IOP Conference Series: Materials Science and Engineering - juin 2020

Publié:	juin 2020

Auteur(s)	Titre	Page(s)
Nair, Avinash / Aditya, S. D. / Adarsh, R. N. / Nandan, M. / Dharek, Manish S. / Sreedhara, B. M. / Prashant, Sunagar C. / Sreekeshava, K. S.	Additive Manufacturing of Concrete: Challenges and opportunities	012022
Mohite, D. D. / Salimath, S. S.	Anaerobic Biological Treatment of Distillery Wastewater – Study on Continuous Stirred Tank Reactor	012030
Rudrapati, R. / Bandyopadhyay, A. / Pal, P. K. / Rathod, L.	Analysis, modeling and optimization of surface roughness in cylindrical traverse cut grinding using factorial design, RSM and simulated annealing algorithm	012016
Muthekar, Vijay V. / Sasane, Pratik S. / Phalak, Rupam R. / Gour, Shivani S. / Kharat, Avinash G.	Application of Light Interference Technique for Locating Groundwater Veins	012027
Sunagar, Prashant / Bhashyam, Aravind / Dharek, Manish S. / Sreekeshava, K. S. / Ramegowda, R. S. / Lakshmi, H. S.	Blast resistance of steel plate shear walls designed for seismic loading	012041
Lal, Achchhe / Parghi, Anant / Mahto, Anil Kumar / Kumar, Rahul	Buckling analysis of laminated composite plate due to localised in plane loading	012026
Desai, Janhavi / Sreekeshava, K. S. / Dharek, Manish S. / Sunagar, Prashanth / Ganesh, C. R.	Carbon Dioxide Sequestration by Mineral Carbonation Using Alkaline Rich Material	012035
Nayal, Sanchayata / Lamb, Sampada / Sahoo, Devabrata / Raghavendra, N. V. / Bellary, S. A. I.	Computational analysis of novel cavity-based flameholder designs for supersonic combustion engines	012018
Majumder, Biswajit / Katarkar, Anil / Bhaumik, Swapan	Effect of structured surface on contact angle using Sessile Droplet method	012034
Pawar, Prashant B. / Rakate, Ganesh N. / Yadav, Sujit V. / Gondkar, Vivek S. / Chittewar, Suresh L. / Daingade, Prashant S.	Effect on bubble dynamics during pool boiling heat transfer in a novel aqueous binary mixture of surfactants	012045
Kawade, U. R. / Daule, S. N.	Enhancement of Properties of Geopolymer concrete with Crimped Steel Fibers	012008
Umravia, N. B. / Solanki, C. H.	Experimental and Numerical study Behaviors on Single Cement Flyash Gravel pile under the combined effect of axial compression and Lateral load	012002
Wagh, Santoshkumar V. / Bhatt, Dhananjay V. / Menghani, Jyoti V. / Pardeshi, Sujit S. / Deshmukh, Bhagyesh B.	Experimental investigation and effects of laser hardening process parameters on microhardness of En24 steel	012003
Korabu, I. / Pise, C.	Experimental study of partial replacement of cement by waste marble powder in a concrete prepared with artificial sand	012046
Lal, Achchhe / Jain, Khushbu / Palekar, S. P.	Fracture analysis of center cracked laminated composite plate subjected to bi-axial loading using extended finite element method	012020
Lal, Achchhe / Sutaria, B. M. / Mishra, Kundan	Fracture analysis of single edge cracked functionally graded material plate under various loading conditions by extended finite element method	012014
Samantaraya, Debabrata / Lakade, Sanjay	Hard Turning Cutting Tool Materials used in Automotive and Bearing Manufacturing Applications – A review	012005
Kaur, Mavjot / Murari, Krishna / Singh, Gurpuneet	Influence of Multi-walled carbon nanotubes on mechanical properties of cement concrete	012001
Gaikwad, B. D. / Khomane, S. M. / Wangikar, S. S. / Jadhav, C. C. / Jagtap, T. A.	Investigation of Hot Piercing method for manufacturing of conveyor chain link of bagasse carrier of the sugar industry to enhance the breaking load	012004
Shrivastava, Pooja / Verma, M. K. / Murmu, Meena / Ahmad, Ishtiyaq	Life cycle assessment modelling for a developing city‘s water system	012029
Rathod, L. / Poonawala, NS / Rudrapati, R.	Multi response optimization in WEDM of H13 steel using hybrid optimization approach	012015
Kulkarni, Pratik / Kulkarni, Swanand	Naturally Available Materials and Manufacturing Processes for Development of Biodegradable Composite	012006
Lal, Achchhe / Kanu, Nand Jee	The nonlinear deflection response of CNT/nanoclay reinforced polymer hybrid composite plate under different loading conditions	012033
