Engineering Structures - février 2021

Publié:	février 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Muñoz Blanc, Carlos / Obiol Sánchez, Agustín / Fortea Navarro, Inma	Analytical characterisation of axial shortening due to creep of reinforced concrete columns in tall buildings	111584
Xu, Wenliu / Wang, Licheng	Analytical models for reverse arch and compressive arch action in horizontally restrained unbonded prestressed RC beam-column sub-assemblages	111529
Arul, Monica / Kareem, Ahsan	Applications of shapelet transform to time series classification of earthquake, wind and wave data	111564
Fitzgerald, Dillon / Sinha, Arijit / Miller, Thomas H. / Nairn, John A.	Axial slip-friction connections for cross-laminated timber	111478
Gonçalves, Matheus Silva / Carraro, Felipe / Lopez, Rafael Holdorf	A B-WIM algorithm considering the modeling of the bridge dynamic response	111533
Kang, Chongjie / Wenner, Marc / Marx, Steffen	Background investigation on the permissible additional rail stresses due to track/bridge interaction	111505
Mazza, Fabio	Base-isolation of a hospital pavilion against in-plane-out-of-plane seismic collapse of masonry infills	111504
Zhang, Yan / Chouinard, Luc E. / Conciatori, David / Power, Gabriel J.	Bayesian procedures for updating deterioration space-time models for optimizing the utility of concrete structures	111522
Mou, Ben / Zhou, Wanqiu / Qiao, Qiyun / Feng, Peng / Wu, Chenglong	Column base joint made with ultrahigh-strength steel bars and steel tubular: An experimental study	111483
Choi, Insub / Kim, JunHee / Jang, Jisang / Chang, Hakjong / Kang, Gisung	Composite effects on rotational constraints of a double-beam system reinforced with beam-end concrete	111585
Parastesh, Hossein / Mojtabaei, Seyed Mohammad / Taji, Hamed / Hajirasouliha, Iman / Bagheri Sabbagh, Alireza	Constrained optimization of anti-symmetric cold-formed steel beam-column sections	111452
Boem, Ingrid / Gattesco, Natalino	Cyclic behavior of masonry barrel vaults strengthened through Composite Reinforced Mortar, considering the role of the connection with the abutments	111518
Zhan, Jiawang / Zhang, Fei / Siahkouhi, Mohammad / Kong, Xuan / Xia, He	A damage identification method for connections of adjacent box-beam bridges using vehicle–bridge interaction analysis and model updating	111551
Jiang, Shao-Fei / Wang, Juan / Tong, Si-Yi / Ma, Sheng-Lan / Tuo, Ming-Bei / Li, Wei-Jie	Damage monitoring of concrete laminated interface using piezoelectric-based smart aggregate	111489
Thusoo, Shreya / Obara, Taku / Kono, Susumu / Miyahara, Kiyoshi	Design models for steel encased high-strength precast concrete piles under axial-flexural loads	111465
Chen, Junbo / Fang, Han / Chan, Tak-Ming	Design of fixed-ended octagonal shaped steel hollow sections in compression	111520
Shi, Fei / Zhou, Yun / Ozbulut, Osman E. / Cao, Sasa	Development and experimental validation of anchorage systems for shape memory alloy cables	111611
Tabatabaeian, Ali / Lotfi, Mehdi / Ghasemi, Ahmad Reza / Roohollahi, Sahba	Development of a new analytical framework for deflection analysis of un-symmetric hybrid FRP laminates with arbitrary ply arrangement and MWCNT reinforcement	111490
Wang, Wenxi / Yang, Zhilin / Hua, Xugang / Chen, Zhengqing / Wang, Xiuyong / Song, Gangbing	Evaluation of a pendulum pounding tuned mass damper for seismic control of structures	111554
Regueira, Rubén / Martínez-Martínez, Juan Enrique / Alonso-Martínez, Mar / Álvarez Rabanal, Felipe Pedro / Guaita, Manuel / del Coz Díaz, Juan José	Experimental and numerical analyses of rounded dovetail timber connections (RDC) under fire conditions	111535
Oliveira, Rafael G. / Rodrigues, João Paulo C. / Miguel Pereira, João / Lourenço, Paulo B. / Lopes, Rúben F. R.	Experimental and numerical analysis on the structural fire behaviour of three-cell hollowed concrete masonry walls	111439
Shi, Tingwei / Zhang, Xihong / Hao, Hong / Chen, Chong	Experimental and numerical investigation on the compressive properties of interlocking blocks	111561
Scazzosi, Riccardo / Giglio, Marco / Manes, Andrea	Experimental and numerical investigation on the perforation resistance of double-layered metal shields under high-velocity impact of soft-core projectiles	111467
