Structures - octobre 2021

Publié:	octobre 2021

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Chen, Jinxiang / Huang, Jiaying / Pan, Longcheng / Zhao, Tidong / Zhang, Xiaoming / Lin, Haiwei	The 3D lightweight structural characteristics of the beetle forewing: Verification	2943-2949
Liu, TingJin / Lu, Jiandong / Wang, Di / Liu, Hongyuan / Mo, Nuanjiao / Zhai, Lihua	3D nonlinear finite element modelling of mechanical behavior of a new wall-beam-strut joint for prefabricated underground construction and validation again experimental testing	3202-3221
Xiao, Han / Hedegaard, Brock D.	Absolute nodal coordinate formulation for dynamic analysis of reinforced concrete structures	201-213
Mohammadi, R. Karami / Ghamari, Hadi / Farsangi, Ehsan Noroozinejad	Active control of building structures under seismic load using a new uniform deformation-based control algorithm	593-605
Temur, Rasim	Analyses of plane stress and plane strain through energy minimization	728-736
Werdine, Demarcus / Oliver, Guilherme Antônio / Alves de Almeida, Fabricio / de Lourdes Noronha, Mirian / Gomes, Guilherme Ferreira	Analysis of the properties of the self-compacting concrete mixed with tire rubber waste based on design of experiments	3461-3474
Ganesh, P. / Murthy, A. Ramachandra	Analytical model to predict the fatigue life of damaged RC beam strengthened with GGBS based UHPC	2559-2569
Saini, Amit / Prakash, S. Suriya	Analytical study on the effectiveness of hybrid FRP strengthening on behaviour of slender reinforced concrete square columns	4218-4242
Fang, Zhiyuan / Roy, Krishanu / Ma, Quincy / Uzzaman, Asraf / Lim, James B. P.	Application of deep learning method in web crippling strength prediction of cold-formed stainless steel channel sections under end-two-flange loading	2903-2942
Li, Z. / Wang, C. / Wang, R.	Application of screw reinforcement in the slotted-in bamboo-steel-bamboo connections	4112-4123
Zhang, Ni / Lu, Pingping / Zhao, Zhongwei / Wu, Xiufeng	Applications of simplified 3D FE model in seismic analysis for friction-damped posttensioned steel frame structures	804-819
Amin, Jignesh / Gondaliya, Kaushik / Mulchandani, Chirag	Assessment of seismic collapse probability of RC shaft supported tank	2639-2658
Abadel, Aref A. / Khan, M. Iqbal / Masmoudi, Radhouane	Axial capacity and stiffness of post-heated circular and square columns strengthened with carbon fiber reinforced polymer jackets	2599-2610
Hong, Chaokun / Li, Haitao / Xiong, Zhenhua / Lorenzo, Rodolfo / Li, Xin / Wang, Zhen	Axial compressive behavior of laminated bamboo lumber columns with a chamfered section	678-692
Hu, Xiao / Chen, Zhenlin / Bu, Xiangbo	Axial compressive behavior on steel tube-retrofitted circular RC short columns with grout under preload	2500-2519
Prakash, G. / Balomenos, G. P.	A Bayesian approach to model selection and averaging of hydrostatic-season-temperature-time model	4359-4370
Yu, Chao-Qun / Tong, Jing-Zhong / Tong, Gen-shu	Behavior and design of slender concrete-filled wide rectangular steel tubular columns under axial compression	3137-3146
Ahmad, Junaid / Yu, Tao / Hadi, Muhammad N. S.	Behavior of GFRP bar reinforced geopolymer concrete filled GFRP tube columns under different loading conditions	1633-1644
Li, Ruizhe / Deng, Mingke / Zhang, Yangxi	Behavior of highly ductile fiber–reinforced concrete columns under eccentric loading	3357-3370
Suman, Saurabh / Samanta, Avik	Behavior of laterally unsupported monosymmetric steel I-section beams at elevated temperature under non-uniform moments	3324-3356
Al-Khafaji, Ayssar / Salim, Hani / El-Sisi, Alaa	Behavior of RC beams strengthened with CFRP sheets under sustained loads	4690-4700
Elkawas, A. A. / Hassanein, M. F. / El Hadidy, A. M. / El-Boghdadi, M. H. / Elchalakani, Mohamed	Behaviour of corrugated web girders subjected to lateral-torsional buckling: Experimental tests and numerical modelling	152-168
Sachdeva, Payal / Danie Roy, A. B. / Kwatra, Naveen	Behaviour of steel fibers reinforced exterior beam-column joint using headed bars under reverse cyclic loading	3929-3943
Cui, Tao / He, Haoxiang / Zhao, Xinli / Zhou, Daxing	Bending performance analysis of precast composite beams with precast ECC plate	986-998
Xiong, Zhihua / Zhao, Chenyu / Liu, Yuqing / Xin, Haohui / Meng, Yang	Biaxial stress concentration of pultruded GFRP perforated plate considering anisotropic factor	2803-2810
Haffar, Muhammad Ziad / Kövesdi, Balázs / Ádány, Sándor	Buckling of compressed plates with closed-section longitudinal stiffeners: Two new mathematical models for resistance prediction	3526-3539
Wang, C. Y.	Buckling of square and hexagonal semi-rigid rings by concentrated loads	2872-2878
Rafiee, Mojtaba / Hejazi, Mehrdad / Amoushahi, Hossein	Buckling response of composite cylindrical shells with various stiffener layouts under uniaxial compressive loading	4514-4537
Wu, Shan / He, Haoxiang / Chen, Yifei / Chen, Jianwei	Calculation method of time-variant additional damping ratio and bi-objective design of RC frame with BRBs	2546-2558
Li, R. W. / Cao, D. S. / Wu, H. / Wang, D. F.	Collapse analysis and damage evaluation of typical simply supported double-pier RC bridge under truck collision	3222-3238
Güneş, Necmettin / Ulucan, Zülfü Çınar	Collapse probability of code-based design of a seismically isolated reinforced concrete building	2402-2412
Li, Yao / Yin, Shiping / Lv, Henglin	Combined effects of dry-wet cycles and sustained loads on the seismic behavior of TRC-strengthened RC columns	2226-2237
Xie, Zhiqiang / Zhang, Wenying / Chen, Tian / Zhou, Daxing / Shi, Leilei / Tang, Yi / Yu, Cheng	Comparative analysis and design method of shear strength for hybrid SPR-SDS joints in thin-walled steel structures	4313-4329
Deifalla, A.	A comparative study and a simplified formula for punching shear design of concrete slabs with or without membrane tensile forces	1936-1953
Zhou, Hao / Jiang, Youbao / Adhikari, Sondipon / Yin, Qianqian / Cai, Jianguo	Comparisons of design methods for beam string structure based on reliability and progressive collapse analysis	2166-2176
Ali, Ahmed H. / Mohamed, Hamdy M. / Benmokrane, Brahim	Composite FRP reinforced concrete members with fiber reinforced polymer spirals	1868-1877
Debnath, Partha Pratim / Chan, Tak-Ming	A comprehensive numerical approach for modelling blind-bolted CFST connections	2208-2225
Li, Chao / Deng, Hong-Zhou / Gao, Yi-Ran / Song, Xue-Qi / Hu, Xiao-yi	Compression analysis of external double-layered flange connection in transmission tower	3002-3016
Quan, Guan / Ye, Jun / Li, Wenchao	Computational modelling of Cold-formed steel lap joints with screw fasteners	230-245
Todisco, Leonardo / Corres, Hugo / Pérez, Alejandro / Addante, Angela / Cañada, Javier	Conceptual design of spatial arch footbridges supporting curved decks	1207-1215
Nadeem, Gohar / Safiee, Nor Azizi / Abu Bakar, Nabilah / Karim, Izian Abd / Mohd Nasir, Noor Azline	Connection design in modular steel construction: A review	3239-3256
Doroudi, Rouzbeh / Hosseini Lavassani, Seyed Hossein	Connection of coupled buildings: A state-of-the-art review	1299-1326
Chen, Wen-Feng / Liu, Yao-Peng / Du, Zuo-Lei / Bai, Rui / Chan, Siu-Lai	A consistent tapered beam-column element allowing for different variations and initial imperfections	3443-3460
Chu, S. H. / Kwan, A. K. H.	Crack mitigation utilizing enhanced bond of rebars in SFRC	4141-4147
Al-Fakih, Amin / Hisbany Mohd Hashim, Mohd / Alyousef, Rayed / Mutafi, Ayad / Hussein Abo Sabah, Saddam / Tafsirojjaman, T.	Cracking behavior of sea sand RC beam bonded externally with CFRP plate	1578-1589
