Journal of Building Engineering - janvier 2021

Publié:	janvier 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ahmed, Shafayet / Arocho, Ingrid	Analysis of cost comparison and effects of change orders during construction: Study of a mass timber and a concrete building project	101856
Machado, Luciana de Velasco / de Oliveira, Ualison Rébula	Analysis of failures in the accessibility of university buildings	101654
Losi, Gianluca / Bonzanini, Arianna / Aquino, Andrea / Poesio, Pietro	Analysis of thermal comfort in a football stadium designed for hot and humid climates by CFD	101599
Varela-Boydo, C. A. / Moya, S. L. / Watkins, R.	Analysis of traditional windcatchers and the effects produced by changing the size, shape, and position of the outlet opening	101828
Li, Zheng / Luo, Jing / He, Minjuan / He, Guirong / Sun, Yongliang	Analytical prediction of the fire resistance of the glulam bolted connections under coupled moment and shear	101531
Onésippe-Potiron, Cristel / Bilba, Ketty / Zaknoune, Atika / Arsène, Marie-Ange	Auto-coherent homogenization applied to the assessment of thermal conductivity: Case of sugar cane bagasse fibers and moisture content effect	101537
Talebjedi, B. / Behbahaninia, A.	Availability analysis of an Energy Hub with CCHP system for economical design in terms of Energy Hub operator	101564
Faria Correa Thompson Flores, Juliana / Bertone, Edoardo / Sahin, Oz / Stewart, Rodney	Bayesian Network revealing evidence-based strategies to enhance the performance of building envelope openings subject to wind-driven rain	101565
Elkhapery, Basel / Kianmehr, Peiman / Doczy, Ryan	Benefits of retrofitting school buildings in accordance to LEED v4	101798
Khaksefidi, Samaneh / Ghalehnovi, Mansour / de Brito, Jorge	Bond behaviour of high-strength steel rebars in normal (NSC) and ultra-high performance concrete (UHPC)	101592
Shi, Hongsen / Chen, Qian	Building energy management decision-making in the real world: A comparative study of HVAC cooling strategies	101869
Furtado, André / Rodrigues, Hugo / Arêde, António	Cantilever flexural strength tests of masonry infill walls strengthened with textile-reinforced mortar	101611
Dai, Mingkun / Lu, Xing / Xu, Peng	Causes of low delta-T syndrome for chilled water systems in buildings	101499
Al-Omari, Asaad / Khattab, Suhail	' Characterization of building materials used in the construction of historical Al-Omariya mosque minaret in Mosul's old city, Iraq	101645
Eberhardt, Leonora Charlotte Malabi / Rønholt, Julie / Birkved, Morten / Birgisdóttir, Harpa	Circular Economy potential within the building stock - Mapping the embodied greenhouse gas emissions of four Danish examples	101845
Faqih, Faisal / Zayed, Tarek	A comparative review of building component rating systems	101588
Chen, Jianheng / Lu, Lin	Comprehensive evaluation of thermal and energy performance of radiative roof cooling in buildings	101631
Carretero-Ayuso, Manuel J. / Sáez-Pérez, María Paz	Construction flaws in facing brick facades and the risk of associated litigation	101633
Aguirre-Guerrero, Ana María / Robayo-Salazar, Rafael Andres / Mejía de Gutiérrez, Ruby	Corrosion resistance of alkali-activated binary reinforced concrete based on natural volcanic pozzolan exposed to chlorides	101593
Kim, Jaehwan / McCarter, W. John / Suryanto, Benny	Cover-zone protective qualities under corrosive environments	101618
Rastegari, Mahsa / Pournaseri, Shahnaz / Sanaieian, Haniyeh	Daylight optimization through architectural aspects in an office building atrium in Tehran	101718
Ferreira, C. / Silva, A. / de Brito, J. / Dias, I. S. / Flores-Colen, I.	Definition of a condition-based model for natural stone claddings	101643
Wu, Yuxin / Mäki, Aleksi / Jokisalo, Juha / Kosonen, Risto / Kilpeläinen, Simo / Salo, Sonja / Liu, Hong / Li, Baizhan	Demand response of district heating using model predictive control to prevent the draught risk of cold window in an office building	101855
