Taewan Kim 
- (2024): Evaluation of coarse aggregate properties in hardened concrete based on segment anything model (SAM). Dans: Construction and Building Materials, v. 453 (novembre 2024).
- (2024): Evaluating the sustainability of microwave pre-cured high-volume slag concrete: Mechanical properties, environmental impact and cost-benefit analysis. Dans: Journal of Building Engineering, v. 96 (novembre 2024).
- (2024): Hydration Characteristics of Slag-Ca(OH)2-Al2O3 Binder in a 60 °C Curing Environment with Brine as Mixing Water. Dans: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 janvier 2024).
- (2024): Deep learning integrated Bayesian health indicator for cross-machine health monitoring. Dans: Structural Health Monitoring, v. 23, n. 6 (février 2024).
- (2023): Development of construction materials using red mud and brine. Dans: Case Studies in Construction Materials, v. 18 (juillet 2023).
- (2023): Influence of brine on hydration reaction of calcium sulfoaluminate and slag blended cement. Dans: Case Studies in Construction Materials, v. 18 (juillet 2023).
- (2022): Cost–Benefit Analysis of Scan-vs-BIM-Based Quality Management. Dans: Buildings, v. 12, n. 12 (1 décembre 2022).
- (2022): Effects of sodium aluminate and reverse osmosis brine on hydration and mechanical properties of slag. Dans: Construction and Building Materials, v. 360 (décembre 2022).
- (2022): The compressive strength and microstructural properties of alkali-activated slag cement mixed with zinc oxide. Dans: Magazine of Concrete Research, v. 74, n. 18 (septembre 2022).
- (2022): Effect of reverse-osmosis brine and sodium aluminate on the hydration properties and strength of alkali-activated slag cement. Dans: Case Studies in Construction Materials, v. 16 (juin 2022).
- (2021): Characteristics of alkali-activated slag cement-based ultra-lightweight concrete with high-volume cenosphere. Dans: Construction and Building Materials, v. 302 (octobre 2021).
- (2021): Influence of seawater on alkali-activated slag concrete. Dans: Materials and Structures, v. 54, n. 3 (16 avril 2021).
- (2021): Empirical Observation of Maximum Throughput Change in Isolated Merging Bottlenecks Depending on On-Ramp Traffic Flow Ratio. Dans: KSCE Journal of Civil Engineering, v. 25, n. 5 (12 mars 2021).
- (2020): The Mechanical Properties of Alkali-Activated Slag-Silica Fume Cement Pastes by Mixing Method. Dans: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 janvier 2020).
- (2013): Improvement of a Requirement for Providing Special Boundary Element Considering Feature of Domestic High-rise Shear Walls. Dans: Architectural Research, v. 15, n. 1 (mars 2013).
- (2016): A comparison of ground-based LiDAR and met mast wind measurements for wind resource assessment over various terrain conditions. Dans: Journal of Wind Engineering and Industrial Aerodynamics, v. 158 (novembre 2016).
- (2018): Assessment of Korean Seismic Design Practice for Low-rise Reinforced Concrete Wall-frame Buildings. Dans: Journal of Asian Architecture and Building Engineering, v. 17, n. 3 (septembre 2018).
- (2009): Assessment of progressive collapse-resisting capacity of steel moment frames. Dans: Journal of Constructional Steel Research, v. 65, n. 1 (janvier 2009).
- (2009): Collapse analysis of steel moment frames with various seismic connections. Dans: Journal of Constructional Steel Research, v. 65, n. 6 (juin 2009).
- (2010): Flexural behavior of steel I-beam prestressed with externally unbonded tendons. Dans: Journal of Constructional Steel Research, v. 66, n. 1 (janvier 2010).
- (2010): Flexural behavior of continuous steel girder with external post-tensioning and section enhancement. Dans: Journal of Constructional Steel Research, v. 66, n. 2 (février 2010).
- (2008): Concrete Maturity Method Using Variable Temperature Curing for Normal and High-Strength Concrete. I: Experimental Study. Dans: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 12 (décembre 2008).
- (2008): Concrete Maturity Method Using Variable Temperature Curing for Normal-Strength Concrete Mixes. II: Theoretical Study. Dans: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 12 (décembre 2008).
- (2016): Modeling lane formation in pedestrian counter flow and its effect on capacity. Dans: KSCE Journal of Civil Engineering, v. 20, n. 3 (mars 2016).
- (2007): Application of FEMA methodology to RC shear wall buildings governed by flexure. Dans: Engineering Structures, v. 29, n. 10 (octobre 2007).
- (2009): The dependence of infiltration pressure and volume in zeolite Y on potassium chloride concentration. Dans: Smart Materials and Structures, v. 18, n. 2 (février 2009).
- (2007): Inspection of Quebec Street Bridge in Denver, Colorado: Destructive and Nondestructive Testing. Dans: Journal of Performance of Constructed Facilities (ASCE), v. 21, n. 3 (juin 2007).
- (2009): Investigation of Progressive Collapse-Resisting Capability of Steel Moment Frames Using Push-Down Analysis. Dans: Journal of Performance of Constructed Facilities (ASCE), v. 23, n. 5 (octobre 2009).
- (2018): Mechanical Properties of Na2CO3-Activated High-Volume GGBFS Cement Paste. Dans: Advances in Civil Engineering, v. 2018 ( 2018).
- (2012): Parametric and comparative study of spandrel beam effect on the punching shear strength of reinforced concrete flat plates. Dans: The Structural Design of Tall and Special Buildings, v. 21, n. 8 (octobre 2012).
Structurae coopère avec
