Smart Materials and Structures - v. 28, n. 1 (janvier 2019)

Publié:	janvier 2019

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Kshad, Mohamed Ali Emhmed / Popinigis, Clement / Naguib, Hani E.	3D printing of Ron-Resch-like origami cores for compression and impact load damping	015027
Mascareñas, David / Lockhart, Michelle / Lienert, Thomas	Barkhausen noise as an intrinsic fingerprint for ferromagnetic components	015014
Wang, Yuanlong / Zhao, Wanzhong / Wang, Huaming / Liu, Zhi	A bio-inspired novel active elastic component based on negative Poisson's ratio structure and dielectric elastomer	015011
Emiliavaca, A. / de Araújo, C. J. / Souto, C. R. / Ries, A.	Characterization of shape memory alloy micro-springs for application in morphing wings	015010
Wang, Xiaole / Xu, Jiajie / Ding, Jingjing / Zhao, Chunyu / Huang, Zhenyu	A compact and low-frequency acoustic energy harvester using layered acoustic metamaterials	025035
Li, Xiang / Chen, Zhiwei / Yao, Zhiyuan	Contact analysis and performance evaluation of standing-wave linear ultrasonic motors via a physics-based contact model	015032
Bai, Xian-Xu / Shen, Sheng / Wereley, Norman M. / Wang, Dai-Hua	Controllability of magnetorheological shock absorber: I. Insights, modeling and simulation	015022
Bai, Xian-Xu / Deng, Xue-Cai / Shen, Sheng	Controllability of magnetorheological shock absorber: II. Testing and analysis	015023
Li, Yang / Shen, Xing / Chen, Yuchen	Design, experiment and verification of a refined resonance method for property measurement of piezoelectric stack	015033
Chen, Yafeng / Meng, Fei / Li, Guangyao / Huang, Xiaodong	Designing photonic materials with complete band gaps by topology optimization	015025
Restorff, James B. / Wun-Fogle, Marilyn / Summers, Eric / Kaufman, Rick / Jones, Nicholas J.	Development of a galfenol actuator for operation under tension	035013
Jeong, Jong-Hyun / Xu, Jian / Jo, Hongki / Li, Jian / Kong, Xiangxiong / Collins, William / Bennett, Caroline / Laflamme, Simon	Development of wireless sensor node hardware for large-area capacitive strain monitoring	015002
Sharma, Atul Kumar / Joglekar, M. M.	Effect of anisotropy on the dynamic electromechanical instability of a dielectric elastomer actuator	015006
Sikdar, Shirsendu / Fiborek, Piotr / Kudela, Paweł / Banerjee, Sauvik / Ostachowicz, Wiesław	Effects of debonding on Lamb wave propagation in a bonded composite structure under variable temperature conditions	015021
Yang, Zhenjun / Kurita, Hiroki / Onodera, Ryuichi / Tayama, Tsuyoki / Chiba, Daiki / Narita, Fumio	Evaluation of vibration energy harvesting using a magnetostrictive iron-cobalt/nickel-clad plate	034001
Haider, Mohammad Faisal / Poddar, Banibrata / Giurgiutiu, Victor	Experimental validation of an analytical method to predict lamb wave scattering from a discontinuity	015012
Chang, Longfei / Yang, Qian / Niu, Qingzheng / Wang, Yanjie / Liu, Yanfa / Lu, Pin / He, Qingsong / Wu, Yucheng / Hu, Ying	High-performance ionic polymer–metal composite actuators fabricated with microneedle roughening	015007
Guo, Haoyu / Shi, Lei / Yang, Meng / Wang, Jikun / Yang, Ruisen / Qu, Shaoxing / Lu, Tongqing	Highly stretchable and transparent dielectric gels for high sensitivity tactile sensors	024003
Kim, Sung Yong / Choi, Baek Gyu / Baek, Woon Kyung / Park, Se Hoon / Park, Sang Wook / Shin, Jeong Woo / Kang, Inpil	Impact paint sensor based on polymer/multi-dimension carbon nano isotopes composites	035025
Fan, Xingyu / Li, Jun / Hao, Hong	Impedance resonant frequency sensitivity based structural damage identification with sparse regularization: experimental studies	015003
Lee, Kenneth K. C. / Dobashi, Yuta / Herman, Peter R. / Madden, John D. W. / Yang, Victor X. D.	Improved charging and strain rates by laser perforating polypyrrole actuator electrodes	015028
Venkatesh, Vijay / Katsube, Noriko / Sundaresan, Vishnu Baba	Morphology-dependent mass transport model for mechanoelectrochemistry of polypyrrole	015001
Li, Xiangyang / Yu, Kaiping / Upadrashta, Deepesh / Yang, Yaowen	Multi-branch sandwich piezoelectric energy harvester: Mathematical modeling and validation	035010
Li, Kui / Yang, Zhichun / Gu, Yingsong / He, Shun / Zhou, Shengxi	Nonlinear magnetic-coupled flutter-based aeroelastic energy harvester: modeling, simulation and experimental verification	015020