Vares, Maia-Liisa / Ruus, Aime / Nutt, Nele / Kubjas, Ardo / Raamets, Jane	Determination of paper plaster hygrothermal performance: Influence of different types of paper on sorption and moisture buffering	101830
Li, Qingqing / Zhang, Ye / Guo, Tieming / Fan, Jianhua	Development of a new method to estimate thermal performance of multilayer radiant floor	101562
Yıldırım, Gürkan / Kul, Anıl / Özçelikci, Emircan / Şahmaran, Mustafa / Aldemir, Alper / Figueira, Diogo / Ashour, Ashraf	Development of alkali-activated binders from recycled mixed masonry-originated waste	101690
Feizolahbeigi, Arezu / Lourenço, Paulo B. / Golabchi, Mahmoud / Ortega, Javier / Rezazadeh, Mojtaba	Discussion of the role of geometry, proportion and construction techniques in the seismic behavior of 16th to 18th century bulbous discontinuous double shell domes in central Iran	101575
Sohail, Muazzam Ghous / Kahraman, Ramazan / Al Nuaimi, Nasser / Gencturk, Bora / Alnahhal, Wael	Durability characteristics of high and ultra-high performance concretes	101669
Kim, Seungwon / Kim, Yongjae / Usman, Muhammad / Park, Cheolwoo / Hanif, Asad	Durability of slag waste incorporated steel fiber-reinforced concrete in marine environment	101641
Santos, Tânia / Faria, Paulina / Silva, António Santos	Eco-efficient earth plasters: The effect of sand grading and additions on fresh and mechanical properties	101591
Wulandari, Kiki Dwi / Ekaputri, Januarti Jaya / Kurniawan, Setyo Budi / Primaningtyas, Widya Emilia / Abdullah, Siti Rozaimah Sheikh / Ismail, Nur ‘Izzati / Imron, Muhammad Fauzul	Effect of microbes addition on the properties and surface morphology of fly ash-based geopolymer paste	101596
Sanyal, Prasenjit / Dalui, Sujit Kumar	Effects of internal angle between limbs of "Y" plan shaped tall building under wind load	101843
Khemet, Bomani / Richman, Russell	An empirical approach to improving preconstruction airtightness estimates in light framed, detached homes in Canada	101433
Deng, Yujing / Gou, Zhonghua / Gui, Xuechen / Cheng, Bin	Energy consumption characteristics and influential use behaviors in university dormitory buildings in China's hot summer-cold winter climate region	101870
Dissanayake, D. G. K. / Weerasinghe, D. U. / Thebuwanage, L. M. / Bandara, U. A. A. N.	An environmentally friendly sound insulation material from post-industrial textile waste and natural rubber	101606
Jamal Razeghi, Seyed Mohammad / Safarzadeh, Mohammad / Pasdarshahri, Hadi	Evaluation of air curtain and emergency exhaust system for smoke confinement of an enclosure	101650
Calisir, Tamer / Yazar, Hakan O. / Baskaya, Senol	Evaluation of flow field over panel radiators to investigate the effect of different convector geometries	101600
Habibi, Saeid / Pons, Oriol / Abt, Tobias	Evaluation of household waste materials for façade components in primary educational workshops. Degradation behavior and mechanical properties of aged samples	101573
Zhang, Jing / Wang, Jian / Gao, Jun / Xie, Mengxiao / Cao, Changsheng / Lv, Lipeng / Zeng, Lingjie	Experimental and numerical study of the effect of perimeter jet enhancement on the capture velocity of a rectangular exhaust hood	101652
Taheri, Bahram M. / Ramezanianpour, Amir M. / Sabokpa, Saeed / Gapele, Mohammad	Experimental evaluation of freeze-thaw durability of pervious concrete	101617
Hasim Kısa, M. / Yüksel, S. Bahadir / Çağlar, Naci	Experimental study on hysteric behavior of composite shear walls with steel sheets	101570
Yang, Yingxia / Wang, Zhichao / Li, Xiaofeng / Zhao, Dan / Ren, Yujie / Wang, Honglei / Xu, Zhaowei / Zuo, Jin / Yao, Kai / Sun, Guangzhao	Factors influencing the airflow rate of kitchens in cooking exhaust shaft system of high-rise residential buildings	101559
Zaccaron, Alexandre / de Souza Nandi, Vitor / Bernardin, Adriano Michael	Fast drying for the manufacturing of clay ceramics using natural clays	101877
Giese, Andressa Cristine Hamilko / Giese, Davi Nowicki / Dutra, Vanessa Fátima Pasa / da Silva Filho, Luiz Carlos Pinto	Flexural behavior of reinforced concrete beams strengthened with textile reinforced mortar	101873
