Smart Materials and Structures - v. 16, n. 3 (juin 2007)

Publié:	juin 2007

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Shimamoto, A. / Zhao, H. / Azakami, T.	Active control for stress intensity of crack-tips under mixed mode by shape memory TiNi fiber epoxy composites	N13-N21
Raja, M. Ganesh / Narayanan, S.	Active control of tensegrity structures under random excitation	809-817
Si, Hongwei / Li, Dongxu	Active control of vibration using a fuzzy control method based on scaling universes of discourse	555-560
Bandopadhya, Dibakar / Bhattacharya, Bishakh / Dutta, Ashish	An active vibration control strategy for a flexible link using distributed ionic polymer metal composites	617-625
Zhang, T. T. / Shi, Z. F.	Bending behavior of 2–2 multi-layered piezoelectric curved actuators	634-641
Craig, David / Khamesee, Mir Behrad	Black-box model identification of a magnetically levitated microrobotic system	739-747
Ahlawat, S. / Vidyashankar, B. R. / Bhattacharya, B.	Closed-form studies of a new hybrid damping technique using an active layer and hard-coated damping alloys	626-633
Takeda, S. / Yamamoto, T. / Okabe, Y. / Takeda, N.	Debonding monitoring of composite repair patches using embedded small-diameter FBG sensors	763-770
Huang, J. R. / Gu, C. P. / Meng, F. L. / Li, M. Q. / Liu, J. H.	Detection of volatile organic compounds by using a single temperature-modulated SnO2gas sensor and artificial neural network	701-705
Li, Fenlan / Jiang, Zhongwei	Development of a piezo-cantilever transducer and measuring method for evaluation of a temperature-sensitive polymer gel membrane	858-865
Sung, Kum-Gil / Han, Young-Min / Lim, Kye-Hyun / Choi, Seung-Bok	Discrete-time fuzzy sliding mode control for a vehicle suspension system featuring an electrorheological fluid damper	798-808
Li, Hongyun / Yang, Yaowen	Dynamic response and active control of a composite cylindrical shell with piezoelectric shear actuators	909-918
Meng, Qinghao / Hu, Jinlian / Yeung, Lapyan	An electro-active shape memory fibre by incorporating multi-walled carbon nanotubes	830-836
Madhav, Annamdas Venu Gopal / Soh, Chee Kiong	An electromechanical impedance model of a piezoceramic transducer-structure in the presence of thick adhesive bonding	673-686
Bergamini, A. / Christen, R. / Motavalli, M.	Electrostatically tunable bending stiffness in a GFRP–CFRP composite beam	575-582
Chen, Sihai / Ma, Hong / Xiang, Sihua / Yi, Xinjian	Fabrication and performance of microbolometer arrays based on nanostructured vanadium oxide thin films	696-700
Ozbulut, O. E. / Mir, C. / Moroni, M. O. / Sarrazin, M. / Roschke, P. N.	A fuzzy model of superelastic shape memory alloys for vibration control in civil engineering applications	818-829
Swift, C. I. / Pierce, S. G. / Culshaw, B.	Generation of a steerable ultrasonic beam using a phased array of low power semiconductor laser sources and fiber optic delivery	728-732
Shivakumar, J. / Ray, M. C.	Geometrically nonlinear analysis of antisymmetric angle-ply smart composite plates integrated with a layer of piezoelectric fiber reinforced composite	754-762
Glushkov, Evgeny / Glushkova, Natalia / Kvasha, Oleg / Seemann, Wolfgang	Integral equation based modeling of the interaction between piezoelectric patch actuators and an elastic substrate	650-664
Ausanio, G. / Campana, C. / Hison, C. / Iannotti, V. / Lanotte, L.	Linearity of the direct elastomagnetic effect: evaluation and limits	570-574
Han, Haipeng / Taheri, Farid / Pegg, Neil / Zhang, Zheng	Local buckling mitigation and stress analysis of a shape memory alloy hybrid composite plate with and without a cutout	589-604
Tang, Jaw-Luen / Wang, Jian-Neng	Measurement of chloride-ion concentration with long-period grating technology	665-672