Gubana, Alessandra / Melotto, Massimo	Cyclic numerical analyses on wood-based in-plane retrofit solutions for existing timber floors	1764-1774
Zhang, Yifeng / Zhu, Jinsong	Damage identification for bridge structures based on correlation of the bridge dynamic responses under vehicle load	68-76
Fang, Zhiyuan / Roy, Krishanu / Mares, Jiri / Sham, Chiu-Wing / Chen, Boshan / Lim, James B. P.	Deep learning-based axial capacity prediction for cold-formed steel channel sections using Deep Belief Network	2792-2802
Park, Sang Ho / Yoon, Doohyun / Kim, SangHun / Geem, Zong Woo	Deep neural network applied to joint shear strength for exterior RC beam-column joints affected by cyclic loadings	1819-1832
Dhamne, Rohan Ramesh / Mishra, Swapnil / Kumar, Ankesh / Rao, K. S.	Deformation behavior of D-Shaped shallow tunnels under dynamic loading conditions	3973-3983
Pérez-Valcárcel, J. / Muñoz-Vidal, M. / Suárez-Riestra, F. / López-César, Isaac R. / Freire-Tellado, M. J.	Deployable cylindrical vaults with reciprocal linkages for emergency buildings	4461-4474
Xiong, Zhe / Chen, Anyang / Chen, Lexian / Li, Yinglei / He, Jianian / Li, Lijuan / Zou, Xiaozhou / Qiu, Yu / Luo, Yunhai	Design of bolted ball-cylinder joints under different load types	214-229
Xu, Yan / Zhang, Mingyu / Zheng, Baofeng	Design of cold-formed stainless steel circular hollow section columns using machine learning methods	2755-2770
Thonstad, Travis / Eberhard, Marc O. / Stanton, John F.	Design of prestressed, jointed columns for enhanced seismic performance	1007-1019
Suthar, Sameer J. / Jangid, Radhey Shyam	Design of tuned liquid sloshing dampers using nonlinear constraint optimization for across-wind response control of benchmark tall building	2675-2688
Mohandoss, Prabha / Pillai, Radhakrishna G. / Gettu, Ravindra	Determining bond strength of seven-wire strands in prestressed concrete	2413-2423
Mezrea, Pelin E. / Ispir, Medine / Balci, Irem A. / Bal, Ihsan E. / Ilki, Alper	Diagonal tensile tests on historical brick masonry wallets strengthened with fabric reinforced cementitious mortar	935-946
Xu, Qiang / Xu, Shutong / Chen, Jianyun / Li, Jing	Dimensionless analysis of pulse-like effects on the seismic behavior of a dam based on wavelet-decomposed near-fault ground motions	2003-2018
Jiang, Haibo / Huang, Chengwang / Feng, Jiahui / Gao, Xingjun / Wang, Tianlong / Zhong, Zucai	Direct shear behavior of castellated dry RPC joints in precast concrete segmental bridges	4579-4595
Ding, Lining / Lei, Mengke / Wang, Xin / Shi, Yuwei / Zhu, Zhongguo / Yu, Pancheng / Wu, Zhishen	Durability of concrete members reinforced with steel-FRP composite bars under dry-wet cycles of seawater	2273-2283
Yousefi, Amir Hossein / Memarzadeh, Parham / Afshari, Hassan / Jalil Hosseini, Saied	Dynamic characteristics of truncated conical panels made of FRPs reinforced with agglomerated CNTs	4701-4717
Xing, Xinkui / Lin, Lanri / Qin, Heying	Dynamic tensile behavior of steel strands at different strain rates	378-389
Miah, Md Jihad / Kawsar Ali, Md. / Lo Monte, Francesco / Chandra Paul, Suvash / Babafemi, Adewumi John / Savija, Branko	The effect of furnace steel slag powder on the performance of cementitious mortar at ambient temperature and after exposure to elevated temperatures	2811-2823
Pirouzfar, Sabah / Zeinedini, Afshin	Effect of geometrical parameters on the flexural properties of sandwich structures with 3D-printed honeycomb core and E-glass/epoxy Face-sheets	2724-2738
Orouji, Maedeh / Zahrai, Seyed Mehdi / Najaf, Erfan	Effect of glass powder & polypropylene fibers on compressive and flexural strengths, toughness and ductility of concrete: An environmental approach	4616-4628
Hejazi, Malihe / Jalaeefar, Ali	Effect of infills on seismic resilience of special steel moment resisting frames	2771-2791
Khatri, Ashish P. / Katikala, Sai Ram / Kotapati, Vijaya Krishna	Effect of load height on elastic buckling behavior of I-shaped cellular beams	1923-1935
Yousef-beik, Seyed Mohamad Mahdi / Veismoradi, Sajad / Zarnani, Pouyan / Quenneville, Pierre	Effect of second-order actions on the performance of resilient slip friction joints: Analytical and experimental investigation	957-970
Yang, Yang / Gong, Weiming / Cheng, Yi Pik / Dai, Guoliang / Zou, Yuwan / Liang, Fayun	Effect of soil-pile-structure interaction on seismic behaviour of nuclear power station via shaking table tests	2990-3001
Hassanein, M. F. / Elkawas, A. A. / Bock, Marina / Shao, Yong-Bo / Elchalakani, M.	Effect of using slender flanges on EN 1993-1-5 design model of mono-symmetric S460 corrugated web bridge girders	330-342
Zhang, Jiarui / Wei, Kai / Gao, Libao / Qin, Shunquan	Effect of V-shape canyon topography on seismic response of deep-water rigid-frame bridge based on simulated ground motions	1077-1095
natesan, vijayakumar / Shanmugasundaram, Bharath / Sekar, Monish / Madhavan, Mahendrakumar	Effectiveness of CFS web cleat bolted connections between beam–to–column	3269-3283
Jabbari, Milad / Raftery, Gary M. / Lim, James B. P.	Effects of elevated temperature on epoxy bonded CFRP-to-steel joints in Mode I fracture	3540-3549
Qian, Kai / Lan, Dong-Qiu / Li, Shun-Kai / Fu, Feng	Effects of infill walls on load resistance of multi-story RC frames to mitigate progressive collapse	2534-2545
Chen, Gang / Gao, Danying / Zhu, Haitang / Yuan, Jian Song / Xiao, Xu / Wang, Weiqiang	Effects of novel multiple hooked-end steel fibres on flexural tensile behaviour of notched concrete beams with various strength grades	3644-3654
Du, Yunlou / Feng, Guorui / Kang, Hongpu / Zhang, Yujiang / Zhang, Xihong	Effects of steel fiber grout on the mechanical performance and failure characteristics of fully grouted bolts	1096-1106
Siami Kaleybar, Reza / Tehrani, Payam	Effects of using different arrangements and types of viscous dampers on seismic performance of intermediate steel moment frames in comparison with different passive dampers	3382-3396
Li, Yanchun / Zhou, Tianhua / Ren, Lujie / Sang, Liurui / Zhang, Lei	Elastic buckling of composite webs in back-to-back cold-formed steel built-up columns-Part II: Design formula	3515-3525
Hawkins, Will / Cooper, Samuel / Allen, Stephen / Roynon, Jonathan / Ibell, Tim	Embodied carbon assessment using a dynamic climate model: Case-study comparison of a concrete, steel and timber building structure	90-98
Torfehnejad, Mohammadmehdi / Sensoy, Serhan	Energy absorption and inelasticity distribution mechanisms in steel moment frames affected by mainshock-aftershock sequences	3550-3569
Feng, Huan / Zhou, Fangyuan / Ge, Hanbin / Zhu, Hongping / Zhou, Lemu	Energy dissipation enhancement through multi-toggle brace damper systems for mitigating dynamic responses of structures	2487-2499
Zhang, Bo / Wu, Yuntian / Zhou, Qing / Bai, Jiulin / Yang, Yeong-bin	Energy-balance based plastic design and analysis of hybrid coupled wall system	4096-4111
Liu, Zhenzhen / Lu, Yiyan / Li, Shan / Xiao, Lingwei	Enhanced bond-slip behavior between recycled aggregate concrete and steel tubes under repeated loading	1263-1282
Chowdhury, Sudip / Banerjee, Arnab / Adhikari, Sondipon	Enhanced seismic base isolation using inertial amplifiers	1340-1353
Liang, Xiangzhou / Yin, Shiping / Hu, Changshun	Environmental reduction factors of BFRP bars in coral aggregate concrete in high temperature and high humidity environments	3017-3024
Tarawneh, Ahmad / Majdalaweyh, Sereen / Dwairi, Hazim	Equivalent viscous damping of steel members for direct displacement based design	4781-4790
Mirzai, Nadia M. / Mansouri, Iman / Tezcan, Jale / Awoyera, Paul O. / Hu, Jong Wan	Estimating optimum parameters of a new SMA damper under different earthquake ground motions	2700-2712