Gombeda, Matthew J. / Naito, Clay J. / Quiel, Spencer E.	Flexural performance of precast concrete insulated wall panels with various configurations of ductile shear ties	101574
Shen, Xinyu / Chen, Weiwei / Li, Bo / Hancock, Craig Mathew / Xu, Yidong	Flexural strengthening of reinforced concrete beams using fabric reinforced Alkali-Activated Slag matrix	101865
Ávila-Delgado, Jorge / Robador, Maria Dolores / Barrera-Vera, José Antonio / Marrero, Madelyn	Glazing selection procedure for office building retrofitting in the Mediterranean climate in Spain	101448
Zheng, Wenke / Dong, Jiankai / Zhang, Long / Chen, Zhihua	Heating performance for a hybrid radiant-convective heating terminal by orthogonal test method	101627
Negri, S. / Aiello, M. A.	High-resolution GPR survey for masonry wall diagnostics	101817
El Loubani, Mohamad / Ghaddar, Nesreen / Ghali, Kamel / Itani, Mariam	Hybrid cooling system integrating PCM-desiccant dehumidification and personal evaporative cooling for hot and humid climates	101580
Ferreira, C. / Silva, A. / de Brito, J. / Dias, I. S. / Flores-Colen, I.	The impact of imperfect maintenance actions on the degradation of buildings’ envelope components	101571
Neya, Ibrahim / Yamegueu, Daniel / Coulibaly, Yézouma / Messan, Adamah / Ouedraogo, Arnaud Louis Sountong-Noma	Impact of insulation and wall thickness in compressed earth buildings in hot and dry tropical regions	101612
Mangan, Suzi Dilara / Koçlar Oral, Gül / Kocagil, Idil Erdemir / Sozen, Irem	The impact of urban form on building energy and cost efficiency in temperate-humid zones	101626
Benzannache, Naziha / Belaadi, Ahmed / Boumaaza, Massaouda / Bourchak, Mostefa	Improving the mechanical performance of biocomposite plaster/ Washingtonian filifira fibres using the RSM method	101840
Sabapathy, Karthik A. / Gedupudi, Sateesh	In situ thermal characterization of rice straw envelope of an outdoor test room	101416
Ganesh, Hari S. / Seo, Kyeongjun / Fritz, Hagen E. / Edgar, Thomas F. / Novoselac, Atila / Baldea, Michael	Indoor air quality and energy management in buildings using combined moving horizon estimation and model predictive control	101552
Barham, Wasim S. / Albiss, Borhan / Lataifeh, Omar	Influence of magnetic field treated water on the compressive strength and bond strength of concrete containing silica fume	101544
Vo, Duy-Hai / Hwang, Chao-Lung / Yehualaw, Mitiku Damtie / Liao, Min-Chih	The influence of MgO addition on the performance of alkali-activated materials with slag−rice husk ash blending	101605
Trindade, André D. / Coelho, Guilherme B. A. / Henriques, Fernando M. A.	Influence of the climatic conditions on the hygrothermal performance of autoclaved aerated concrete masonry walls	101578
Yoo, Doo-Yeol / You, Ilhwan	Liquid crystal display glass powder as a filler for enhancing steel fiber pullout resistance in ultra-high-performance concrete	101846
Sun, Han / Burton, Henry V. / Huang, Honglan	Machine learning applications for building structural design and performance assessment: State-of-the-art review	101816
Rasoul Abdar Esfahani, Seyed Mohammad / Zareei, Seyed Alireza / Madhkhan, Morteza / Ameri, Farshad / Rashidiani, Jamal / Taheri, Ramezan Ali	Mechanical and gamma-ray shielding properties and environmental benefits of concrete incorporating GGBFS and copper slag	101615
Park, Jun Kil / Kim, Dong joo / Kim, Min Ook	Mechanical behavior of waste fishing net fiber-reinforced cementitious composites subjected to direct tension	101622
Ahmad, Afnan / Adil, Mohammad / Khalil, Ahmad / Rahman, Mujeebur	Mechanical properties and durability of boardcrete blocks prepared from recycled cardboard	101644
Xu, Fan / Wang, Sheliang / Li, Tao / Liu, Bo / Li, Binbin / Zhou, Yuan	Mechanical properties and pore structure of recycled aggregate concrete made with iron ore tailings and polypropylene fibers	101572
Carrillo, Julian / Lozano, Harold / Arteta, Carlos	Mechanical properties of steel reinforcing bars for concrete structures in central Colombia	101858