Kanu, Nand Jee / Patwardhan, Devendra / Gupta, Eva / Vates, Umesh Kumar / Singh, Gyanendra Kumar	Numerical investigations of stress-deformation responses in fractured paediatric bones with prosthetic bone plates	012038
Lal, Achchhe / Vaghela, Manoj B. / Mishra, Kundan	Numerical study of edge crack interaction with inclusion and void of an isotropic plate under different loadings by extended finite element method	012017
Shastri, Nipa M. / Raval, Adhish V. / Joshi, V. G.	Optical and Gas sensing properties of BaxSr1-xTiO3 (with x=0.5 and x=0.7) thin films grown using Pulse Laser Deposition	012036
Thakkar, Kanan / Parghi, Anant	Performance Evaluation of Bridge Piers Reinforced with Shape Memory Alloys in Plastic Hinge Region: Part 1 – Statistical Analysis	012013
Thakkar, Kanan / Parghi, Anant	Performance Evaluation of Bridge Piers Reinforced with Shape Memory Alloys in Plastic Hinge Region: Part 2 – Optimization	012021
Kadam, Shriganesh S. / Karjinni, Vilas V.	Prediction of mechanical properties of high strength steel fiber reinforced concrete with multiple regression technique	012043
Khiste, S. G. / Kulkarni, P. / Katekar, S. D.	Probabilistic design of composite leaf spring by using finite element method	012019
Patel, Mayank / Pardeshi, Rahul / Thakur, Bhairav / Parghi, Anant	Review of Strengthened FRP-confined RC column with various aspect ratios under axial load and high-temperature	012025
Katarkar, Anil / Majumder, Biswajit / Bhaumik, Swapan	Review on Passive Heat Enhancement Techniques in Pool Boiling Heat Transfer	012031
Thakur, Bhairav / Pardeshi, Rahul / Patel, Mayank / Parghi, Anant	Seismic Assessment of Concrete Column Reinforced with Fiber Reinforced Polymer and Stainless Steel Rebars	012024
Pardeshi, Rahul / Thakur, Bhairav / Parghi, Anant	Seismic investigation of longitudinally aligned shape memory alloy-stainless steel reinforced concrete column	012012
Thakkar, Kanan / Parghi, Anant	Seismic Performance of Bridge Piers Reinforced with Shape Memory Alloys in Plastic Hinge Region	012007
Rao, Kumar R. / Sreekeshava, K. S. / Dharek, Manish S. / Sunagar, Prashant C. / Ganesh, C. R.	Spatial variation of climate change issues using remote sensing technique	012042
Vinod, B. R. / Shobha, R. / Raghavendra, A. B. / Rakesh, M. / Pallavi, S.	Stabilization on Expansive soil using sea shell powder and Rubber powder	012028
Lal, Achchhe / Markad, Kanif	Static buckling analysis of shape memory alloy reinforced composite laminated plate	012009
Lal, Achchhe / Sutaria, B. M. / Kumar, Rahul	Stress analysis of composite plate with cutout of various shape	012011
Dharek, Manish S. / Raghunath, S. / Sunagar, Prashant C. / Bhashyam, Aravind H. / Sreekeshava, K. S.	Stress strain characteristics of reinforced hollow concrete block masonry melded with mesh reinforcement	012040
Gawade, Meghna K. / Jatti, Vijaykumar S. / Phule, Vaibhav V. / Sawant, Pranita V.	Study on Effect of Abrasive Water Jet Machining Process Parameter on Taper Angle during Machining of Epoxy Resin Glass Fibre	012039
Mujmule, N. S. / Katekar, S. D. / Gaikwad, A. P. / Mali, S. C. / Koli, S. R.	A Systematic Ergonomics Approach of Maintenance Workstation	012032
Kaur, Mavjot / Murari, Krishna / Kaur, Inderpreet	Techniques and various efficiency evaluation tests for self-healing cement-based matrix: State-of-the-art	012023
Hunachal, Santoshkumar M. / Chodankar, Bhagyraj / Salgonkar, Rahul / Nakhwa, Durvesh	Theoretical Analysis of LC Filter to Three Level Diode Clamped Inverters in Low/Medium Voltage Applications	012037
Jadhav, S. V. / Pawar, P. M. / Wangikar, S. S. / Bhostekar, N. N. / Pawar, S. T.	Thermal Management Materials for Advanced Heat Sinks used in Modern Microelectronics	012044
Prem Kumar, J. / Rajeev, V. R. / KrishnaKumar, K. / Hashim, M.	Tribological characteristics of as-cast A356/10wt.% SiCp functionally graded composite dry sliding against EN-31 steel under unidirectional and oscillatory modes	012010

Auteur(s)

Titre

Page(s)

Nair, Avinash / Aditya, S. D. / Adarsh, R. N. / Nandan, M. / Dharek, Manish S. / Sreedhara, B. M. / Prashant, Sunagar C. / Sreekeshava, K. S.

