Josef Füssl 
- (2024): Evaluation of Moisture-Induced Stresses in Wood Cross-Sections Determined with a Time-Dependent, Plastic Material Model during Long-Time Exposure. Dans: Buildings, v. 14, n. 4 (27 mars 2024).
- (2023): Numerical simulation of CLT moisture uptake and dry-out following water infiltration through end-grain surfaces. Dans: Journal of Building Engineering, v. 80 (décembre 2023).
- (2023): A continuum micromechanics model challenged to predict thermo-mechanical properties of 18 different clay bricks and sensitivity analysis revealing effects of compositional and microstructural features. Dans: Construction and Building Materials, v. 403 (novembre 2023).
- (2023): A numerical unit cell model for predicting the failure stress state of vertically perforated clay block masonry under arbitrary in-plane loads. Dans: Engineering Structures, v. 293 (octobre 2023).
- (2023): Multiscale micromechanics modeling of plant fibers: upscaling of stiffness and elastic limits from cellulose nanofibrils to technical fibers. Dans: Materials and Structures, v. 56, n. 1 (30 janvier 2023).
- (2022): Advanced Computational Design – digitale Methoden für die frühe Entwurfsphase. Dans: Bautechnik, v. 99, n. 10 (octobre 2022).
- (2022): Computergestützte Modellierung von Feuchtetransportprozessen in Holzwerkstoffen. Dans: Bautechnik, v. 99, n. 10 (octobre 2022).
- (2021): Automated morphometrical characterization of material phases of fired clay bricks based on Scanning Electron Microscopy, Energy Dispersive X-ray Spectroscopy and Powder X-ray Diffraction. Dans: Construction and Building Materials, v. 288 (juin 2021).
- (2020): DKMQ24 shell element with improved membrane behaviour. Dans: Finite Elements in Analysis and Design, v. 175 (août 2020).
- (2022): Modeling approach to estimate the bending strength and failure mechanisms of glued laminated timber beams. Dans: Engineering Structures, v. 255 (mars 2022).
- (2021): "Experimental and numerical determination of the screw deformation in laminated beech veneer lumber as a result of moisture‐induced swelling". Dans: civil engineering design, v. 3, n. 5-6 (décembre 2021).
- (2021): Effect of cast-in-place concrete application on moisture distribution in timber-concrete composite floors with notched connections, investigated via finite element simulations. Dans: Journal of Building Engineering, v. 42 (octobre 2021).
- (2021): Finite-element-based concept to predict stiffness, strength, and failure of wood composite I-joist beams under various loads and climatic conditions. Dans: Engineering Structures, v. 245 (octobre 2021).
- (2021): Numerical assessment of wood moisture content-based assignments to service classes in EC 5 and a prediction concept for moisture-induced stresses solely using relative humidity data. Dans: Engineering Structures, v. 245 (octobre 2021).
- (2021): A finite-element-based approach to quantify the impact of bed joint reinforcement on the compressive strength of vertically perforated clay block masonry. Dans: Engineering Structures, v. 239 (juillet 2021).
- (2021): Finite-element-based prediction of moisture-induced crack patterns for cross sections of solid wood and glued laminated timber exposed to a realistic climate condition. Dans: Construction and Building Materials, v. 271 (février 2021).
- (2019): Modeling the non-trivial behavior of anisotropic beams: A simple Timoshenko beam with enhanced stress recovery and constitutive relations. Dans: Composite Structures, v. 229 (décembre 2019).
- (2019): Bending strength predictions of cross-laminated timber plates subjected to concentrated loading using 3D finite-element-based limit analysis approaches. Dans: Composite Structures, v. 220 (juillet 2019).
- (2020): EDX/XRD-based identification of micrometer-sized domains in scanning electron micrographs of fired clay. Dans: Materials and Structures, v. 53, n. 4 (26 juin 2020).
- (2020): The viscoelastic behaviour of material phases in fired clay identified by means of grid nanoindentation. Dans: Construction and Building Materials, v. 231 (janvier 2020).
- (2018): Stochastic engineering framework for timber structural elements. Dans: Beton- und Stahlbetonbau, v. 113 (février 2018).
- (2018): Strength predictions of clear wood at multiple scales using numerical limit analysis approaches. Dans: Computers & Structures, v. 196 (février 2018).
- (2017): Serviceability Analysis of Non-Prismatic Timber Beams: Derivation and Validation of New and Effective Straightforward Formulas. Dans: Open Journal of Civil Engineering, v. 7, n. 1 ( 2017).
- (2016): An algorithm for the geometric reconstruction of knots within timber boards based on fibre angle measurements. Dans: Construction and Building Materials, v. 124 (octobre 2016).
- (2017): The compressive strength of vertically perforated clay block masonry predicted by means of a unit-cell type numerical simulation tool taking discrete cracking into account. Dans: Construction and Building Materials, v. 150 (septembre 2017).
- (2016): The bitumen microstructure: a fluorescent approach. Dans: Materials and Structures, v. 49, n. 1-2 (janvier 2016).
- (2015): Influence of asphaltene content on mechanical bitumen behavior: experimental investigation and micromechanical modeling. Dans: Materials and Structures, v. 48, n. 10 (octobre 2015).
- (2017): A probabilistic approach for the linear behaviour of glued laminated timber. Dans: Engineering Structures, v. 148 (octobre 2017).
- (2018): Stochastic engineering framework for timber structural elements and its application to glued laminated timber beams. Dans: Construction and Building Materials, v. 190 (novembre 2018).
Structurae coopère avec