Varsamis, Christos D. / Papanikolaou, Vassilis K.	Evaluation of current Eurocode 8 provisions on R/C ductile wall design	368-377
Verki, Amir Masoumi / Preciado, Adolfo	Experimental and analytical investigations of enhanced semi-rigid connections with dual pipe dampers	3765-3778
Dehghan, S. M. / Karamian, M. R. / Najafgholipour, M. A.	An experimental and analytical study on the out-of-plane behavior of URM prisms strengthened with SFRC overlays	1216-1234
Karagöz Işleyen, Ümmü / Kesik, Hacı İsmail	Experimental and numerical analysis of compression and bending strength of old wood reinforced with CFRP strips	259-271
Zhong, Jitao / Zhuang, Haiyan / Shiyang, Piaoxue / Zhou, Man	Experimental and numerical analysis of crack propagation in reinforced concrete structures using a three-phase concrete model	1705-1714
Tahenni, Touhami / Bouziadi, Farid / Boulekbache, Bensaid / Amziane, Sofiane	Experimental and numerical investigation of the effect of steel fibres on the deflection behaviour of reinforced concrete beams without stirrups	1603-1619
Sakr, Mohammed A. / El-khoriby, Saher R. / Seleemah, Aymen A. / Aboelnour, Mustafa M. / Osama, Bothaina	Experimental and numerical investigation on cyclic behavior of masonry infilled RC frames retrofitted with partially bonded CFRP strips	2238-2252
Wang, Meng-fu / Wu, Xi	Experimental and numerical investigation on seismic behavior of an innovative superimposed concrete shear wall	4286-4298
Zhang, Xu / Su, Jie / Xu, Youjun / Min, Bo	Experimental and numerical investigation the effects of insufficient concrete thickness on the damage behaviour of multi-arch tunnels	2628-2638
Salih, Rania / Abbas, Nadeem / Zhou, Fangyuan	Experimental and Numerical investigations on the cyclic load behavior of beams with rectangular web openings strengthened using FRP sheets	655-677
Lu, Shengcan / Wang, Zhan / Pan, Jianrong / Wang, Peng	Experimental and numerical research on the multi-stage seismic failure modes of steel frame with end-plate connection	3495-3514
Dias, João Victor Fragoso / Carvalho, Hermes / Rodrigues, Francisco Carlos / Maia, Karen Aparecida Freitas Peroni / Caldas, Rodrigo Barreto	Experimental and numerical study on CFS composite beams with riveted shear connectors	737-747
Gang, WANG / Caiqi, Zhao / Jun, Ma	Experimental and numerical study on the bending performance of an aluminium alloy flower-gusset composite joint	2475-2486
El-Tobgy, Hanan Hussien / Abu-Sena, Anwar Badawy Badawy / Fares, Mohamed Wahied	Experimental and parametric investigation of castellated steel beam-column in various expansion ratios, lengths and loading conditions	484-507
Gang, WANG / Caiqi, Zhao	Experimental and theoretical study on the bearing capacity of FGC joints for single-layer aluminium alloy lattice shell structures	2445-2458
Chakraborty, Sourav / Reddy, Supraj / Subramaniam, Kolluru V. L.	Experimental evaluation and analysis of flexural response of sandwich beam panels with an expanded polystyrene core	3798-3809
Sijavandi, Khalil / Sharbatdar, Mohammad Kazem / Kheyroddin, Ali	Experimental evaluation of flexural behavior of High-Performance Fiber Reinforced Concrete Beams using GFRP and High Strength Steel Bars	4256-4268
Li, Yanchun / Zhou, Tianhua / Li, Dong / Ding, Jiahao / Li, Chenyang	Experimental investigation and design of cold-formed steel U-section columns with the local and global interactive buckling	3371-3381
Tsiavos, Anastasios / Sextos, Anastasios / Stavridis, Andreas / Dietz, Matt / Dihoru, Luiza / Alexander, Nicholas A.	Experimental investigation of a highly efficient, low-cost PVC-Rollers Sandwich (PVC-RS) seismic isolation	1590-1602
Gulec, Abdulkadir / Kose, Mehmet Metin / Gögüş, Mehmet Tolga	Experimental investigation of flexural performance of T-section prefabricated cage reinforced beams with self-compacting concrete	2190-2197
Chen, Si / Wei, Yang / Peng, Donglin / Zhao, Kang / Hu, Yafeng	Experimental investigation of timber beams strengthened by bamboo scrimber with anchorage structure	1-11
Wang, Lianguang / Zhang, Yaosheng / Liu, Yaqi	Experimental investigation on flexural behaviors of cyclic overloading PRC beams strengthened with prestressed CFRP fabric	2713-2723
Alwesabi, Emad A. H. / Bakar, B. H. Abu / Alshaikh, Ibrahim M. H. / Zeyad, Abdullah M. / Altheeb, Ali / Alghamdi, Hussam	Experimental investigation on fracture characteristics of plain and rubberized concrete containing hybrid steel-polypropylene fiber	4421-4432
Huang, Zhen / Miao, Xin / Shen, Jie / Li, He / Zhang, Jiwen	Experimental investigation on shear behavior of concrete beams with CFRP grid shear reinforcements	3081-3093
Jiang, Haibo / Fang, Haozhen / Liu, Jie / Fang, Zhuangcheng / Zhang, Jianfeng	Experimental investigation on shear performance of transverse angle shear connectors	2050-2060
Mercier, C. / Khelil, A. / Al Mahmoud, F. / Blin-Lacroix, J.-L. / Pamies, A.	Experimental investigations of buckling behaviour of steel scaffolds	433-450
Todea, V. / Dan, D. / Florut, S. C. / Stoian, V.	Experimental investigations on the seismic behavior of composite steel concrete coupled shear walls with central openings	878-896
Riddell-Smith, Lauren / Cunningham, Lee / Mandal, Parthasarathi	Experimental study of 3-ply laminated glass beams subject to in-plane loads	3984-3998
Kim, Jae Hyun / Choi, Seung-Ho / Hwang, Jin-Ha / Jeong, Hoseong / Han, Sun-Jin / Kim, Kang Su	Experimental study on lateral behavior of post-tensioned precast beam-column joints	841-854
Xie, Luqi / Wu, Jing / Zhang, Jinyang / Liu, Chenyu	Experimental study on mechanical behaviour of replaceable energy dissipation connectors for precast concrete frames	3147-3162
Zhang, Zhaolei / Guo, Tong / Wang, Shiyuan / Liu, Jie / Wang, Libin	Experimental study on post-fire properties of steel wires of bridge suspender	1252-1262
Zhang, Jianwei / Zhao, Yirong / Li, Xiangyu / Li, Yida / Dong, Hongying	Experimental study on seismic performance of recycled aggregate concrete shear wall with high-strength steel bars	1457-1472
Zhao, Jianfeng / Lin, Ying / Li, Xi / Meng, Qingyi	Experimental study on the cyclic behavior of reinforced concrete bridge piers with non-uniform corrosion	999-1006
Taqi, Faten Y. / Mashrei, Mohammed A. / Oleiwi, Hayder M.	Experimental study on the effect of corrosion on shear strength of fibre-reinforced concrete beams	2317-2333
Kordzangeneh, Ghavam / Rezaeian, Abbas / Showkati, Hossein / Yekrangnia, Mohammad / Hosseini Dehdashti, Seyed Abdollah	Experimental study on the effect of square opening size and location on cyclic response of steel plate shear walls	4655-4669
Chen, Ren-Peng / Ma, Qing-Lei / Zhang, Yang / Wu, Huai-Na / Liu, Yuan / Lu, Li	Experimental study on the mechanical behaviour of eccentric compression short column strengthened by ultra-high-performance fibre-reinforced concrete	508-522
Men, Jinjie / Xiong, Liquan / Wang, Jiachen / Zhang, Qian / He, Pengjie	An experimental study on the seismic behavior and replaceability of the replaceable steel shear links	2334-2348
Ma, Wei / Xu, Kai / Cheng, Baoquan / Zhang, Yonggang / Chen, Rui / Chen, Dong	Experimental study on the seismic behavior of a new single-faced superposed shear wall with the concealed column	4446-4460
Ferrier, E. / Michel, L. / Ngo, M. D.	Experimental study on the shear behavior of RC beams reinforced by natural composite materials (flax fibers)	637-654
Zakir, Mohammad / Sofi, Fayaz A. / Naqash, Javed A.	Experimentally verified behavior and confinement model for concrete in circular stiffened FRP-concrete-steel double-skin tubular columns	1144-1157