Additive Manufacturing of Concrete: Challenges and opportunities

012022

Mohite, D. D. / Salimath, S. S.

Anaerobic Biological Treatment of Distillery Wastewater – Study on Continuous Stirred Tank Reactor

012030

Rudrapati, R. / Bandyopadhyay, A. / Pal, P. K. / Rathod, L.

Analysis, modeling and optimization of surface roughness in cylindrical traverse cut grinding using factorial design, RSM and simulated annealing algorithm

012016

Muthekar, Vijay V. / Sasane, Pratik S. / Phalak, Rupam R. / Gour, Shivani S. / Kharat, Avinash G.

Application of Light Interference Technique for Locating Groundwater Veins

012027

Sunagar, Prashant / Bhashyam, Aravind / Dharek, Manish S. / Sreekeshava, K. S. / Ramegowda, R. S. / Lakshmi, H. S.

Blast resistance of steel plate shear walls designed for seismic loading

012041

Lal, Achchhe / Parghi, Anant / Mahto, Anil Kumar / Kumar, Rahul

Buckling analysis of laminated composite plate due to localised in plane loading

012026

Desai, Janhavi / Sreekeshava, K. S. / Dharek, Manish S. / Sunagar, Prashanth / Ganesh, C. R.

Carbon Dioxide Sequestration by Mineral Carbonation Using Alkaline Rich Material

012035

Nayal, Sanchayata / Lamb, Sampada / Sahoo, Devabrata / Raghavendra, N. V. / Bellary, S. A. I.

Computational analysis of novel cavity-based flameholder designs for supersonic combustion engines

012018

Majumder, Biswajit / Katarkar, Anil / Bhaumik, Swapan

Effect of structured surface on contact angle using Sessile Droplet method

012034

Pawar, Prashant B. / Rakate, Ganesh N. / Yadav, Sujit V. / Gondkar, Vivek S. / Chittewar, Suresh L. / Daingade, Prashant S.

Effect on bubble dynamics during pool boiling heat transfer in a novel aqueous binary mixture of surfactants

012045

Kawade, U. R. / Daule, S. N.

Enhancement of Properties of Geopolymer concrete with Crimped Steel Fibers

012008

Umravia, N. B. / Solanki, C. H.

Experimental and Numerical study Behaviors on Single Cement Flyash Gravel pile under the combined effect of axial compression and Lateral load

012002

Wagh, Santoshkumar V. / Bhatt, Dhananjay V. / Menghani, Jyoti V. / Pardeshi, Sujit S. / Deshmukh, Bhagyesh B.

Experimental investigation and effects of laser hardening process parameters on microhardness of En24 steel

012003

Korabu, I. / Pise, C.

Experimental study of partial replacement of cement by waste marble powder in a concrete prepared with artificial sand

012046

Lal, Achchhe / Jain, Khushbu / Palekar, S. P.

Fracture analysis of center cracked laminated composite plate subjected to bi-axial loading using extended finite element method

012020

Lal, Achchhe / Sutaria, B. M. / Mishra, Kundan

Fracture analysis of single edge cracked functionally graded material plate under various loading conditions by extended finite element method

012014

Samantaraya, Debabrata / Lakade, Sanjay

Hard Turning Cutting Tool Materials used in Automotive and Bearing Manufacturing Applications – A review

012005

Kaur, Mavjot / Murari, Krishna / Singh, Gurpuneet

Influence of Multi-walled carbon nanotubes on mechanical properties of cement concrete

012001

Gaikwad, B. D. / Khomane, S. M. / Wangikar, S. S. / Jadhav, C. C. / Jagtap, T. A.

Investigation of Hot Piercing method for manufacturing of conveyor chain link of bagasse carrier of the sugar industry to enhance the breaking load

012004

Shrivastava, Pooja / Verma, M. K. / Murmu, Meena / Ahmad, Ishtiyaq

Life cycle assessment modelling for a developing city‘s water system

012029

Rathod, L. / Poonawala, NS / Rudrapati, R.

Multi response optimization in WEDM of H13 steel using hybrid optimization approach

012015

Kulkarni, Pratik / Kulkarni, Swanand

Naturally Available Materials and Manufacturing Processes for Development of Biodegradable Composite

012006

Lal, Achchhe / Kanu, Nand Jee

The nonlinear deflection response of CNT/nanoclay reinforced polymer hybrid composite plate under different loading conditions

012033

Kanu, Nand Jee / Patwardhan, Devendra / Gupta, Eva / Vates, Umesh Kumar / Singh, Gyanendra Kumar

Numerical investigations of stress-deformation responses in fractured paediatric bones with prosthetic bone plates

012038

Lal, Achchhe / Vaghela, Manoj B. / Mishra, Kundan

Numerical study of edge crack interaction with inclusion and void of an isotropic plate under different loadings by extended finite element method

012017

Shastri, Nipa M. / Raval, Adhish V. / Joshi, V. G.

