Smart Materials and Structures - v. 16, n. 1 (février 2007)

Publié:	février 2007

Auteur(s)	Titre	Page(s)
Auricchio, Ferdinando / Fugazza, Davide / DesRoches, Reginald	A 1D rate-dependent viscous constitutive model for superelastic shape-memory alloys: formulation and comparison with experimental data	S39-S50
Meyer, Y. / Verdot, T. / Collet, M. / Baborowski, J. / Muralt, P.	Active isolation of electronic micro-components with piezoelectrically transduced silicon MEMS devices	128-134
Choi, Seung-Bok / Hong, Sung-Ryong	Active vibration control of a flexible structure using an inertial type piezoelectric mount	25-35
Deshmukh, Suraj S. / McKinley, Gareth H.	Adaptive energy-absorbing materials using field-responsive fluid-impregnated cellular solids	106-113
Cheng, C. H. / Chen, S. C. / Zhang, Z. X. / Lin, Y. C.	Analysis and experiment for the deflection of a shear-mode PZT actuator	230-236
Khouli, F. / Langlois, R. G. / Afagh, F. F.	Analysis of active closed cross-section slender beams based on asymptotically correct thin-wall beam theory	221-229
Wang, Q. / Varadan, V. K.	Application of nonlocal elastic shell theory in wave propagation analysis of carbon nanotubes	178-190
Vitiello, Antonio / Squillace, Antonino / Prisco, Umberto	Characterization of NiTinol under torsional loads through a numerical implementation of the Boyd–Lagoudas constitutive model and comparison of the results with experimental data	76-82
Tanaka, Nobuo / Sakano, Hideaki	Cluster power flow control of a distributed-parameter planar structure for generating a vibration-free zone	47-56
Chen, Q. / Li, D. Y.	A computational study of the improvement in wear resistance of a pseudoelastic TiNi matrix composite achieved by adding TiN nanoparticles	S63-S70
Liu, Mengwei / Wang, Jing / Wang, Liding / Cui, Tianhong	Deposition and characterization of Pb(Zr,Ti)O3 sol–gel thin films for piezoelectric cantilever beams	93-99
Jun, Hyoung Y. / Rediniotis, Othon K. / Lagoudas, Dimitris C.	Development of a fuel-powered shape memory alloy actuator system: I. Numerical analysis	S81-S94
Jun, Hyoung Y. / Rediniotis, Othon K. / Lagoudas, Dimitris C.	Development of a fuel-powered shape memory alloy actuator system: II. Fabrication and testing	S95-S107
Bhattacharyya, A. / Dervishi, E. / Berry, B. / Viswanathan, T. / Bourdo, S. / Kim, Hokyung / Sproles, R. / Hudson, M. K.	Energy efficient graphite–polyurethane electrically conductive coatings for thermally actuated smart materials	S187-S195
Park, J. B. / Hwang, T. K. / Kim, H. G. / Doh, Y. D.	Experimental and numerical study of the electrical anisotropy in unidirectional carbon-fiber-reinforced polymer composites	57-66
Iadicola, M. A. / Shaw, J. A.	An experimental method to measure initiation events during unstable stress-induced martensitic transformation in a shape memory alloy wire	S155-S169
Sade, M. / Damiani, C. / Gastien, R. / Lovey, F. C. / Malarría, J. / Yawny, A.	Fatigue and martensitic transitions in Cu–Zn–Al and Cu–Al–Ni single crystals: mechanical behaviour, defects and diffusive phenomena	S126-S136
Serry, M. Y. / Moussa, W. A. / Raboud, D. W.	Finite element investigation of the behavior of SMA damage-control smart system	S71-S80
Batifol, C. / Zielinski, T. G. / Ichchou, M. N. / Galland, M.-A.	A finite-element study of a piezoelectric/poroelastic sound package concept	168-177
Chung, Jong-Ha / Heo, Jin-Seok / Lee, Jung-Ju	Implementation strategy for the dual transformation region in the Brinson SMA constitutive model	N1-N5
Feng, P. / Sun, Q. P.	In situ profilometry for non-uniform strain field measurement of NiTi shape memory alloy microtubing under complex stress states	S179-S186
Schrooten, Jan / Assad, Michel / van Humbeeck, Jan / Leroux, Michel A.	In vitrocorrosion resistance of porous NiTi intervertebral fusion devices	S145-S154
Su, J. F. / Huang, W. M. / Hong, M. H.	Indentation and two-way shape memory in a NiTi polycrystalline shape-memory alloy	S137-S144