Dong, Xiaonong / Dou, Tiesheng / Cheng, Bingqing / Zhao, Lijun	Failure analysis of a prestressed concrete cylinder pipe under clustered broken wires by FEM	3284-3297
Xue, Songling / Shen, Ruili / Xue, Huajuan / Zhu, Xiaoxiong / Wu, Qiong / Zhang, Sheng	Failure analysis of high-strength steel wire under random corrosion	720-727
Jia, Mingming / Gao, Shan / Fu, Feng / Yang, Ning	Failure mechanism and seismic performance evaluation of steel frame using rocking truss	1180-1192
Alshaikh, Ibrahim M. H. / Bakar, B. H. Abu / Alwesabi, Emad A. H. / Zeyad, Abdullah M. / Magbool, Hassan M.	Finite element analysis and experimental validation of progressive collapse of reinforced rubberized concrete frame	2361-2373
Gunawardena, Yasoja / Aslani, Farhad	Finite element modelling of concrete-filled spiral-welded stainless-steel tube columns under concentric and eccentric axial loading	1119-1143
Tzouka, E. / Karavasilis, T. / Kashani, M. M. / Afshan, S.	Finite element modelling of push-out tests for novel locking nut shear connectors	1020-1032
Abid, Sallal R. / Tayşi, Nildem / Özakça, Mustafa / Xue, Junqing / Briseghella, Bruno	Finite element thermo-mechanical analysis of concrete box-girders	2424-2444
Yang, Dongdong / Liu, Faqi / Huang, Shan-Shan / Yang, Hua	Fire performance of eccentrically-loaded square and rectangular tubed-reinforced-concrete columns	1053-1076
Gedam, Banti A.	Fire resistance design method for reinforced concrete beams to evaluate fire-resistance rating	855-877
Rúa, Erik / Cabaleiro, Manuel / Conde, Borja / Riveiro, Belén	First results of a methodology to obtain a 1D variable geometry model for the structural analysis of corroded steel beams from the point cloud	3257-3268
Tariq, Faraz / Bhargava, Pradeep	Flexural behaviour of corroded RC beams exposed to fire	1366-1375
Christidis, K. I. / Badogiannis, E. G. / Mintzoli, C.	Flexural behaviour of pumice lightweight concrete reinforced with end-hooked steel fibres	3835-3847
Murad, Yasmin / Tarawneh, Ahmad / Arar, Fares / Al-Zu'bi, Amr / Al-Ghwairi, Abdullah / Al-Jaafreh, Ahmad / Tarawneh, Mohammad	Flexural strength prediction for concrete beams reinforced with FRP bars using gene expression programming	3163-3172
Murad, Yasmin / Abu-AlHaj, Tareq	Flexural strengthening and repairing of heat damaged RC beams using continuous near-surface mounted CFRP ropes	451-462
Kumaraguru, Selvakumarasami / Alagusundaramoorthy, Paramasivan	Flexural strengthening of steel beams using pultruded CFRP composite sheets with anchorage mechanisms	1414-1427
Mashhadi, Sima / Homaei, Farshad / Asadi, Azita / Tajammolian, Hamed	Fragility analysis of steel MRFs: Effects of frequency-content components of near-fault pulse-like ground motions and setbacks	3655-3666
Khan, Mustesin Ali / Khan, Aatif Ali / Anwar, Ghazanfar Ali / Usmani, Asif	Framework for fire risk assessment of bridges	523-532
Zain, Muhammad / Usman, Muhammad / Farooq, Syed Hassan	A Framework with reduced computational burden for Seismic Fragility Assessment of Reinforced Concrete Buildings in High-Intensity Seismic Zones	3055-3065
Mishra, Biraja Prasad / Barik, Manoranjan	Free flexural vibration of thin stiffened plates using NURBS-Augmented finite element method	1620-1632
Khodabakhshpour-Bariki, Samira / Jafari-Talookolaei, Ramazan-Ali / Attar, Mostafa / Eyvazian, Arameh	Free vibration analysis of composite curved beams with stepped cross-section	4828-4842
Sun, Yue / Ye, Wangjie / Chen, Yao / Fan, Weiying / Feng, Jian / Sareh, Pooya	Geometric design classification of kirigami-inspired metastructures and metamaterials	3633-3643
Xu, Chengxiang / Guo, Can / Xu, Qiqi / Yang, Zhao	The global collapse resistance capacity of a seismic-damaged SRC frame strengthened with an enveloped steel jacket	3433-3442
Dunant, Cyrille F. / Drewniok, Michał P. / Orr, John J. / Allwood, Julian M.	Good early stage design decisions can halve embodied CO2 and lower structural frames’ cost	343-354
Zhang, Wen-Ming / Yang, Chao-yu / Chang, Jia-Qi / Li, Dong-min / Liu, Zhao	Gravity stiffness of a three-tower suspension bridge: Analytical solution via double-span bridge reduction to a single-span one with elastic constraints	2198-2207
Azad, Saeid Kazemzadeh / Aminbakhsh, Saman	High-dimensional optimization of large-scale steel truss structures using guided stochastic search	1439-1456
Shamkhi Al-Ghazali, Anwar / Shariatmadar, Hashem	Hybrid active control of adjacent buildings interconnected by viscous dampers utilizing type-2 fuzzy controller considering soil-structure interaction	292-306
Mudhaffar, Ismail M. / Tounsi, Abdelouahed / Chikh, Abdelbaki / Al-Osta, Mohammed A. / Al-Zahrani, Mesfer M. / Al-Dulaijan, Salah U.	Hygro-thermo-mechanical bending behavior of advanced functionally graded ceramic metal plate resting on a viscoelastic foundation	2177-2189
Zhang, Jianwei / Liu, Juan / Li, Xiangyu / Cao, Wanlin / Chen, Zeqiao	Hysteretic behavior of steel fiber-reinforced high-strength concrete columns with high-strength steel bars	1833-1852
Ni, Xiangyong	Hysteretic behavior of T-shaped walls reinforced by high-strength bars: Cyclic loading tests and modelling	1376-1393
Xue, Weichen / Hu, Xinyu / Ren, Dongsheng / Hu, Xiang	Hysteretic performance of precast beam-column connections fabricated with high-strength materials	4568-4578
Abraik, Emad / Assaf, Jamal	Impact of ground motion duration on concrete shear walls reinforced with different types of shape memory alloy rebars	2739-2754
Dahal, Prabodh / Mullen, Chris	Incorporation of post-earthquake fire (PEF) and subsequent aftershock for performance analysis of steel buildings	3810-3821
Bhattacharjee, Tanumoy / Chanda, Diptesh / Saha, Rajib	Influence of soil flexibility and plan asymmetry on seismic behaviour of soil-piled raft-structure system	1775-1788
Wei, Biao / Fu, Yunji / Li, Shanshan / Jiang, Lizhong	Influence on the seismic isolation performance of friction pendulum system when XY shear keys are sheared asynchronously	1908-1922
Zhang, Wenying / Xu, Xiangzhi / Zheng, Yu / Wang, Shuangshuang / Li, Yuanqi	Influencing factors analysis on shear capacity of cold-formed steel light frame shear walls	3588-3604
Yu, Jin-Guang / Cheng, Liang / Liu, Shu / Fu, Bing / Li, Bo	Inorganic adhesive based near-surface-mounted fibre reinforced polymer for strengthening of concrete structures: An overview	2099-2120
Li, Shanshan / Xiang, Ping / Wei, Biao / Zuo, Chengjun / Jiang, Lizhong / He, Weikun	Interface friction effects on scaling a vertical spring-viscous damper isolation system in a shaking table test	1878-1891
Bavandi, Mohammad / Moghadam, Abdolreza S. / Mansoori, Mohammad Reza / Aziminejad, Armin	Introducing a new seismic efficiency index of post-tensioned self-centering steel moment connections	463-483
Broujerdian, Vahid / Ghamari, Ali / Abbaszadeh, Alireza	Introducing an efficient compound section for steel shear wall using flat and corrugated plates	2855-2871
Garmeh, Vandad / Akbarpour, Abbas / Adibramezani, Mohammadreza / Hojat Kashani, Ata / Adibi, Mahdi	Introducing and numerical study of an innovative rotational damper with replaceable hourglass steel pins	2019-2035
Siami Kaleybar, Reza / Tehrani, Payam	Investigating seismic behavior of horizontally curved RC bridges with different types of irregularity in comparison with equivalent straight bridges	2570-2586
Chaboki, Mahsa / Heshmati, Mahdi / Aghakouchak, Ali Akbar	Investigating the behaviour of steel framed-tube and moment-resisting frame systems exposed to fire	1802-1818
Zhu, Qiankun / Yang, Wenbin / Du, Yongfeng / Živanović, Stana	Investigation of a vibration mitigation method based on crowd flow control on a footbridge	1495-1509