Optical and Gas sensing properties of BaxSr1-xTiO3 (with x=0.5 and x=0.7) thin films grown using Pulse Laser Deposition

012036

Thakkar, Kanan / Parghi, Anant

Performance Evaluation of Bridge Piers Reinforced with Shape Memory Alloys in Plastic Hinge Region: Part 1 – Statistical Analysis

012013

Thakkar, Kanan / Parghi, Anant

Performance Evaluation of Bridge Piers Reinforced with Shape Memory Alloys in Plastic Hinge Region: Part 2 – Optimization

012021

Kadam, Shriganesh S. / Karjinni, Vilas V.

Prediction of mechanical properties of high strength steel fiber reinforced concrete with multiple regression technique

012043

Khiste, S. G. / Kulkarni, P. / Katekar, S. D.

Probabilistic design of composite leaf spring by using finite element method

012019

Patel, Mayank / Pardeshi, Rahul / Thakur, Bhairav / Parghi, Anant

Review of Strengthened FRP-confined RC column with various aspect ratios under axial load and high-temperature

012025

Katarkar, Anil / Majumder, Biswajit / Bhaumik, Swapan

Review on Passive Heat Enhancement Techniques in Pool Boiling Heat Transfer

012031

Thakur, Bhairav / Pardeshi, Rahul / Patel, Mayank / Parghi, Anant

Seismic Assessment of Concrete Column Reinforced with Fiber Reinforced Polymer and Stainless Steel Rebars

012024

Pardeshi, Rahul / Thakur, Bhairav / Parghi, Anant

Seismic investigation of longitudinally aligned shape memory alloy-stainless steel reinforced concrete column

012012

Thakkar, Kanan / Parghi, Anant

Seismic Performance of Bridge Piers Reinforced with Shape Memory Alloys in Plastic Hinge Region

012007

Rao, Kumar R. / Sreekeshava, K. S. / Dharek, Manish S. / Sunagar, Prashant C. / Ganesh, C. R.

Spatial variation of climate change issues using remote sensing technique

012042

Vinod, B. R. / Shobha, R. / Raghavendra, A. B. / Rakesh, M. / Pallavi, S.

Stabilization on Expansive soil using sea shell powder and Rubber powder

012028

Lal, Achchhe / Markad, Kanif

Static buckling analysis of shape memory alloy reinforced composite laminated plate

012009

Lal, Achchhe / Sutaria, B. M. / Kumar, Rahul

Stress analysis of composite plate with cutout of various shape

012011

Dharek, Manish S. / Raghunath, S. / Sunagar, Prashant C. / Bhashyam, Aravind H. / Sreekeshava, K. S.

Stress strain characteristics of reinforced hollow concrete block masonry melded with mesh reinforcement

012040

Gawade, Meghna K. / Jatti, Vijaykumar S. / Phule, Vaibhav V. / Sawant, Pranita V.

Study on Effect of Abrasive Water Jet Machining Process Parameter on Taper Angle during Machining of Epoxy Resin Glass Fibre

012039

Mujmule, N. S. / Katekar, S. D. / Gaikwad, A. P. / Mali, S. C. / Koli, S. R.

A Systematic Ergonomics Approach of Maintenance Workstation

012032

Kaur, Mavjot / Murari, Krishna / Kaur, Inderpreet

Techniques and various efficiency evaluation tests for self-healing cement-based matrix: State-of-the-art

012023

Hunachal, Santoshkumar M. / Chodankar, Bhagyraj / Salgonkar, Rahul / Nakhwa, Durvesh

Theoretical Analysis of LC Filter to Three Level Diode Clamped Inverters in Low/Medium Voltage Applications

012037

Jadhav, S. V. / Pawar, P. M. / Wangikar, S. S. / Bhostekar, N. N. / Pawar, S. T.

Thermal Management Materials for Advanced Heat Sinks used in Modern Microelectronics

012044

Prem Kumar, J. / Rajeev, V. R. / KrishnaKumar, K. / Hashim, M.

Tribological characteristics of as-cast A356/10wt.% SiCp functionally graded composite dry sliding against EN-31 steel under unidirectional and oscillatory modes

012010

Publicité

IOP Conference Series: Materials Science and Engineering - juin 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

IOP Conference Series: Materials Science and Engineering - juin 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.