Ahlers, M.	Martensitic transformation and plastic deformation: a comparison	S115-S125
Sadjadpour, Amir / Bhattacharya, Kaushik	A micromechanics inspired constitutive model for shape-memory alloys: the one-dimensional case	S51-S62
Tanaka, Nobuo / Sanada, Takeshi	Modal control of a rectangular plate using smart sensors and smart actuators	36-46
Stoilov, Vesselin	A multiscale model of reorientation in magnetic shape memory alloys	S1-S10
Bonomo, C. / Fortuna, L. / Giannone, P. / Graziani, S. / Strazzeri, S.	A nonlinear model for ionic polymer metal composites as actuators	1-12
Ramamoorthy, K. / Kumar, K. / Koinkar, Pankaj / Ganesan, K. / Shah, Amit P. / Sankaranarayanan, K. / Ramasamy, P.	A novel in situ method for simultaneous growth of smart material single crystals and thin films	83-88
Murasawa, Go / Yoneyama, Satoru / Sakuma, Toshio	Nucleation, bifurcation and propagation of local deformation arising in NiTi shape memory alloy	160-167
Ren, Wenjie / Li, Hongnan / Song, Gangbing	A one-dimensional strain-rate-dependent constitutive model for superelastic shape memory alloys	191-197
Sulieman, Kamal Mahir / Huang, Xintang / Liu, Jinping / Tang, Ming	One-step growth of ZnO/ZnS core–shell nanowires by thermal evaporation	89-92
Gupta, V. K. / Seshu, P. / Issac, K. Kurien / Shevgaonkar, R. K.	Optimal steering of a paraboloid antenna using piezoelectric actuators	67-75
Carbonari, Ronny C. / Silva, Emílio C. N. / Nishiwaki, Shinji	Optimum placement of piezoelectric material in piezoactuator design	207-220
Kim, Seong Jun / Lee, In Taek / Kim, Yong Hyup	Performance enhancement of IPMC actuator by plasma surface treatment	N6-N11
Liu, J. / Cao, X. S. / Wang, Z. K.	Propagation of Love waves in a smart functionally graded piezoelectric composite structure	13-24
Couch, Ronald N. / Chopra, Inderjit	A quasi-static model for NiMnGa magnetic shape memory alloy	S11-S21
Anderson, Tony / Manubarthi, Udai / Corti, Giancarlo / Anderson, Michael	Response prediction of switched inductor/piezoelectric vibration suppression	135-139
Kavlicoglu, Nigar C. / Kavlicoglu, Barkan M. / Liu, Yanming / Evrensel, Cahit A. / Fuchs, Alan / Korol, George / Gordaninejad, Faramarz	Response time and performance of a high-torque magneto-rheological fluid limited slip differential clutch	149-159
Callaway, J. D. / Hamilton, R. F. / Sehitoglu, H. / Miller, N. / Maier, H. J. / Chumlyakov, Y.	Shape memory and martensite deformation response of Ni2MnGa	S108-S114
Liu, Yinong / Yang, Hong	Strain dependence of the Clausius–Clapeyron relation for thermoelastic martensitic transformations in NiTi	S22-S27
Suba, Csongor / Kovács, Krisztina / Kiss, Gábor / Vida, György / Varga, Máté / Velich, Norbert / Kovács, Lajos / Kádár, Bence / Szabó, György	Study of the interaction between Ti-based osteosynthesis plates and the human body by XPS, SIMS and AES	100-105
Shaw, John A. / Grummon, David S. / Foltz, John	Superelastic NiTi honeycombs: fabrication and experiments	S170-S178
Kumar, M. Kishore / Sakthivel, K. / Sivakumar, S. M. / Rao, C. Lakshmana / Srinivasa, A.	Thermomechanical modeling of hysteresis in SMAs using the dissipationless reference response	S28-S38
He, Yong-Yong / Oi, Satoko / Chu, Fu-Lei / Li, Han-Xiong	Vibration control of a rotor–bearing system using shape memory alloy: I. Theory	114-121
He, Yong-Yong / Oi, Satoko / Chu, Fu-Lei / Li, Han-Xiong	Vibration control of a rotor–bearing system using shape memory alloy: II. Experimental study	122-127
Zhou, Hao-Miao / Zhou, You-He	Vibration suppression of laminated composite beams using actuators of giant magnetostrictive materials	198-206
Annaz, Fawaz Yahya	Worthy test programmes and developments of smart electromechanical actuators	140-148

Auteur(s)

Titre

Page(s)

Auricchio, Ferdinando / Fugazza, Davide / DesRoches, Reginald

A 1D rate-dependent viscous constitutive model for superelastic shape-memory alloys: formulation and comparison with experimental data

S39-S50

Meyer, Y. / Verdot, T. / Collet, M. / Baborowski, J. / Muralt, P.