Maiorana, E. / Tetougueni, C. D. / Zampieri, P. / Pellegrino, C.	Experimental and numerical investigations on slender panels with holes under symmetrical localised loads	111323
Zhang, Guangda / Han, Qiang / Xu, Kun / Du, Xiuli / He, Weili	Experimental investigation of seismic behavior of UHPC-filled socket precast bridge column-foundation connection with shear keys	111527
Zhou, Xuhong / Men, Pengfei / Di, Jin / Qin, Fengjiang	Experimental investigation of the vertical shear performance of steel–concrete composite girders under negative moment	111487
Chen, Wanxiang / Luo, Lisheng / Guo, Zhikun / Yuan, Peng	Experimental studies on load-carrying capacity of HFR-LWC beams accompanying membrane action	111497
Guzmán, Andrés / Guzmán, Osvaldo / Arteta, Carlos / Carrillo, Julian	Experimental study of the influence of welding space in cold-formed built-up box flexural members	111541
Bahtiar, Effendi Tri / Malkowska, Dominika / Trujillo, David / Nugroho, Naresworo	Experimental study on buckling resistance of Guadua angustifolia bamboo column	111548
Ma, Fudong / Deng, Mingke / Ma, Yuren / Lu, Hao / Yang, Yong / Sun, Hongzhe	Experimental study on interior precast concrete beam–column connections with lap-spliced steel bars in field-cast RPC	111481
Brown, Justin R. / Li, Minghao / Tannert, Thomas / Moroder, Daniel	Experimental study on orthogonal joints in cross-laminated timber with self-tapping screws installed with mixed angles	111560
Zhang, Ruijun / Li, Aiqun	Experimental study on the performance of damaged precast shear wall structures after base isolation	111553
Lyu, C. H. / Gilbert, B. P. / Guan, H. / Underhill, I. D. / Gunalan, S. / Karampour, H.	Experimental study on the quasi-static progressive collapse response of post-and-beam mass timber buildings under an edge column removal scenario	111425
Di, Jin / Ruan, Xiaozheng / Zhou, Xuhong / Wang, Jie / Peng, Xi	Fatigue assessment of orthotropic steel bridge decks based on strain monitoring data	111437
Lipiäinen, Kalle / Ahola, Antti / Skriko, Tuomas / Björk, Timo	Fatigue strength characterization of high and ultra-high-strength steel cut edges	111544
Marzec, I. / Bobinski, J. / Tejchman, J. / Schönnagel, J.	Finite element analysis on failure of reinforced concrete corner in sewage tank under opening bending moment	111506
Rodríguez, D. / Brunesi, E. / Nascimbene, R.	Fragility and sensitivity analysis of steel frames with bolted-angle connections under progressive collapse	111508
Mansouri, Iman / Güneyisi, Esra Mete / Mosalam, Khalid M.	Improved shear strength model for exterior reinforced concrete beam-column joints using gene expression programming	111563
Di Cesare, Antonio / Ponzo, Felice Carlo / Telesca, Alessio	Improving the earthquake resilience of isolated buildings with double concave curved surface sliders	111498
Tomei, Valentina / Grande, Ernesto / Imbimbo, Maura	Influence of geometric imperfections on the efficacy of optimization approaches for grid-shells	111502
Baghlani, A. / Najafgholipour, M. A. / Khayat, M.	The influence of mechanical uncertainties on the free vibration of functionally graded graphene-reinforced porous nanocomposite shells of revolution	111356
Rivera, Jésus Emilio / Eid, Rami / Paultre, Patrick	Influence of synthetic fibers on the seismic behavior of reinforced-concrete circular columns	111493
Yao, Xianhua / Guo, Zi-Xiong / Basha, Syed Humayun / Huang, Qunxian	Innovative seismic strengthening of historic masonry walls using polymer mortar and steel strips	111507
Yu, Yuguo / Gao, Wei / Castel, Arnaud / Chen, Xiaojun / Liu, Airong	An integrated framework for modelling time-dependent corrosion propagation in offshore concrete structures	111482
Martins, R. / Carmo, R. N. F. / Costa, H. / Júlio, E. / Cordeiro, T. / Almeida, V.	Interface role in composite RC beams with a light-weight concrete core and an ultra high-durability concrete skin	111524
Mestar, Mohammed / Doudak, Ghasan / Polastri, Andrea / Casagrande, Daniele	Investigating the kinematic modes of CLT shear-walls with openings	111475