Mustafa, Samim / Yoshida, Ikumasa / Sekiya, Hidehiko	An investigation of bridge influence line identification using time-domain and frequency-domain methods	2061-2065
Yeboah, David / Gkantou, Michaela	Investigation of flexural behaviour of structural timber beams strengthened with NSM basalt and glass FRP bars	390-405
Öksüzer, Nurullah / Anil, Özgür / Aldemir, Alper / Şahmaran, Mustafa	Investigation of mechanical properties of high-performance hybrid fiber concretes adding nanomaterials using with coarse aggregate	2893-2902
Sophianopoulos, Dimitrios S. / Ntina, Maria I.	Investigation of the seismic performance of a single story – Single bay special truss moment frame with SMAs incorporated	2374-2387
Yu, Pan / Yang, Qingshan / Law, Siu-seong	Lateral behavior of heritage timber frames with loose nonlinear mortise-tenon connections	581-592
Miri, Amin / Thambiratnam, David / Weston, Bill / Chan, T. H. T. / Dhanasekar, Manicka	Lateral stability of CWR tracks in transition zones of open-deck steel bridges	897-915
Xiong, Gang / Feng, Yong / Peng, Qi / Kang, Shao-Bo / Zhang, Yue / Fan, Yi-Li	Lateral-torsional buckling behaviour of 690 MPa high strength steel beams	3999-4010
Wang, Xin / Chen, Zhiyuan / Ding, Lining / Shi, Yuwei / Zhu, Zhongguo / Wu, Zhishen	Long-term flexural behavior of concrete beams with hybrid FRP and steel reinforcements in simulated marine environment	4556-4567
Xing, Jihui / Wang, Yuting / Hizb, Ullah Sajid / Chen, Aiguo / Yang, Na	Low cycle fracture behavior of steel members with circular hollow section subjected to eccentric load	4269-4285
Fan, Weiying / Chen, Yao / Li, Jiaqiang / Sun, Yue / Feng, Jian / Hassanin, Hany / Sareh, Pooya	Machine learning applied to the design and inspection of reinforced concrete bridges: Resilient methods and emerging applications	3954-3963
Feng, Xue / Wang, Boxin / Qian, Yongmei / Tian, Wei	Macro-meso failure characteristics of corn straw biomass integrated material columns with different integration methods under axial compression	3486-3494
Pantò, Bartolomeo / Malena, Marialaura / de Felice, Gianmarco	A macro-modelling approach for arches strengthened with externally bonded inorganic matrix composites	4299-4312
Khalilzadehtabrizi, Sahand / Seifiasl, Afshar / Asl, Masoud Hoseinzadeh	Measurement of deformation patterns in steel plate shear walls subjected to cyclic loading based on multi-target digital image correlation (MT-DIC)	2611-2627
Wei, Yuan / Wu, Zhaoqi / Wang, Xintao / Jiang, Shao-Fei	Mechanical behavior of locally corroded circular steel tube under compression	776-791
Wang, Tianlong / Zhang, Xun'an / Li, Kun / Yang, Shixuan	Mechanical performance analysis of a piezoelectric ceramic friction damper and research of its semi-active control strategy	1510-1531
Yu, Yang / Cao, Zhenggang / Sun, Ying	Mechanical properties of four types of PVC-coated woven fabrics at high-temperature and after exposure to high-temperature	830-840
Sun, Guojun / Wu, Mingze / Yang, Yuan / Xue, Suduo	Mechanical properties of radial spherical plain bearing (RSPB) joint with an inserted plate for building structural application – An experimental study	2140-2151
Luo, Huan / Paal, Stephanie German	Metaheuristic least squares support vector machine-based lateral strength modelling of reinforced concrete columns subjected to earthquake loads	748-758
Datta, Gaurav / Bhattacharjya, Soumya / Chakraborty, Subrata	A metamodeling-based robust optimisation approach for structures subjected to random underground blast excitation	3615-3632
Hilali, Youssef / Bourihane, Oussama	A mixed MLS and Hermite-type MLS method for buckling and postbuckling analysis of thin plates	2349-2360
Yi, Jiang / Li, Jianzhong	Modelling of stay cables with large earthquake-induced force variations in cable-stayed bridges	627-636
Gómez-Martínez, Roberto / Sánchez-García, Raúl / Escobar-Sánchez, José A. / Arenas-García, Luis M. / Mendoza-Salas, Marco A. / Rosales-González, Oscar N.	Monitoring two cable-stayed bridges during load tests with fiber optics	4344-4358
Ponsi, Federico / Bassoli, Elisa / Vincenzi, Loris	A multi-objective optimization approach for FE model updating based on a selection criterion of the preferred Pareto-optimal solution	916-934
Ding, Hao / Wang, Jin-Ting / Altay, Okyay / Lu, Li-Qiao	Multilayer toroidal tuned liquid column dampers for seismic vibration control of structures	406-422
Alembagheri, M. / Sharafi, P. / Rashidi, M. / Bigdeli, A. / Farajian, M.	Natural dynamic characteristics of volumetric steel modules with gypsum sheathed LSF walls: Experimental study	272-282
Khorramian, Koosha / Sadeghian, Pedram	New mechanics-based confinement model and stress–strain relationship for analysis and design of concrete columns wrapped with FRP composites	2659-2674
Zhang, Yujian / Luo, Yongfeng / Guo, Xiaonong / Li, Yunsong / Huang, Qinglong	A new seismic damage assessment method for single-layer steel latticed shells considering multi-modal contribution	4670-4689
Qi, Dongchun / Chen, Xinghua / Zhu, Yiwen / Zhang, Qi	A new type of wind-resistance cable net for narrow suspension bridges and wind-resistance cable element for its calculation	4243-4255
de Oliveira Neto, Luttgardes / Masia, Mark John / Almeida, Valério S. / Simonetti, Hélio Luiz	A nonlinear BE formulation for analysis of masonry walls considering orthotropy: Fundamentals	3944-3953
Mohammadzadeh, Behzad / Kang, Young Jong / Kim, Seungjun / Cabral-Pinto, Marina MS / Nejad, Zahra Derakhshan	Nonlinear dynamic investigation of plates: Considering seismic loads, strain rate, material, and geometrical nonlinearities	1967-1986
Wang, Feiliang / Han, Yan / Yang, Jian	Nonlinear FE analysis on stiffness and resistance of bolted cold-formed steel built-up joints	2520-2533
Wang, Weian / Yi, Zhihong / Tian, Bo / Zhang, Yingda / Lu, Siji	Nonlinear finite element analysis of PBL shear connectors in hybrid structures	4642-4654
Mazza, Fabio / Mazza, Mirko	Nonlinear modelling of HDRBs in the seismic analysis of retrofitted and new base-isolated r.c. buildings	4148-4161
Liu, Hua / Zhao, Jian / Davis, Todd	Novel adhesive anchoring system through engineered adhesive-concrete interface	947-956
Ahmadi, Hamid Reza / Mahdavi, Navideh / Bayat, Mahmoud	A novel damage identification method based on short time Fourier transform and a new efficient index	3605-3614
Roberts, M. J. / Davies, J. M. / Wang, Y. C.	Numerical analysis of a clad portal frame structure tested to destruction	3779-3797
Zhang, Youyou / Chai, Y. H.	Numerical analysis of bridge deck rehabilitation by ultra-high-performance concrete (UHPC) overlay	4791-4802
Lian, Jun-Yi / Deng, En-Feng / He, Jin-Ming / Cai, Li-Ming / Gao, Shu-Cai / Zhou, Ji-Jian	Numerical analysis on seismic performance of corner fitting connection in modular steel building	1659-1676
Gorji Azandariani, Mojtaba / Rousta, Ali Mohammad / Mohammadi, Masoud / Rashidi, Maria / Abdolmaleki, Hamid	Numerical and analytical study of ultimate capacity of steel plate shear walls with partial plate-column connection (SPSW-PC)	3066-3080
Khan, Kashan / Chen, Zhihua / Liu, Jiadi / Khan, Arsalan	Numerical and parametric analysis on compressive behaviours of continuous-supported wall systems in MSB	4053-4079
Li, Yanfeng / Zhao, Jihe / Bao, Longsheng / Dong, Lei / Wang, Qinghe	Numerical and theoretical analysis of spatial shear lag effect in through wide box bowstring arch bridge main girder	141-151
Lin, Shu-Chao / Song, Jia / Gao, Shan / Guo, Jun-Ping / Zhou, Yi-Jun / Wang, Yuan-qing	Numerical simulation and field test studies on mechanical behavior of steel plate girder strengthened by external prestressed tendon	3188-3201