Active isolation of electronic micro-components with piezoelectrically transduced silicon MEMS devices

128-134

Choi, Seung-Bok / Hong, Sung-Ryong

Active vibration control of a flexible structure using an inertial type piezoelectric mount

25-35

Deshmukh, Suraj S. / McKinley, Gareth H.

Adaptive energy-absorbing materials using field-responsive fluid-impregnated cellular solids

106-113

Cheng, C. H. / Chen, S. C. / Zhang, Z. X. / Lin, Y. C.

Analysis and experiment for the deflection of a shear-mode PZT actuator

230-236

Khouli, F. / Langlois, R. G. / Afagh, F. F.

Analysis of active closed cross-section slender beams based on asymptotically correct thin-wall beam theory

221-229

Wang, Q. / Varadan, V. K.

Application of nonlocal elastic shell theory in wave propagation analysis of carbon nanotubes

178-190

Vitiello, Antonio / Squillace, Antonino / Prisco, Umberto

Characterization of NiTinol under torsional loads through a numerical implementation of the Boyd–Lagoudas constitutive model and comparison of the results with experimental data

76-82

Tanaka, Nobuo / Sakano, Hideaki

Cluster power flow control of a distributed-parameter planar structure for generating a vibration-free zone

47-56

Chen, Q. / Li, D. Y.

A computational study of the improvement in wear resistance of a pseudoelastic TiNi matrix composite achieved by adding TiN nanoparticles

S63-S70

Liu, Mengwei / Wang, Jing / Wang, Liding / Cui, Tianhong

Deposition and characterization of Pb(Zr,Ti)O3 sol–gel thin films for piezoelectric cantilever beams

93-99

Jun, Hyoung Y. / Rediniotis, Othon K. / Lagoudas, Dimitris C.

Development of a fuel-powered shape memory alloy actuator system: I. Numerical analysis

S81-S94

Jun, Hyoung Y. / Rediniotis, Othon K. / Lagoudas, Dimitris C.

Development of a fuel-powered shape memory alloy actuator system: II. Fabrication and testing

S95-S107

Bhattacharyya, A. / Dervishi, E. / Berry, B. / Viswanathan, T. / Bourdo, S. / Kim, Hokyung / Sproles, R. / Hudson, M. K.

Energy efficient graphite–polyurethane electrically conductive coatings for thermally actuated smart materials

S187-S195

Park, J. B. / Hwang, T. K. / Kim, H. G. / Doh, Y. D.

Experimental and numerical study of the electrical anisotropy in unidirectional carbon-fiber-reinforced polymer composites

57-66

Iadicola, M. A. / Shaw, J. A.

An experimental method to measure initiation events during unstable stress-induced martensitic transformation in a shape memory alloy wire

S155-S169

Sade, M. / Damiani, C. / Gastien, R. / Lovey, F. C. / Malarría, J. / Yawny, A.

Fatigue and martensitic transitions in Cu–Zn–Al and Cu–Al–Ni single crystals: mechanical behaviour, defects and diffusive phenomena

S126-S136

Serry, M. Y. / Moussa, W. A. / Raboud, D. W.

Finite element investigation of the behavior of SMA damage-control smart system

S71-S80

Batifol, C. / Zielinski, T. G. / Ichchou, M. N. / Galland, M.-A.

A finite-element study of a piezoelectric/poroelastic sound package concept

168-177

Chung, Jong-Ha / Heo, Jin-Seok / Lee, Jung-Ju

Implementation strategy for the dual transformation region in the Brinson SMA constitutive model

N1-N5

Feng, P. / Sun, Q. P.

In situ profilometry for non-uniform strain field measurement of NiTi shape memory alloy microtubing under complex stress states

S179-S186

Schrooten, Jan / Assad, Michel / van Humbeeck, Jan / Leroux, Michel A.

In vitrocorrosion resistance of porous NiTi intervertebral fusion devices

S145-S154

Su, J. F. / Huang, W. M. / Hong, M. H.

Indentation and two-way shape memory in a NiTi polycrystalline shape-memory alloy

S137-S144

Ahlers, M.