Kampas, G. / Kalapodis, N. / McLean, T. / Málaga-Chuquitaype, C.	Limit-state analysis of parabolic arches subjected to inertial loading in different gravitational fields using a variational formulation	111501
Obradović, Aleksandar / Šalinić, Slaviša / Grbović, Aleksandar	Mass minimization of an Euler-Bernoulli beam with coupled bending and axial vibrations at prescribed fundamental frequency	111538
Xiong, Xueyu / Xiao, Qisheng	Meso-scale simulation of bond behaviour between retarded-bonded tendons and concrete	111410
Zare Hosseinzadeh, A. / Tehrani, M. H. / Harvey, P. S.	Modal identification of building structures using vision-based measurements from multiple interior surveillance cameras	111517
Dell'Endice, Alessandro / Iannuzzo, Antonino / DeJong, Matthew J. / Van Mele, Tom / Block, Philippe	Modelling imperfections in unreinforced masonry structures: Discrete element simulations and scale model experiments of a pavilion vault	111499
Lopez, Manuel / Loureiro, Alfonso / Gutierrez, Ruth / Reinosa, José M.	A new analytical formulation for the stiffness and resistance of the additional plate in bending in beam-to-beam steel joints	111476
Al-Furjan, M. S. H. / Habibi, Mostafa / Ghabussi, Aria / Safarpour, Hamed / Safarpour, Mehran / Tounsi, Abdelouahed	Non-polynomial framework for stress and strain response of the FG-GPLRC disk using three-dimensional refined higher-order theory	111496
Prawin, J. / Anbarasan, R.	A novel Mel-frequency cepstral analysis based damage diagnostic technique using ambient vibration data	111552
Jeawon, Y. / Drosopoulos, G. A. / Foutsitzi, G. / Stavroulakis, G. E. / Adali, S.	Optimization and analysis of frequencies of multi-scale graphene/fibre reinforced nanocomposite laminates with non-uniform distributions of reinforcements	111525
Dillen, Wouter / Lombaert, Geert / Mertens, Ruben / Van Beurden, Hanne / Jaspaert, Dirk / Schevenels, Mattias	Optimization in a realistic structural engineering context: Redesign of the Market Hall in Ghent	111473
Türkmen, Ö. S. / Wijte, S. N. M. / De Vries, B. T. / Ingham, J. M.	Out-of-plane behavior of clay brick masonry walls retrofitted with flexible deep mounted CFRP strips	111448
Vilguts, Aivars / Stamatopoulos, Haris / Malo, Kjell Arne	Parametric analyses and feasibility study of moment-resisting timber frames under service load	111583
Wang, Fangying / Liang, Yating / Zhao, Ou / Young, Ben	Pin-ended press-braked S960 ultra-high strength steel angle section columns: Testing, numerical modelling and design	111418
Yang, Yiming / Peng, Jianxin / Liu, Xinhua / Cai, Steve C. S. / Zhang, Jianren	Probability analysis of web cracking of corroded prestressed concrete box-girder bridges considering aleatory and epistemic uncertainties	111486
Dicleli, Murat / Görgülü, Ali Günalp	Proposed minimum restoring force requirements for seismic isolated structures	111549
Sleczka, Lucjan / Leń, Dariusz	Prying action in bolted circular flange joints: Approach based on component method	111528
Yi, Ou / Zhuge, Yan / Ma, Xing / Gravina, Rebecca J. / Mills, Julie E. / Youssf, Osama	Push-off and Pull-out Bond Behaviour of CRC Composite Slabs – An Experimental Investigation	111480
Dong, Hanlin / He, Minjuan / Christopoulos, Constantin / Li, Zheng	Quasi-static tests and parametric simulations of hybrid steel frame and light wood shear walls with frictional dampers	111485
Guo, Wei / Zeng, Chen / Gou, Hongye / Gu, Quan / Wang, Tao / Zhou, Huimeng / Zhang, Bo / Wu, Jiliang	Real-time hybrid simulation of high-speed train-track-bridge interactions using the moving load convolution integral method	111537
Soo Lon Wah, William / Chen, Yung-Tsang / Owen, John S.	A regression-based damage detection method for structures subjected to changing environmental and operational conditions	111462
Zhang, Xuan-Yi / Lu, Zhao-Hui / Zhao, Yan-Gang / Li, Chun-Qing	Reliability analysis of CRTS II track slab considering multiple failure modes	111557
Aloisio, Angelo / Fragiacomo, Massimo	Reliability-based overstrength factors of cross-laminated timber shear walls for seismic design	111547
Caprili, Silvia / Panzera, Ivan / Salvatore, Walter	Resilience-based methodologies for design of steel structures equipped with dissipative devices	111539