Gholizadeh, Mohammad Reza / Safakhah, Soroush	Numerical simulation of application effect of FRP on torsional-flexural behavior of RC columns	1721-1733
Truong, Quang-Tri / Phan, Duc-Huynh	Numerical study of aeroelastic suppression using active control surfaces on a full-span suspension bridge	606-614
Sachidananda, Khwairakpam / Singh, Konjengbam Darunkumar	Numerical study of fixed ended Lean duplex stainless steel (LDSS) flat oval hollow stub column with square perforation under pure axial compression	3691-3712
Sheibani, M. / Ghorbani-Tanha, A. K.	Obtaining mass normalized mode shapes of motorway bridges based on the effect of traffic movement	2253-2263
Nejad, Reza Masoudi / Berto, Filippo / Wheatley, Greg / Tohidi, Mohammadreza / Ma, Wenchen	On fatigue life prediction of Al-alloy 2024 plates in riveted joints	1715-1720
Casagrande, Daniele / Fanti, Riccardo / Greco, Marco / Gavric, Igor / Polastri, Andrea	On the distribution of internal forces in single-storey CLT symmetric shear-walls with openings	4718-4742
Jalili, Shahin / Khani, Reza / Hosseinzadeh, Yousef	On the performance of flax fibres in multi-objective design of laminated composite plates for buckling and cost	3094-3106
Nabi, Junaid / Rahim, A. Abdul	On the possibility of using damaged plasticity models in the assessment of structural response of gravity beams	1987-2002
Kaveh, Ali / Biabani Hamedani, Kiarash / Joudaki, Ali / Kamalinejad, Mohammad	Optimal analysis for optimal design of cyclic symmetric structures subject to frequency constraints	3122-3136
Babaei, Samira / Amirabadi, R. / Sharifi, M. / Ventura, C.	Optimal probabilistic seismic demand model for fixed pile-founded offshore platforms considering soil-pile-structure interaction	4330-4343
Zheng, Yanfeng / Zhang, Jingyao / Ohsaki, Makoto / Wan, Hua-Ping / Yang, Chao / Luo, Yaozhi	Optimization of the rod forces in the reticular support structure of JUNO central detector	1645-1658
Carbas, Serdar / Artar, Musa	Optimum design of cold-formed steel frames via five novel nature-inspired metaheuristic algorithms under consideration of seismic loading	4011-4030
Talatahari, Siamak / Jalili, Shahin / Azizi, Mahdi	Optimum design of steel building structures using migration-based vibrating particles system	1394-1413
Türkmen, Ö. S. / De Vries, B. T. / Wijte, S. N. M. / Ingham, J. M.	Out-of-plane behaviour of clay brick masonry walls retrofitted with flexible deep mounted CFRP strips and additional single-sided FRCM overlay	2459-2474
Pradhan, Bharat / Zizzo, Maria / Sarhosis, Vasilis / Cavaleri, Liborio	Out-of-plane behaviour of unreinforced masonry infill walls: Review of the experimental studies and analysis of the influencing parameters	4387-4406
Nazari, A. R. / Taheri, F.	A parametric study into the influence of strain hardening slope on the stability and collapse responses of steel tubes under compressive loading	2152-2165
Mohammed Riyadh, Miah / Hedayati-Dezfuli, Farshad / Shahria Alam, M.	Parametric study on the vertical operational characteristics of carbon fiber reinforced elastomeric isolators using Taguchi approach	2974-2989
Kalateh-Ahani, Mohsen / Amiri, Saeed	A Park-Ang damage index-based framework for post-mainshock structural safety assessment	820-829
Pérez Sifre, Sergi / Lenner, Roman	Partial factors and reliability verification for the site load factor approach for the assessment of existing bridges	307-317
Chen, Jianyun / Jia, Qibin / Xu, Qiang / Fan, Shuli / Liu, Pengfei	The PDEM-based time-varying dynamic reliability analysis method for a concrete dam subjected to earthquake	2964-2973
Güler, Elif / Alhan, Cenk	Performance limits of base-isolated liquid storage tanks with/without supplemental dampers under near-fault earthquakes	355-367
Pang, Bo / Wang, Feiliang / Yang, Jian / Nyunn, Sandy / Azim, Iftikhar	Performance of slabs in reinforced concrete structures to resist progressive collapse	4843-4856
Moghaddam, Hassan / Hajirasouliha, Iman / Hosseini Gelekolai, Seyed Mojtaba	Performance-based seismic design of moment resisting steel frames: Adaptive optimisation framework and optimum design load pattern	1690-1704
Choudhary, Rakesh / Gupta, Rajesh / Alomayri, Thamer / Jain, Abhishek / Nagar, Ravindra	Permeation, corrosion, and drying shrinkage assessment of self-compacting high strength concrete comprising waste marble slurry and fly ash, with silica fume	971-985
Semsarha, Hossein / Tehrani, Payam / Behnam, Behrouz	Post-earthquake progressive failure resistance of steel frames under column-removal scenarios	1544-1560
Tayebi, Morteza / Nematzadeh, Mahdi	Post-fire flexural performance and microstructure of steel fiber-reinforced concrete with recycled nylon granules and zeolite substitution	2301-2316
Liu, Y. Q. / Liang, F. / Au, Francis T. K.	Precast segmental bridge columns with resettable sliding joints —— An inspiration from ancient Chinese pagodas	615-626
Shao, Yuefeng / Brownjohn, J. M. W. / Miao, Changqing / Wang, Miaomin	A precise time-integration linear vehicle-bridge interaction method and dynamic sensitivity analysis	4596-4603
Milovancevic, Milos / Denić, Nebojša / Cirkovic, Bogdan / Nešić, Zoran / Paunović, Marija / Stojanović, Jelena	Prediction of shear debonding strength of concrete structure with high-performance fiber reinforced concrete	4475-4480
Liao, Qiao / Li, Lingzhi / Li, Bixiong / Yu, Jiangtao	Prediction on the flexural deflection of ultra-high strength rebar reinforced ECC beams at service loads	246-258
Karami, Behnam / Shishegaran, Aydin / Taghavizade, Hamed / Rabczuk, Timon	Presenting innovative ensemble model for prediction of the load carrying capacity of composite castellated steel beam under fire	4031-4052
Behboodi, Saeed / Bitaraf, Maryam / Nafisifard, Mohammad	Prevention of low-cycle fatigue damage using adaptive control approach and magnetorheological dampers	554-566
Răcănel, Ionuţ-Radu / Urdăreanu, Vlad Daniel	Probabilistic estimation of the strength capacity of existing concrete bridges	769-775
Sadeghi, Abbasali / Kazemi, Hamid / Samadi, Maysam	Probabilistic seismic analysis of steel moment-resisting frame structure including a damaged column	187-200
Bai, Lunhua / Shen, Ruili / Yan, Quansheng / Wang, Lu / Miao, Rusong / Zhao, Yinghao	Progressive-models method for evaluating interactive stability of steel box girders for bridges – Extension of progressive collapse method in ship structures	3848-3861
Chen, Wenwen / Shao, Zhushan / Wei, Wei / Zhang, Pengju / Hong, Yong	Properties of concrete incorporating microwave treated coarse aggregate: An experimental study	693-702
Tian, Yuji / Guan, Haiwei / Shao, Shuai / Yang, Qingshan	Provisions and comparison of Chinese wind load standard for roof components and cladding	2587-2598
Zhou, Li / Huang, Yong / Chen, Bo	Punching shear behavior of slab–column connections embedded with steel skeletons	2879-2892
Al-Gasham, Thaar S. / Mhalhal, Jasim M. / Abid, Sallal R.	Quasi-static analysis of biaxial voided slabs with openings	4176-4192
Kim, JunSu / Cho, Yonghyun / Kim, TaeSoo	Recommendation on block shear strength equation of double shear four-bolted connection in cold-formed mild carbon steel	3713-3735
Yu, Xiang / Wang, Yuke / Tulamaiti, Yunusijiang / Zhou, Chenguang / Zhou, Yang / Wang, Gan	Refined numerical simulation of a concrete cut-off wall in the thick overburden of dam foundation	4407-4420
Ding, Faxing / Xiong, Shuning / Zhang, Haiyang / Li, Gang / Zhao, Pengzhou / Xiang, Ping	Reliability analysis of axial bearing capacity of concrete filled steel tubular stub columns with different cross sections	4193-4202