Jafari, Mohammad / Alipour, Alice	Methodologies to mitigate wind-induced vibration of tall buildings: A state-of-the-art review	101582
Li, Xiuming / Han, Zongwei / Zhao, Tianyi / Zhang, Jili / Xue, Da	Modeling for indoor temperature prediction based on time-delay and Elman neural network in air conditioning system	101854
May Tzuc, O. / Rodríguez Gamboa, O. / Aguilar Rosel, R. / Che Poot, M. / Edelman, H. / Jiménez Torres, M. / Bassam, A.	Modeling of hygrothermal behavior for green facade's concrete wall exposed to nordic climate using artificial intelligence and global sensitivity analysis	101625
Huang, Qian / Zhu, Xiaohong / Liu, Dongsheng / Zhao, Liang / Zhao, Min	Modification of water absorption and pore structure of high-volume fly ash cement pastes by incorporating nanosilica	101638
Wang, Xiuwang / Mao, Xinna / Khodaei, Hossein	A multi-objective home energy management system based on internet of things and optimization algorithms	101603
Ding, Xinlei / Guo, Yabin / Liu, Tao / Liu, Qian / Chen, Huanxin	New fault diagnostic strategies for refrigerant charge fault in a VRF system using hybrid machine learning method	101577
Pérez-Valcárcel, J. / Muñoz-Vidal, M. / Suárez-Riestra, F. / López-César, Isaac R. / Freire-Tellado, M. J.	A new system of deployable structures with reciprocal linkages for emergency buildings	101609
Minaei, Asgar / Safikhani, Hamed	A new transient analytical model for heat transfer of earth-to-air heat exchangers	101560
Saha, Ashish Kumer / Majhi, Subhra / Sarker, Prabir Kumar / Mukherjee, Abhijit / Siddika, Ayesha / Aslani, Farhad / Zhuge, Yan	Non-destructive prediction of strength of concrete made by lightweight recycled aggregates and nickel slag	101614
Ulusoy, Serdar / Nigdeli, Sinan Melih / Bekdaş, Gebrail	Novel metaheuristic-based tuning of PID controllers for seismic structures and verification of robustness	101647
Gundlach, Joel / Bryla, Michael / Larsen, Tove A. / Kristoferitsch, Lotte / Gründl, Harald / Holzner, Markus	Novel NoMix toilet concept for efficient separation of urine and feces and its design optimization using computational fluid mechanics	101500
Qian, Kai / Weng, Yun-Hao / Fu, Feng / Deng, Xiao-Fang	Numerical evaluation of the reliability of using single-story substructures to study progressive collapse behaviour of multi-story RC frames	101636
Taheri, Morteza / Zolfaghari, Seyed Alireza / Hassanzadeh, Hassan / Salmanzadeh, Mazyar	Numerical investigation of the effects of fan-coil airflow direction on distribution and deposition of indoor pollutant particles	101547
Jin, Dengyiding / Hou, Chao / Shen, Luming / Han, Lin-Hai	Numerical performance of blind-bolted demountable square CFST K-joints	101646
Feng, Wanhui / Chen, Baiyu / Yang, Fei / Liu, Feng / Li, Lijuan / Jing, Lin / Li, Hongzhong	Numerical study on blast responses of rubberized concrete slabs using the Karagozian and Case concrete model	101610
Malla, Prafulla / Xiong, Feng / Cai, Gaochuang / Xu, Yong / Si Larbi, Amir / Chen, Wen	Numerical study on the behaviour of vertical bolted joints for precast concrete wall-based low-rise buildings	101529
Molari, Luisa / García, José J.	On the radial variation of the transverse mechanical properties of bamboo	101557
Tsigarida, Alexia / Tsampali, Evangelia / Konstantinidis, Avraam A. / Stefanidou, Maria	On the use of confocal microscopy for calculating the surface microroughness and the respective hydrophobic properties of marble specimens	101876
Geng, Yichao / Han, Xu / Zhang, Hua / Shi, Luyang	Optimization and cost analysis of thickness of vacuum insulation panel for structural insulating panel buildings in cold climates	101853
Bouasria, Manal / Khadraoui, Fouzia / Benzaama, Mohammed-Hichem / Touati, Karim / Chateigner, Daniel / Gascoin, Stéphanie / Pralong, Valérie / Orberger, Beate / Babouri, Laidi / El Mendili, Yassine	Partial substitution of cement by the association of Ferronickel slags and Crepidula fornicata shells	101587
Villar-Salinas, Sergio / Guzmán, Andrés / Carrillo, Julian	Performance evaluation of structures with reinforced concrete columns retrofitted with steel jacketing	101510
