j.buildenv.2007.03.005
-
Al-Salloum, Yousef / Alsayed, Saleh / Almusallam, Tarek / Ibrahim, S. M. / Abbas, H. (2014): Investigations on the influence of radial confinement in the impact response of concrete. In: Computers and Concrete, v. 14, n. 6 (December 2014).
https://doi.org/10.12989/cac.2014.14.6.675
-
Al-Salloum, Yousef A. / Shah, Abid A. / Abbas, H. / Alsayed, Saleh H. / Almusallam, Tarek H. / Al-Haddad, M. S. (2012): Prediction of compressive strength of concrete using neural networks. In: Computers and Concrete, v. 10, n. 2 (August 2012).
https://doi.org/10.12989/cac.2012.10.2.197
-
Khan, M. A. / Siddiqui, N. A. / Abbas, H. (2004): Reliability analysis of latticed steel towers against wind induced displacement. In: Steel and Composite Structures, v. 4, n. 1 (February 2004).
https://doi.org/10.12989/scs.2004.4.1.009
-
Amanullah, M. / Siddiqui, N. A. / Umar, A. / Abbas, H. (2002): Fatigue reliability analysis of welded joints of a TLP tether system. In: Steel and Composite Structures, v. 2, n. 5 (October 2002).
https://doi.org/10.12989/scs.2002.2.5.331
-
Elsanadedy, H. M. / Almusallam, T. H. / Alharbi, Y. R. / Al-Salloum, Y. A. / Abbas, H. (2014): Progressive collapse potential of a typical steel building due to blast attacks. In: Journal of Constructional Steel Research, v. 101 (October 2014).
https://doi.org/10.1016/j.jcsr.2014.05.005
-
Akhtar, J. N. / Ahmad, T. / Akhtar, M. N. / Abbas, H. (2014): Influence of Fibers and Fly Ash on Mechanical Properties of Concrete. In: American Journal of Civil Engineering and Architecture, v. 2, n. 2 (April 2014).
https://doi.org/10.12691/ajcea-2-2-2
-
Elsanadedy, H. M. / Al-Salloum, Y. A. / Al-Zaheri, Z. M. / Alsayed, S. H. / Abbas, H. (2016): Behavior and Design Aspects of FRP-Strengthened URM Walls under Out-of-Plane Loading. In: Journal of Composites for Construction, v. 20, n. 6 (December 2016).
https://doi.org/10.1061/(asce)cc.1943-5614.0000695
-
Elsanadedy, H. M. / Abbas, H. / Al-Salloum, Y. A. / Almusallam, T. H. (2014): Prediction of Intermediate Crack Debonding Strain of Externally Bonded FRP Laminates in RC Beams and One-Way Slabs. In: Journal of Composites for Construction, v. 18, n. 5 (October 2014).
https://doi.org/10.1061/(asce)cc.1943-5614.0000462
-
Umar, A. / Abbas, H. / Qadeer, A. / Sehgal, D. K. (1996): Prediction of error in finite element results. In: Computers & Structures, v. 60, n. 3 (August 1996).
https://doi.org/10.1016/0045-7949(95)00411-4
-
Abbas, H. / Paul, D. K. / Godbole, P. N. / Nayak, G. C. (1995): Reaction-time response of aircraft crash. In: Computers & Structures, v. 55, n. 5 (June 1995).
https://doi.org/10.1016/0045-7949(94)e0270-c
-
Islam, N. / Abbas, H. / Jain, P. C. (1994): A computer-oriented procedure for the yield line analysis of slabs. In: Computers & Structures, v. 52, n. 3 (August 1994).
https://doi.org/10.1016/0045-7949(94)90227-5
-
Shah, Abid A. / Alsayed, Saleh H. / Abbas, H. / Al-Salloum, Yousef A. (2012): Predicting residual strength of non-linear ultrasonically evaluated damaged concrete using artificial neural network. In: Construction and Building Materials, v. 29 (April 2012).