Saha, Gobinda C. / Kalamkarov, Alexander L. / Georgiades, Anastasis V.	Micromechanical analysis of effective piezoelastic properties of smart composite sandwich shells made of generally orthotropic materials	866-883
Pei, Yongmao / Fang, Daining	A model for giant magnetostrain and magnetization in the martensitic phase of NiMnGa alloys	779-783
Lee, Sangki / Kim, Kwang J. / Park, Il-Seok	Modeling and experiment of a muscle-like linear actuator using an ionic polymer–metal composite and its actuation characteristics	583-588
Ikhouane, Fayçal / Dyke, Shirley J.	Modeling and identification of a shear mode magnetorheological damper	605-616
de Araújo, Carlos José / Gonzalez, Cezar Henrique	On two-step strain–temperature behavior in Cu–Zn–Al shape memory alloy wire actuators	884-890
Vittayakorn, Naratip / Wirunchit, Supamas	Perovskite formation, dielectric and ferroelectric properties of PbZrO3–Pb(Ni1/3Nb2/3)O3 ceramics via a columbite precursor synthetic route	851-857
Huang, D. J. / Ding, H. J. / Chen, W. Q.	Piezoelasticity solutions for functionally graded piezoelectric beams	687-695
Vos, Roelof / Barrett, Ron / De Breuker, Roeland / Tiso, Paolo	Post-buckled precompressed elements: a new class of control actuators for morphing wing UAVs	919-926
Dong, Saying / Peng, Gangding / Luo, Yanan	Preparation techniques of metal clad fibres for corrosion monitoring of steel materials	733-738
Liem, H. / Yeung, L. Y. / Hu, J. L.	A prerequisite for the effective transfer of the shape-memory effect to cotton fibers	748-753
Anton, Steven R. / Sodano, Henry A.	A review of power harvesting using piezoelectric materials (2003–2006)	R1-R21
Wang, H. / Ogin, S. L. / Thorne, A. M. / Reed, G. T. / Ussorio, M.	The sensitivity of a polarimetric sensor embedded in unidirectional and cross-ply composite laminates	642-649
Zhang, Wei / Shi, Bin / Zhang, Yu-Feng / Liu, Jie / Zhu, You-Qun	The strain field method for structural damage identification using Brillouin optical fiber sensing	843-850
Yang, J. / Xiang, H. J.	Thermo-electro-mechanical characteristics of functionally graded piezoelectric actuators	784-797
Freed, Yuval / Aboudi, Jacob / Gilat, Rivka	Thermomechanically micromechanical modeling of prestressed concrete reinforced with shape memory alloy fibers	717-727
Gong, ChangYang / Qian, ZhiYong / Liu, CaiBing / Huang, MeiJuan / Gu, YingChun / Wen, YanJun / Kan, Bing / Wang, Ke / Dai, Mei / Li, XingYi / Gou, MaLing / Tu, MingJing / Wei, YuQuan	A thermosensitive hydrogel based on biodegradable amphiphilic poly(ethylene glycol)–polycaprolactone–poly(ethylene glycol) block copolymers	927-933
Akhras, G. / Li, W. C.	Three-dimensional static, vibration and stability analysis of piezoelectric composite plates using a finite layer method	561-569
Falvo, A. / Furgiuele, F. / Maletta, C.	Two-way shape memory effect of a Ti rich NiTi alloy: experimental measurements and numerical simulations	771-778
Yeh, Jia-Yi	Vibration control of a sandwich annular plate with an electrorheological fluid core layer	837-842
Lim, S. C. / Choi, S. B.	Vibration control of an HDD disk-spindle system using piezoelectric bimorph shunt damping: II. Optimal design and shunt damping implementation	901-908
Lim, S. C. / Choi, S. B.	Vibration control of an HDD disk-spindle system utilizing piezoelectric bimorph shunt damping: I. Dynamic analysis and modeling of the shunted drive	891-900
Hu, Yuhang / Yang, Yaowen	Wave propagation modeling of the PZT sensing region for structural health monitoring	706-716

Informations
sur cette fiche
IssueID
21367
Publié(e) le:
04.12.2018
Modifié(e) le:
03.08.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Smart Materials and Structures - v. 16, n. 3 (juin 2007)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Smart Materials and Structures - v. 16, n. 3 (juin 2007)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.