Rostami, Reza / Alaghmandan, Matin	Performance-based design in emergency evacuation: From maneuver to simulation in school design	101598
Djon Li Ndjock, B. I. / Robayo-Salazar, R. A. / Mejía de Gutierrez, R. / Baenla, J. / Mbey, J. A. / Cyr, Martin / Elimbi, A.	Phosphoric acid activation of volcanic ashes: Influence of the molar ratio R = (MgO + CaO) / P2O5 on reactivity of volcanic ash and strength of obtained cementitious material	101879
Al-Sabah, Salam / Alam Sourav, Shah Nur / McNally, Ciaran	The post-installed screw pull-out test: Development of a method for assessing in-situ concrete compressive strength	101658
Vummadisetti, Sudhir / Singh, S. B.	Postbuckling response of functionally graded hybrid plates with cutouts under in-plane shear load	101530
Ho, W. T. / Yu, F. W.	Predicting chiller system performance using ARIMA-regression models	101871
Paiho, Satu / Saastamoinen, Heidi / Karjalainen, Sami	Promoting energy services in offices: How do office workers see their role?	101602
Bursill, Jayson / O'Brien, William / Beausoleil-Morrison, Ian	Proxy zone-level energy use estimation in a commercial building with a variable air volume system	101498
Kalthoff, Matthias / Raupach, Michael	Pull-out behaviour of threaded anchors in fibre reinforced ordinary concrete and UHPC for machine tool constructions	101842
Tahmoorian, F. / Nemati, S. / Sharafi, P. / Samali, B. / Khakpour, S.	Punching behaviour of foam filled modular sandwich panels with high-density polyethylene skins	101634
Salikandi, Mohammad / Ranjbar, Benyamin / Shirkhan, Elahe / Priya, S. Shanmuga / Thirunavukkarasu, I. / Sudhakar, K.	Recent trends in liquid desiccant materials and cooling systems: Application, performance and regeneration characteristics	101579
Garrido, M. / António, D. / Lopes, J. G. / Correia, J. R.	Reparability of aged PVC waterproofing membranes: Effect of joining method	101569
Liu, Xiaodong / Yang, Li / Niu, Shengnan	Research on the effect of different position on classroom ventilation in a "L" type teaching building	101852
Mariano-Hernández, D. / Hernández-Callejo, L. / Zorita-Lamadrid, A. / Duque-Pérez, O. / Santos García, F.	A review of strategies for building energy management system: Model predictive control, demand side management, optimization, and fault detect & diagnosis	101692
Ali, Ahmed Khairadeen / Lee, One Jae / Song, Hayub	Robot-based facade spatial assembly optimization	101556
Arashpour, Mehrdad / Ngo, Tuan / Li, Heng	Scene understanding in construction and buildings using image processing methods: A comprehensive review and a case study	101672
Mohebi, Benyamin / Yazdanpanah, Omid / Kazemi, Farzin / Formisano, Antonio	Seismic damage diagnosis in adjacent steel and RC MRFs considering pounding effects through improved wavelet-based damage-sensitive feature	101847
Mohsenian, Vahid / Filizadeh, Reza / Hajirasouliha, Iman / Garcia, Reyes	Seismic performance assessment of eccentrically braced steel frames with energy-absorbing links under sequential earthquakes	101576
Castaldo, P. / Tubaldi, E. / Selvi, F. / Gioiella, L.	Seismic performance of an existing RC structure retrofitted with buckling restrained braces	101688
Mohammed, Ahmed / Rafiq, Serwan / Sihag, Parveen / Kurda, Rawaz / Mahmood, Wael	Soft computing techniques: Systematic multiscale models to predict the compressive strength of HVFA concrete based on mix proportions and curing times	101851
Alaedini, Shohreh / Kabir, Mohammad Zaman / Al-Mahaidi, Riadh	Stability performance of thin-walled pultruded beams with geometric web-flange junction imperfections	101549
Ye, Zhihang / Giriunas, Kevin / Sezen, Halil / Wu, Gang / Feng, De-Cheng	State-of-the-art review and investigation of structural stability in multi-story modular buildings	101844
Luo, Qirui / Wang, Wei / Sun, Zhuangzhuang / Wang, Bingjie / Xu, Shanwen	Statistical analysis of mesoscopic concrete with random elastic modulus	101850