Karimipour, Arash / Edalati, Mahmoud	Retrofitting of the corroded reinforced concrete columns with CFRP and GFRP fabrics under different corrosion levels	111523
Pappas, Athanasios / d'Ayala, Dina / Dassanayake, Darshana T. / Antonini, Alessandro / Raby, Alison	Rocking of offshore lighthouses under extreme wave impacts: Limit analysis, analytic formulations and distinct element method	111534
Pauletta, Margherita / Di Marco, Caterina / Frappa, Giada / Miani, Marco / Campione, Giuseppe / Russo, Gaetano	Seismic behavior of exterior RC beam-column joints without code-specified ties in the joint core	111542
Cai, Zhong-Kui / Yuan, Wei / Wang, Zhenyu / Smith, Scott T.	Seismic behavior of precast segmental bridge columns reinforced with hybrid FRP-steel bars	111484
Zhang, Xinchen / Li, Bing	Seismic performance of exterior reinforced concrete beam-column joint with corroded reinforcement	111556
Zhang, Yu / Li, Beibei / Li, Zhu / Ma, Gang / Liu, Yuanzhen	Seismic performance of interior beam-column joints in reinforced glazed hollow bead insulation concrete frames	111494
Forgács, Tamás / Sarhosis, Vasilis / Ádány, Sándor	Shakedown and dynamic behaviour of masonry arch railway bridges	111474
Luongo, Angelo / D'Annibale, Francesco / Ferretti, Manuel	Shear and flexural factors for static analysis of homogenized beam models of planar frames	111440
Jiang, Haibo / Shao, Tengfei / Fang, Zhuangcheng / Xiao, Jie / Hu, Zebin	Shear-friction behavior of grooved construction joints between a precast UHPC girder and a cast-in-place concrete slab	111610
Campione, Giuseppe	Simple equations for strength and deformability verification of tubular steel wind turbine towers	111566
Zhou, Xuhong / Xiang, Yi / Shi, Yu / Xu, Lei / Zou, Yuxuan	Simplified design method of cold-formed steel columns with built-up box sections	111532
Zhang, Li / Xue, Songtao / Zhang, Ruifu / Xie, Liyu / Hao, Linfei	Simplified multimode control of seismic response of high-rise chimneys using distributed tuned mass inerter systems (TMIS)	111550
Qi, Liangjie / Xue, Jianyang / Sui, Yan / Wu, Zhanjing	Smart retrofitting of irregular steel joints in traditional Chinese buildings by viscous dampers	111526
Santos, José / Henriques, Antonio Abel	Span-to-depth ratio limits for RC continuous beams and slabs based on MC2010 and EC2 ductility and deflection requirements	111565
Wei, Bowen / Liu, Bo / Yuan, Dongyang / Mao, Ying / Yao, Siyang	Spatiotemporal hybrid model for concrete arch dam deformation monitoring considering chaotic effect of residual series	111488
Leontari, Aikaterini / Apostolou, Marios	Stability and rocking response of non-uniform masonry arches: The ‘part-elliptical’ profile	111519
Slowik, Ondřej / Novák, Drahomír / Novak, Lukas / Strauss, Alfred	Stochastic modelling and assessment of long-span precast prestressed concrete elements failing in shear	111500
Qin, Renyuan / Zhou, Ao / Chow, Cheuk Lun / Lau, Denvid	Structural performance and charring of loaded wood under fire	111491
Loyola, L. / Rojas, F. / Ruiz, R. O.	Synthetic stochastic ground motions compatible with the Chilean seismic hazard	111471
Katariya, Pankaj V. / Panda, Subrata Kumar / Mehar, Kulmani	Theoretical modelling and experimental verification of modal responses of skewed laminated sandwich structure with epoxy-filled softcore	111509
Grillanda, Nicola / Chiozzi, Andrea / Milani, Gabriele / Tralli, Antonio	Tilting plane tests for the ultimate shear capacity evaluation of perforated dry joint masonry panels. Part II: Numerical analyses	111460
De Domenico, Dario	Torsional strength of RC members using a plasticity-based variable-angle space truss model accounting for non-uniform longitudinal reinforcement	111540
Minafò, Giovanni / Camarda, Gaetano	Use of fiber-section beam elements for modelling the monotonic flexural response of RC jacketed columns	111503

Informations
sur cette fiche
IssueID
54889
Publié(e) le:
09.01.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - février 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - février 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.