Tian, Panpan / Qiu, Hongxing / Liang, Zhouzhou / Sun, Jian	Reliability analysis of the improved four-level assessment standardization for bearing capacity of timber components	318-329
Men, Jinjie / Deng, DePing / Lan, Tao / Xiong, Liquan / Ren, RuYue	Replaceability evaluation method of shear link for RCS hybrid frame	2085-2098
Lin, Bintian / Zhang, Qingwen / Fan, Feng / Shen, Shizhao	Reproducing vertical human walking loads on rigid level surfaces with a damped bipedal inverted pendulum	1789-1801
Tokgoz, Serkan / Dündar, Cengiz / Karaahmetli, Sedat / Ozel, Ruken	Research on concrete-filled stainless steel tubular composite columns	703-719
Fan, Shenggang / Mo, Haibo / Ding, Zhixia / Zeng, Shaoru / Jiang, Qinglin	Research on local buckling capacity of lipped C-section stainless steel beams under weak axis bending	3570-3587
Xu, Zhonggen / Zhao, Yatao / Deng, Changgen / Li, Qing	Research on seismic isolation of truss string structure with rubber bearings considering relative rotation	1428-1438
Wang, Xinwei / Zhang, Xun'an / Shahzad, Muhammad Moman / Shi, Xiangyu	Research on the disaster prevention mechanism of mega-sub controlled structural system by vulnerability analysis	4481-4491
Zhong, Changjun / Shen, Ruili / Wang, Hui	Research on ultimate bearing capacity state and structure optimization of main cable saddle	28-40
Kagioglou, Panagiota / Katakalos, Konstantinos / Mitoulis, Stergios Aristoteles	Resilient connection for accelerated bridge constructions	3025-3039
Mohammadi Darani, Farhad / Zarnani, Pouyan / Veismoradi, Sajad / Yousef-beik, Seyed Mohamad Mahdi / Hashemi, Ashkan / Quenneville, Pierre	Resilient slip friction joint performance: Component analysis, spring model and anti-locking mechanism	3897-3911
Dwivedi, R. / Vyavahare, A. Y.	Review: Web crippling behavior of cold-formed beam sections	4629-4641
Baraldi, Daniele / Milani, Gabriele / Sarhosis, Vasilis	A Rigid-Beam-Model for studying the dynamic behaviour of cantilever masonry walls	2950-2963
Li, Xin / Ashraf, Mahmud / Subhani, Mahbube / Kremer, Paul / Li, Haitao / Anwar-Us-Saadat, Mohammad	Rolling shear properties of cross-laminated timber (CLT) made from Australian Radiata Pine – An experimental study	423-432
Gholhaki, Majid / Eshrafi, Behrouz / Gorji Azandariani, Mojtaba / Rezaifar, Omid	Seismic assessment of linked-column frame structural system considering soil-structure effects	2264-2272
Wang, Kun / Luo, Huihui / Guo, Kai / Zhou, Jun / Ma, Hongwei	Seismic collapse resistance performance on out-jacketing frames with concrete-encased CFST columns for adding storeys	41-53
Imanpour, Ali	Seismic design of columns in two-story steel concentrically braced frames with bracing members intersecting columns between floors	3885-3896
Yazdanian, Mohsen / Ingham, Jason / Sadashiva, Vinod / Cutfield, Matthew / Kahanek, Christopher / Dizhur, Dmytro	Seismic fragility curves for stainless-steel wine storage tanks	4766-4780
Salkhordeh, M. / Govahi, E. / Mirtaheri, M.	Seismic fragility evaluation of various mitigation strategies proposed for bridge piers	1892-1905
Ahmed, Benazir F. / Dasgupta, Kaustubh	Seismic limit states for reinforced concrete bridge pile in sand	128-140
Landolfo, Raffaele / Campiche, Alessia / Iuorio, Ornella / Fiorino, Luigi	Seismic performance evaluation of CFS strap-braced buildings through experimental tests	3040-3054
Ma, Shaochun / Gu, Yu / Bao, Peng	Seismic performance of ceramsite concrete T-shaped composite wallboard joints under cyclic loading	4433-4445
Xin, Guangtao / Xu, Weibing / Wang, Jin / Yan, Xiaoyu / Chen, Yanjiang / Yan, Weiming / Li, Jianguo	Seismic performance of fabricated concrete piers with grouted sleeve joints and bearing-capacity estimation method	169-186
Jiang, Huanjun / Huang, Youlu / He, Liusheng / Huang, Tian / Zhang, Shaojing	Seismic performance of RC frame-shear wall structures with vertical setback	4203-4217
Moghaddam, Hassan / Sadrara, Ali / Jalali, Seyyed Reza	Seismic performance of stainless-steel built-up box columns subjected to constant axial loads and cyclic lateral deformations	4080-4095
Di Sarno, Luigi / Karagiannakis, George	Seismic performance-based assessment of a RC pipe rack accounting for dynamic interaction	4604-4615
Chen, Zhi-Qiang / Zheng, Shi-Xiong / Zhang, Jin / Jia, Hongyu	Seismic reliability analysis of high-pier railway bridges with correlated random parameters via an improved maximum entropy method	4538-4555
Huang, Caigui / Huang, Surong	Seismic resilience assessment of aging bridges with different failure modes	3682-3690
He, Chang / Wei, Miaomiao / Xie, Qiang / Jiang, Lizhong	Seismic responses of bundled conductor interconnected electrical equipment	3107-3121
Dutta, Sekhar Chandra / Halder, Lipika / Sharma, Richi Prasad	Seismic vulnerability assessment of low to mid-rise RC buildings addressing prevailing design and construction practices in the Northeastern region of the Indian subcontinent: A case study based approach	1561-1577
Saygılı, Özden / Lemos, José V.	Seismic vulnerability assessment of masonry arch bridges	3311-3323
Kookalani, Soheila / Cheng, Bin / Xiang, Sheng	Shape optimization of GFRP elastic gridshells by the weighted Lagrange ε-twin support vector machine and multi-objective particle swarm optimization algorithm considering structural weight	2066-2084
Yousefi, Amir M. / Samali, Bijan / Yu, Yang	Shear behaviour and design of cold-formed ferritic stainless steel channels with circular web openings	4162-4175
Yan, Zhao / Cheng, Yu / Shicai, Chen / Ziqin, Jiang / Wenying, Zhang	Shear performance of cold-formed steel shear walls with high-aspect-ratios	1193-1206
Dang, Tung D. / Tran, Duong T. / Nguyen-Minh, Long / Nassif, Ayman Y.	Shear resistant capacity of steel fibres reinforced concrete deep beams: An experimental investigation and a new prediction model	2284-2300
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar / Lau, Hieng Ho	Sheathing-fastener connection strength based design method for sheathed CFS point-symmetric wall frame studs	1473-1494
Ziaja, Dominika / Nazarko, Piotr	SHM system for anomaly detection of bolted joints in engineering structures	3877-3884
Bai, Jiulin / Zhang, Jianyuan / Jin, Shuangshuang / Wang, Yu-Hang	A simplified computational model for seismic performance evaluation of steel plate shear wall-frame structural systems	1677-1689
Sharma, S. / Tomassetti, U. / Graziotti, F. / Magenes, G.	Simplified methodologies for assessing the out-of-plane two-way bending seismic response of unreinforced brick masonry walls: lessons from recent experimental studies	2839-2854
Amoussou, Cossi Prosper Dagbo / Lei, Honggang / Alhaddad, Wael / Halabi, Yahia	Simplified modeling and analysis method for skyscrapers with outrigger system	1033-1050
Atmaca, Barbaros	Size and post-tensioning cable force optimization of cable-stayed footbridge	2036-2049
Awad, Rafiq	Sizing optimization of truss structures using the political optimizer (PO) algorithm	4871-4894
Tidhar, N. / Li, Y. / Kristombu Baduge, K. S. / Mendis, P. / Thilakarathna, P. S. M. / Chandrathilaka, E. R. K.	A Slack approach to optimised modularisation of prefabricated structures using a multi-variable modularisation index	1235-1251
Reyes-Salazar, Alfredo / Bojórquez, Edén / Bojórquez, Juan / Llanes-Tizoc, Mario D. / Gaxiola-Camacho, J. Ramon / Valenzuela-Beltrán, Federico	Some issues regarding the models of the mass and damping matrices in nonlinear seismic analysis of moment resisting steel frames	12-27
Song, Liang-long / Shi, Xin / Guo, Tong	SSI effects on the inelastic displacement ratios of flag-shaped hysteretic SDOF systems	113-127