Al Waheed Hawila, Abed / Merabtine, Abdelatif	A statistical-based optimization method to integrate thermal comfort in the design of low energy consumption building	101661
Moayedian, Sayed Mohammad / Hejazi, Mehrdad	Stress-strain relationships for scaled gypsum mortar and cement mortar brick masonry	101861
Saheed, Sanusi / Amran, Y. H. Mugahed / El-Zeadani, Mohamed / Nora A. Aziz, Farah / Fediuk, Roman / Alyousef, Rayed / Alabduljabbar, Hisham	Structural behavior of out-of-plane loaded precast lightweight EPS-foam concrete C-shaped slabs	101597
Casagrande, Daniele / Sinito, Ester / Izzi, Matteo / Pasetto, Gaia / Polastri, Andrea	Structural performance of a hybrid timber wall system for emergency housing facilities	101566
Iskhakov, I. / Ribakov, Y.	Structural phenomenon based theoretical model of concrete tensile behavior at different stress-strain conditions	101594
Meng, Xinwei / Han, Zongwei / Hu, Honghao / Zhang, Hongzhi / Li, Xiuming	Studies on the performance of ground source heat pump affected by soil freezing under groundwater seepage	101632
Gorji Azandariani, Mojtaba / Gholhaki, Majid / Kafi, Mohammad Ali / Zirakian, Tadeh	Study of effects of beam-column connection and column rigidity on the performance of SPSW system	101821
Łukasz, Drobiec	Study of impact of bed joint reinforcement on load-carrying capacity and crack resistance of masonry walls made of calcium silicate units	101841
Akbar, Arslan / Farooq, Furqan / Shafique, Muhammad / Aslam, Fahid / Alyousef, Rayed / Alabduljabbar, Hisham	Sugarcane bagasse ash-based engineered geopolymer mortar incorporating propylene fibers	101492
Arooj, Muhammad Farhan / Haseeb, Fahad / Butt, Akbar Imran / Irfan-ul-Hassan, Muhammad / Batool, Hania / Kibriya, Saad / Javed, Zara / Nawaz, Hassan / Asif, Sarah	A sustainable approach to reuse of treated domestic wastewater in construction incorporating admixtures	101616
Li, Leo Gu / Zheng, Jun Ying / Ng, Pui-Lam / Hung Kwan, Albert Kwok	Synergistic cementing efficiencies of nano-silica and micro-silica in carbonation resistance and sorptivity of concrete	101862
Zidi, Zeineb / Ltifi, Mounir / Zafar, Idrees	Synthesis and attributes of Nano-SiO2 local metakaolin based-geopolymer	101586
de Azevedo, Afonso R. G. / Teixeira Marvila, Markssuel / Tayeh, Bassam A. / Cecchin, Daiane / Pereira, Artur Camposo / Monteiro, Sergio Neves	Technological performance of açaí natural fibre reinforced cement-based mortars	101675
Cardemil, J. M. / Schneider, W. / Behzad, M. / Starke, A. R.	Thermal analysis of a water source heat pump for space heating using an outdoor pool as a heat source	101581
Soret, G. M. / Vacca, P. / Tignard, J. / Hidalgo, J. P. / Maluk, C. / Aitchison, M. / Torero, J. L.	Thermal inertia as an integrative parameter for building performance	101623
Adekunle, Timothy O.	Thermal performance and apparent temperature in school buildings: a case of cross-laminated timber (CLT) school development	101731
Awad, Hadia / Secchi, Lana / Gül, Mustafa / Ge, Hua / Knudson, Robert / Al-Hussein, Mohamed	Thermal resistance of multi-functional panels in cold-climate regions	101838
Elert, Kerstin / García Baños, Eva / Ibañez Velasco, Aurelia / Bel-Anzué, Pedro	Traditional roofing with sandstone slabs: Implications for the safeguarding of vernacular architecture	101857
Lin, Yu-Hsiu	Trainingless multi-objective evolutionary computing-based nonintrusive load monitoring: Part of smart-home energy management for demand-side management	101601
Rizi, Rana Abdollahi / Eltaweel, Ahmad	A user detective adaptive facade towards improving visual and thermal comfort	101554
Wu, Jie / Hu, Ningtao / Dong, You / Zhang, Qilin / Yang, Bin	Wind characteristics atop Shanghai Tower during typhoon Jongdari using field monitoring data	101815

Informations
sur cette fiche
IssueID
37253
Publié(e) le:
22.06.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Journal of Building Engineering - janvier 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Journal of Building Engineering - janvier 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.