https://doi.org/10.1016/j.conbuildmat.2011.10.038
-
Morsy, M. S. / Al-Salloum, Y. A. / Abbas, H. / Alsayed, S. H. (2012): Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures. In: Construction and Building Materials, v. 35 (October 2012).
https://doi.org/10.1016/j.conbuildmat.2012.04.099
-
Khan, M. S. / Prasad, J. / Abbas, H. (2013): Bond strength of RC beams subjected to cyclic thermal loading. In: Construction and Building Materials, v. 38 (January 2013).
https://doi.org/10.1016/j.conbuildmat.2012.09.018
-
Shariq, Mohd. / Prasad, Jagdish / Abbas, H. (2013): Effect of GGBFS on age dependent static modulus of elasticity of concrete. In: Construction and Building Materials, v. 41 (April 2013).
https://doi.org/10.1016/j.conbuildmat.2012.12.035
-
Mahdi, Fareed / Abbas, H. / Khan, Asif Ali (2013): Flexural, shear and bond strength of polymer concrete utilizing recycled resin obtained from post consumer PET bottles. In: Construction and Building Materials, v. 44 (July 2013).
https://doi.org/10.1016/j.conbuildmat.2013.03.081
-
Alsayed, S. H. / Almusallam, T. H. / Ibrahim, S. M. / Al-Hazmi, N. M. / Al-Salloum, Y. A. / Abbas, H. (2014): Experimental and numerical investigation for compression response of CFRP strengthened shape modified wall-like RC column. In: Construction and Building Materials, v. 63 (July 2014).
https://doi.org/10.1016/j.conbuildmat.2014.04.047
-
Alsayed, Saleh H. / Elsanadedy, H. M. / Al-Zaheri, Zaki M. / Al-Salloum, Yousef A. / Abbas, H. (2016): Blast response of GFRP-strengthened infill masonry walls. In: Construction and Building Materials, v. 115 (July 2016).
https://doi.org/10.1016/j.conbuildmat.2016.04.053
-
Al-Salloum, Yousef / Hadi, S. / Abbas, H. / Almusallam, Tarek / Moslem, M. A. (2017): Bio-induction and bioremediation of cementitious composites using microbial mineral precipitation – A review. In: Construction and Building Materials, v. 154 (November 2017).
https://doi.org/10.1016/j.conbuildmat.2017.07.203
-
Morsy, M. S. / Al-Salloum, Y. A. / Almusallam, T. H. / Abbas, H. (2016): Mechanical properties, phase composition and microstructure of activated Metakaolin-slaked lime binder. In: KSCE Journal of Civil Engineering, v. 21, n. 3 (May 2016).
https://doi.org/10.1007/s12205-016-0667-2
-
Khan, M. S. / Abbas, H. (2014): Effect of elevated temperature on the behavior of high volume fly ash concrete. In: KSCE Journal of Civil Engineering, v. 19, n. 6 (December 2014).
https://doi.org/10.1007/s12205-014-1092-z
-
Al-Salloum, Y. A. / Almusallam, T. H. / Khawaji, M. Y. / Ngo, T. / Elsanadedy, H. M. / Abbas, H. (2015): Progressive Collapse Analysis of RC Buildings against Internal Blast. In: Advances in Structural Engineering, v. 18, n. 12 (December 2015).
https://doi.org/10.1260/1369-4332.18.12.2181
-
Abbas, H. (1971): Calcul de l'autocontrainte par la programmation linéaire pour une structure à mode de ruine partiel. In: Construction Métallique, n. 2 ( 1971).
-
Abbas, H. / Bitar, Daniel / Lukic, M. (1997): Effet de la température dans les ponts mixtes. Comparaison entre les règlements français et les Eurocodes. In: Construction Métallique, n. 1 ( 1997).
-
Abbas, H. (1990): Proposition d'une formule approchée pour la résistance au feu de poteaux en acier. In: Construction Métallique, n. 4 ( 1990).