Sun, Hu / Wang, Tao / Liu, Qijian / Qing, Xinlin	A novel eddy current array sensing film for quantitatively monitoring hole-edge crack growth in bolted joints	015018
Perez-Diaz, Jose Luis / Valiente-Blanco, Ignacio / Cristache, Cristian / Sanchez-García-Casarrubios, Juan / Rodriguez, Fernando / Esnoz Larraya, Judit / Diez-Jimenez, Efrén	A novel high temperature eddy current damper with enhanced performance by means of impedance matching	025034
Lu, Qitao / Wen, Jianming / Hu, Yili / Chen, Kang / Bao, Huilu / Ma, Jijie	Novel inertial piezoelectric actuator with high precision and stability based on a two fixed-end beam structure	015030
Chen, Jian / Yuan, Shenfang / Wang, Hui / Yang, Weibo	On particle filter improvements for on-line crack growth prognosis with guided wave monitoring	035011
Lee, Tae-Hoon / Choi, Seung-Bok	On the response time of a new permanent magnet based magnetorheological damper: experimental investigation	014001
Lim, Yee Yan / Tang, Zi Sheng / Smith, Scott T.	Piezoelectric-based monitoring of the curing of structural adhesives: a novel experimental study	015016
Bruno, Binal P. / Fahmy, Ahmed Raouf / Stürmer, Moritz / Wallrabe, Ulrike / Wapler, Matthias C.	Properties of piezoceramic materials in high electric field actuator applications	015029
Chang, Xi Liang / Chee, Pei Song / Lim, Eng Hock / Chong, Woon Chan	Radio-frequency enabled ionic polymer metal composite (IPMC) actuator for drug release application	015024
Zhu, Zicai / Bian, Changsheng / Ru, Jie / Bai, Wanfa / Chen, Hualing	Rapid deformation of IPMC under a high electrical pulse stimulus inspired by action potential	01LT01
Shen, Qi / Stalbaum, Tyler / Minaian, Nazanin / Oh, Il-Kwon / Kim, Kwang J.	A robotic multiple-shape-memory ionic polymer–metal composite (IPMC) actuator: modeling approach	015009
Brenes, Alexis / Lefeuvre, Elie / Badel, Adrien / Seok, Seonho / Yoo, Chan-Sei	Shunt-diode rectifier: a new scheme for efficient piezoelectric energy harvesting	015015
Santoso, Junius / Skorina, Erik Howard / Salerno, Marco / de Rivaz, Sebastien / Paik, Jamie K. / Onal, Cagdas D.	Single chamber multiple degree-of-freedom soft pneumatic actuator enabled by adjustable stiffness layers	035012
Cai, Mingjing / Liao, Wei-Hsin / Cao, Junyi	A smart harvester for capturing energy from human ankle dorsiflexion with reduced user effort	015026
Testoni, Oleg / Bergamini, Andrea / Bodkhe, Sampada / Ermanni, Paolo	Smart material based mechanical switch concepts for the variation of connectivity in the core of shape-adaptable sandwich panels	025036
Yang, Zhaoshu / Tang, Lihua / Xie, Mengying / Sun, Shuaishuai / Li, Weihua / Aw, Kean	Soft magneto-sensitive elastomer and polyvinylidene fluoride polymer based nonlinear piezoelectric energy harvesting: design, modelling and experiment	015031
Kumar, Manoj / Kumar, Amit / Kumar, Yogesh / Dhiman, Shobhna / Shankar, Uma / Yadav, K. L. / Sharma, G.	Strongly enhanced electrocaloric effects in doped BaTiO3 with reduced grain size	015013
Wan, Yanxiang / Xiong, Yeping / Zhang, Shengming	Temperature effect on viscoelastic properties of anisotropic magnetorheological elastomers under compression	015005
Shih, Hsuan-An / Su, Wei-Jiun	Theoretical analysis and experimental study of a nonlinear U-shaped bi-directional piezoelectric energy harvester	015017
Wang, Wanwan / Chen, Hongxiang / Dai, Qiaoli / Zhao, Dan / Zhou, Yu / Wang, Lijuan / Zeng, Danlin	Thermally healable PTMG-based polyurethane elastomer with robust mechanical properties and high healing efficiency	015008
Helps, Tim / Taghavi, Majid / Rossiter, Jonathan	Thermoplastic electroactive gels for 3D-printable artificial muscles	085001
Cheng, Tingyu / Li, Guori / Liang, Yiming / Zhang, Mingqi / Liu, Bangyuan / Wong, Tuck-Whye / Forman, Jack / Chen, Mianhong / Wang, Guanyun / Tao, Ye / Li, Tiefeng	Untethered soft robotic jellyfish	015019
Truong, Binh Duc / Roundy, Shad	Wireless power transfer system with center-clamped magneto-mechano-electric (MME) receiver: model validation and efficiency investigation	015004

Informations
sur cette fiche
IssueID
21721
Publié(e) le:
23.11.2018
Modifié(e) le:
03.08.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Smart Materials and Structures - v. 28, n. 1 (janvier 2019)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Smart Materials and Structures - v. 28, n. 1 (janvier 2019)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.