Alsayed, Motasem / Lin, Lan / Hassan, Jassim	Static behavior of partially earth-anchored cable-stayed bridge of different side-to-main span ratios: super-long span system with crossing cables	3736-3745
Tan, Yilinke / Zhang, Yu / Zhang, Qingwen / Fan, Feng	Static properties and stability of super-long span aluminum alloy mega-latticed structures	3173-3187
Qu, Songzhao / Sun, Qing / Yuan, Jun	Stiffness and ultimate strength of tube-gusset plate joints with ring stiffener plate	3862-3876
Ye, Yong / Liu, Yang / Guo, Zi-Xiong / Chicchi, Rachel	Stone prism encased concrete-filled steel tube columns subjected to axial compression	1853-1867
Gašić, Vlada / Arsić, Aleksandra / Zrnić, Nenad	Strength of extended stiffened end-plate bolted joints: Experimental and numerical analysis	77-89
Chen, Gaoxiang / Fan, Jiang / Dong, Shaojing / Liu, Daxiang	Strength uncertainty analysis of composite turbine blade with small sample size	1158-1179
Zavvar, Esmaeil / Hosseini, Alireza Sadat / Lotfollahi-Yaghin, Mohammad Ali	Stress concentration factors in steel tubular KT-connections with FRP-Wrapping under bending moments	4743-4765
Tariq, Faraz / Bhargava, Pradeep	Stress–strain curves and mechanical properties of corrosion damaged super ductile reinforcing steel	1532-1543
Naqash, Muhammad Tayyab / Formisano, Antonio / Farsangi, Ehsan Noroozinejad	Structural assessment of glass used in façade industry	4817-4827
Farzampour, Alireza	Structural behavior prediction of the Butterfly-shaped and straight shear fuses	3964-3972
Tafsirojjaman, T. / Fawzia, Sabrina / Thambiratnam, David P.	Structural behaviour of CFRP strengthened beam-column connections under monotonic and cyclic loading	2689-2699
Pham, Dao Quang / Nguyen, Tuan Ngoc / Le, Son Tay / Pham, Tung Thanh / Ngo, Tuan Duc	The structural behaviours of steel reinforced geopolymer concrete beams: An experimental and numerical investigation	567-580
Razavi, Mojtaba / Hadidi, Ali	Structural damage identification through sensitivity-based finite element model updating and wavelet packet transform component energy	4857-4870
Bolourani, Anahita / Bitaraf, Maryam / Nekouvaght Tak, Ala	Structural health monitoring of harbor caissons using support vector machine and principal component analysis	4501-4513
Zhou, Hongyuan / Zhang, Guangcai / Wang, Xiaojuan / Ni, Pinghe / Zhang, Jian	Structural identification using improved butterfly optimization algorithm with adaptive sampling test and search space reduction method	2121-2139
Shi, Fan / Wang, Dongsheng / Chen, Lei	Study of flexural vibration of variable cross-section box-girder bridges with corrugated steel webs	1107-1118
Jian, Xiangyang / Liu, Haiqing / Zhao, Zhongwei / Wu, Xiufeng / Lei, Ming / Chen, Zimu	A study of the mechanical behavior of rectangular steel tubular column strengthened using intermittent welding angle steel	3298-3310
Farajiani, Farhad / Nekooei, Masoud / Mansoori, Mohammad Reza	Study of vertical mass isolation structures equipped with metallic dampers with a focus on the position of stiff subsystem	2824-2838
Zhang, Xiuhua / Zhang, Enyuan / Li, Chaoran	Study on axial compression mechanical behavior of cold-formed thin-walled C-shaped steel composite wall sheathed with straw board on both sides	3746-3756
Zhong, Hanqing / Lyu, Liang / Yu, Zhixiang / Liu, Chun	Study on mechanical behavior of rockfall impacts on a shed slab based on experiment and SPH–FEM coupled method	1283-1298
Huang, Yong / Wang, Junjie / Le, Weijie / Zhang, Liang / Su, Junsheng	Study on mechanical behaviours of rail fasteners and effects on seismic performance of urban rail viaduct	3822-3834
Li, Beibei / Wang, Jingfeng / Wang, Yuanqing	Subassemblage test and gusset rotation response of buckling-restrained braced steel frames	3417-3432
Liu, Yongqian / Tao, Tao / Zhao, Xingyu / Zhang, Ce / Ma, Yuanchi	Support vector regression-based fatigue damage assessment method for wind turbine nacelle chassis	759-768
He, Zhi-Qi / Ma, Zeng / Zhang, Shixiang / Liu, Zhao / Ma, Zhongguo John	Temperature gradients and stress distributions in concrete box-girder bridges during hot-mix asphalt paving	1954-1966
Tariq, Faraz / Bhargava, Pradeep	Temperature-dependent properties of corroded super ductile TMT steel bars	4124-4140
Maji, Pabitra / Rout, Mrutyunjay / Karmakar, Amit	The thermo-elastic vibration of graphene reinforced composite stiffened plate with general boundary conditions	99-112
Zhang, Zejun / Liu, Yongjian / Liu, Jiang / Zhang, Ning	Thermo-mechanical behavior simulation and cracking risk evaluation on steel-concrete composite girders during hydration process	3912-3928
Tsiatas, George C. / Pavlovic, Milija N.	Thin rectangular plates under axial point loading: Accuracy of the classical single Fourier series solution for stresses	3757-3764
He, Zhi-Qi / Hong, Hao / Liu, Zhao / Ma, Zhongguo John	Three-dimensional spreading of prestressing forces in box girders	4803-4816
Yi, Jiang / Li, Jianzhong / Tsang, Hing-Ho	Tie-down cable-spring restrainers for seismic protection of isolated bridges	4371-4384
Jiang, Yanju / Song, Biao / Hu, Jiyue / Liang, Hongjun / Rao, Shu	Time-dependent reliability of corroded circular steel tube structures: Characterization of statistical models for material properties	792-803
Lian, Qiang / Yuan, Wancheng / Yu, Juanya / Dang, Xinzhi	Traffic efficiency of post-earthquake road network in fault region retrofitted by friction core rubber bearing	54-67
Cuevas, Rocío G. / Jiménez-Alonso, Javier F. / Martinez, Francisco / Díaz, Iván M.	Uncertainty-based approaches for the lateral vibration serviceability assessment of slender footbridges	3475-3485
Meng, Debiao / Hu, Zhengguo / Guo, Jinbao / Lv, Zhiyuan / Xie, Tianwen / Wang, Zihao	An uncertainty-based structural design and optimization method with interval Taylor expansion	4492-4500
Sun, Xiaoying / He, Rijin / Wu, Yue / Wang, Tengfei	Uniaxial tearing properties and the tearing residual strength models of PTFE coated fabric	1354-1364
Bechert, Simon / Aldinger, Lotte / Wood, Dylan / Knippers, Jan / Menges, Achim	Urbach Tower: Integrative structural design of a lightweight structure made of self-shaped curved cross-laminated timber	3667-3681
Sofi, Fayaz A. / Steelman, Joshua S.	Using committees of artificial neural networks with finite element modeling for steel girder bridge load rating estimation	533-553
Degli Abbati, S. / Cattari, S. / Lagomarsino, S.	Validation of displacement-based procedures for rocking assessment of cantilever masonry elements	3397-3416
Padalu, Pravin Kumar Venkat Rao / Singh, Yogendra	Variation in compressive properties of Indian brick masonry and its assessment using empirical models	1734-1753
Alsanat, Husam / Gunalan, Shanmuganathan / Poologanathan, Keerthan / Guan, Hong	Web crippling capacities of fastened aluminium lipped channel sections subjected to one-flange loading conditions	1754-1763
Deng, Pengru / Matsumoto, Takashi	Weight function calculation method for analyzing mixed-mode shear cracks in reinforced concrete beams	1327-1339
Wang, Lei / Zhang, Wei / Liu, li-sheng / Zhang, Zheng-hua	Wind force of super high-rise buildings with hexagonal section	283-291
Rizzo, Fabio / Ierimonti, Laura / Venanzi, Ilaria / Sacconi, Stefano	Wind-induced vibration mitigation of video screen rooms in high-rise buildings	2388-2401

Informations
sur cette fiche
IssueID
58584
Publié(e) le:
15.05.2021
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structures - octobre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structures - octobre 2021

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.