Martensitic transformation and plastic deformation: a comparison

S115-S125

Sadjadpour, Amir / Bhattacharya, Kaushik

A micromechanics inspired constitutive model for shape-memory alloys: the one-dimensional case

S51-S62

Tanaka, Nobuo / Sanada, Takeshi

Modal control of a rectangular plate using smart sensors and smart actuators

36-46

Stoilov, Vesselin

A multiscale model of reorientation in magnetic shape memory alloys

S1-S10

Bonomo, C. / Fortuna, L. / Giannone, P. / Graziani, S. / Strazzeri, S.

A nonlinear model for ionic polymer metal composites as actuators

1-12

Ramamoorthy, K. / Kumar, K. / Koinkar, Pankaj / Ganesan, K. / Shah, Amit P. / Sankaranarayanan, K. / Ramasamy, P.

A novel in situ method for simultaneous growth of smart material single crystals and thin films

83-88

Murasawa, Go / Yoneyama, Satoru / Sakuma, Toshio

Nucleation, bifurcation and propagation of local deformation arising in NiTi shape memory alloy

160-167

Ren, Wenjie / Li, Hongnan / Song, Gangbing

A one-dimensional strain-rate-dependent constitutive model for superelastic shape memory alloys

191-197

Sulieman, Kamal Mahir / Huang, Xintang / Liu, Jinping / Tang, Ming

One-step growth of ZnO/ZnS core–shell nanowires by thermal evaporation

89-92

Gupta, V. K. / Seshu, P. / Issac, K. Kurien / Shevgaonkar, R. K.

Optimal steering of a paraboloid antenna using piezoelectric actuators

67-75

Carbonari, Ronny C. / Silva, Emílio C. N. / Nishiwaki, Shinji

Optimum placement of piezoelectric material in piezoactuator design

207-220

Kim, Seong Jun / Lee, In Taek / Kim, Yong Hyup

Performance enhancement of IPMC actuator by plasma surface treatment

N6-N11

Liu, J. / Cao, X. S. / Wang, Z. K.

Propagation of Love waves in a smart functionally graded piezoelectric composite structure

13-24

Couch, Ronald N. / Chopra, Inderjit

A quasi-static model for NiMnGa magnetic shape memory alloy

S11-S21

Anderson, Tony / Manubarthi, Udai / Corti, Giancarlo / Anderson, Michael

Response prediction of switched inductor/piezoelectric vibration suppression

135-139

Kavlicoglu, Nigar C. / Kavlicoglu, Barkan M. / Liu, Yanming / Evrensel, Cahit A. / Fuchs, Alan / Korol, George / Gordaninejad, Faramarz

Response time and performance of a high-torque magneto-rheological fluid limited slip differential clutch

149-159

Callaway, J. D. / Hamilton, R. F. / Sehitoglu, H. / Miller, N. / Maier, H. J. / Chumlyakov, Y.

Shape memory and martensite deformation response of Ni2MnGa

S108-S114

Liu, Yinong / Yang, Hong

Strain dependence of the Clausius–Clapeyron relation for thermoelastic martensitic transformations in NiTi

S22-S27

Suba, Csongor / Kovács, Krisztina / Kiss, Gábor / Vida, György / Varga, Máté / Velich, Norbert / Kovács, Lajos / Kádár, Bence / Szabó, György

Study of the interaction between Ti-based osteosynthesis plates and the human body by XPS, SIMS and AES

100-105

Shaw, John A. / Grummon, David S. / Foltz, John

Superelastic NiTi honeycombs: fabrication and experiments

S170-S178

Kumar, M. Kishore / Sakthivel, K. / Sivakumar, S. M. / Rao, C. Lakshmana / Srinivasa, A.

Thermomechanical modeling of hysteresis in SMAs using the dissipationless reference response

S28-S38

He, Yong-Yong / Oi, Satoko / Chu, Fu-Lei / Li, Han-Xiong

Vibration control of a rotor–bearing system using shape memory alloy: I. Theory

114-121

He, Yong-Yong / Oi, Satoko / Chu, Fu-Lei / Li, Han-Xiong

Vibration control of a rotor–bearing system using shape memory alloy: II. Experimental study

122-127

Zhou, Hao-Miao / Zhou, You-He

Vibration suppression of laminated composite beams using actuators of giant magnetostrictive materials

198-206

Annaz, Fawaz Yahya

Worthy test programmes and developments of smart electromechanical actuators

140-148

Publicité

Smart Materials and Structures - v. 16, n. 1 (février 2007)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Smart Materials and Structures - v. 16, n. 1 (février 2007)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.