0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

General Information

Completion: 1898
Status: in use

Project Type

Awards and Distinctions

2005 Merit Award  

Location

Location: , , ,
Address: Gay Street
Crosses:
  • Tennessee River
Coordinates: 35° 57' 30.36" N    83° 54' 52.15" W
Show coordinates on a map

Technical Information

Dimensions

main span 76.81 m
width 9.08 m
total length 452.93 m

Materials

truss steel

Excerpt from Wikipedia

The Gay Street Bridge is a vehicle bridge that crosses the Tennessee River in Knoxville, Tennessee, United States. Completed in 1898, the 1,512-foot (461 m) bridge is the oldest of four vehicle bridges connecting Downtown Knoxville with South Knoxville, the other three being the Henley Street Bridge, the James E. "Buck" Karnes Bridge (Alcoa Highway), and the James C. Ford Memorial Bridge.

Design

The bridge is a steel spandrel-braced (cantilever) arched design with a concrete deck. There are five arched trusses, each 252 feet (77 m) long, and two 126-foot (38 m) approach spans at each end, all supported by a foundation of stone piers. The deck is 42 feet (13 m) wide, and consists of two vehicle lanes, each flanked by a pedestrian sidewalk. The bridge originally contained trolley tracks, but these were removed in 1938.

History

The first bridge across the Tennessee River at this site was a temporary pontoon bridge built during the American Civil War. It was followed by a permanent bridge with stone supporting piers, built by Union General Ambrose E. Burnside, that was washed away in a flood in March 1867. Knox County built a covered bridge at the site, which opened on May 2, 1875, but it was blown down by a tornado shortly afterward. The county sold the surviving piers and rights-of-way to G. W. Saulpaw, who built a wooden Howe truss bridge at the site in 1880. Saulpaw's bridge stood until 1898, when it was demolished after the completion of the Gay Street Bridge.

The Gay Street Bridge was designed by Charles E. Fowler, chief engineer of the Youngstown Bridge Company of Ohio. Fowler later boasted that he had hastily sketched the bridge's design—which was chosen over three other bids—on the back of an envelope during his train ride to Knoxville to meet with county officials. Construction of the bridge, which was supervised by Fowler, began in 1897. Due to the scarcity of certain building materials during the Spanish–American War, Fowler was forced to modify his original design, and was constantly bickering with Knox County officials over who should pay the extra costs.

The Gay Street Bridge opened to traffic on July 9, 1898. Knox County issued a statement proclaiming the bridge "for the use of all the world except Spain," in reference to the war which had been raging throughout the year. Engineering journals such as Engineering News and Bridge Engineering praised the bridge's combination of safety and aesthetics. Because the 1898 bridge included trolley tracks, ist construction accelerated residential development in the Island Home Park area on the south side of the river, which previously had been isolated from downtown Knoxville.

After receiving poor safety ratings, the bridge was extensively repaired in a project that required ist closure from December 2001 to April 2004. Repairs included replacement of rusted pin joints and bearings and replacement of concrete on the bridge deck.

Text imported from Wikipedia article "Gay Street Bridge" and modified on 7 December 2023 according to the CC-BY-SA 3.0 license.

 

Participants

Rehabilitation
Engineers of Record
General contractor
Steel detailing
Steel fabrication

Relevant Web Sites

  • About this
    data sheet
  • Structure-ID
    20050999
  • Published on:
    27/12/2009
  • Last updated on:
    11/11/2023
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine