Smart Materials and Structures - v. 24, n. 3 (mars 2015)

Publié:	mars 2015

Auteur(s)	Titre	Page(s)
Wang, Geng / Rao, Changhui	Adaptive control of piezoelectric fast steering mirror for high precision tracking application	035019
Vigliotti, Andrea / Pasini, Damiano	Analysis and design of lattice materials for large cord and curvature variations in skin panels of morphing wings	037006
Behrooz, Majid / Sutrisno, Joko / Zhang, Lingyue / Fuchs, Alan / Gordaninejad, Faramarz	Behavior of magnetorheological elastomers with coated particles	035026
Feng, Ning / Liu, Liwu / Liu, Yanju / Leng, Jinson	A bio-inspired, active morphing skin for camber morphing structures	035023
Ju, Feng / Ling, Shih-Fu	Bioinspired active whisker sensor for geometry detection of high aspect ratio microholes with simultaneous actuation and sensing capability	035010
Lu, Haibao / Lu, Chunrui / Huang, Wei Min / Leng, Jinsong	Chemo-responsive shape memory effect in shape memory polyurethane triggered by inductive release of mechanical energy storage undergoing copper (II) chloride migration	035018
Chatzigeorgiou, George / Chemisky, Yves / Meraghni, Fodil	Computational micro to macro transitions for shape memory alloy composites using periodic homogenization	035009
Hall, J. / Qamar, I. P. S. / Rendall, T. C. S. / Trask, R. S.	A computational model for the flow of resin in self-healing composites	037002
Rodriguez, Gerardo / Casas, Joan R. / Villaba, Sergi	Cracking assessment in concrete structures by distributed optical fiber	035005
Borlandelli, E. / Scarselli, D. / Nespoli, A. / Rigamonti, D. / Bettini, P. / Morandini, M. / Villa, E. / Sala, G. / Quadrio, M.	Design and experimental characterization of a NiTi-based, high-frequency, centripetal peristaltic actuator	035008
Sohn, Jung Woo / Oh, Jong-Seok / Choi, Seung-Bok	Design and novel type of a magnetorheological damper featuring piston bypass hole	035013
Gandhi, Farhan / Hayden, Eric	Design, development, and hover testing of a helicopter rotor blade chord extension morphing system	035024
Amiri Moghadam, Amir Ali / Kouzani, Abbas / Torabi, Keivan / Kaynak, Akif / Shahinpoor, Mohsen	Development of a novel soft parallel robot equipped with polymeric artificial muscles	035017
Leist, Steven K. / Kunkle, Claire / Chong, Parkson Lee-Gau / Zhou, Jack	Dual chamber shape memory alloy unplugging and mixing system coupled to a high pressure optical cell for biophysical studies	035014
Brooke, Robert / Fabretto, Manrico / Vucaj, Nastasja / Zuber, Kamil / Switalska, Eliza / Reeks, Lachlan / Murphy, Peter / Evans, Drew	Effect of oxidant on the performance of conductive polymer films prepared by vacuum vapor phase polymerization for smart window applications	035016
Perez, M. / Boisseau, S. / Gasnier, P. / Willemin, J. / Reboud, J. L.	An electret-based aeroelastic flutter energy harvester	035004
Zhou, Jinzhu / Huang, Jin / Song, Liwei / Zhang, Dan / Ma, Yunchao	Electromechanical co-design and experiment of structurally integrated antenna	037004
Duo, Yi / Costil, Sophie / Pfeiffer, Pierre / Serio, Bruno	Embedding properties of optical fibers integrated into ceramic coatings obtained by wire flame thermal spray	035027
Zhao, Liya / Yang, Yaowen	Enhanced aeroelastic energy harvesting with a beam stiffener	032001
Yong Jung, Sun / Ko, Seong Young / Park, Jong-Oh / Park, Sukho	Enhanced ionic polymer metal composite actuator with porous nafion membrane using zinc oxide particulate leaching method	037007
An, Le / Wang, Fangfang / Cheng, Sibo / Lu, Tongqing / Wang, T. J.	Experimental investigation of the electromechanical phase transition in a dielectric elastomer tube	035006
Liu, Fengli / Alici, Gursel / Zhang, Binbin / Beirne, Stephen / Li, Weihua	Fabrication and characterization of a magnetic micro-actuator based on deformable Fe-doped PDMS artificial cilium using 3D printing	035015
Yu, Yang / Li, Yancheng / Li, Jianchun	Forecasting hysteresis behaviours of magnetorheological elastomer base isolator utilizing a hybrid model based on support vector regression and improved particle swarm optimization	035025
Quaegebeur, N. / Ostiguy, P.-C. / Masson, P.	Hybrid empirical/analytical modeling of guided wave generation by circular piezoceramics	035003
Lou, Jun-Qiang / Wei, Yan-Ding / Yang, Yi-Ling / Xie, Feng-ran	Hybrid PD and effective multi-mode positive position feedback control for slewing and vibration suppression of a smart flexible manipulator	035007
Ning, Nanying / Yan, Bingyue / Liu, Suting / Yao, Yang / Zhang, Liqun / Chan, Tung W. / Nishi, Toshio / Tian, Ming	Improved actuated strain of dielectric elastomer through disruption of hydrogen bonds of thermoplastic polyurethane by adding diaminonaphthalene	032002
Le, Adam Y. / Mills, James K. / Benhabib, Beno	Improved linear ultrasonic motor performance with square-wave based driving-tip trajectory	037003
Kramarenko, E. Yu / Chertovich, A. V. / Stepanov, G. V. / Semisalova, A. S. / Makarova, L. A. / Perov, N. S. / Khokhlov, A. R.	Magnetic and viscoelastic response of elastomers with hard magnetic filler	035002
Yao, Xing-Yan / Yu, Miao / Fu, Jie	Magnetic-enhanced normal force of magnetorheological fluids	035001
Attaran, Abdolhamid / Brummund, Jörg / Wallmersperger, Thomas	Modeling and simulation of the bending behavior of electrically-stimulated cantilevered hydrogels	035021
Savi, Marcelo A. / Pacheco, Pedro Manuel C. L. / Garcia, Mauricio S. / Aguiar, Ricardo A. A. / de Souza, Luís Felipe G. / da Hora, Rodolpho B.	Nonlinear geometric influence on the mechanical behavior of shape memory alloy helical springs	035012
Makihara, Kanjuro / Yamamoto, Yuta / Yoshimizu, Kenji / Horiguchi, Chikahiro / Sakaguchi, Hitoshi / Fujimoto, Katsumi	A novel controller to increase harvested energy from negating vibration-suppression effect	037005
Chiroiu, Veturia / Florinel Ionescu, Marius / Sireteanu, Tudor / Ioan, Rodica / Munteanu, Ligia	On intrinsic time measure in the modeling of cyclic behavior of a Nitinol cubic block	035022
Li, Dongsheng / Ho, Siu-Chun M. / Song, Gangbing / Ren, Liang / Li, Hongnan	A review of damage detection methods for wind turbine blades	033001
Michaud, Hadrien O. / Teixidor, Joan / Lacour, Stéphanie P.	Soft metal constructs for large strain sensor membrane	035020
Ge, Lin / Xuan, Shouhu / Liao, Guojiang / Yin, Tiantian / Gong, Xinglong	Stretchable polyurethane sponge reinforced magnetorheological material with enhanced mechanical properties	037001
Gao, Yingxin / Zhang, Chi	Structure–function relationship of skeletal muscle provides inspiration for design of new artificial muscle	033002
Holschuh, B. / Newman, D.	Two-spring model for active compression textiles with integrated NiTi coil actuators	035011

Auteur(s)

Titre

Page(s)

Wang, Geng / Rao, Changhui

Adaptive control of piezoelectric fast steering mirror for high precision tracking application

035019

Vigliotti, Andrea / Pasini, Damiano

Analysis and design of lattice materials for large cord and curvature variations in skin panels of morphing wings

037006

Behrooz, Majid / Sutrisno, Joko / Zhang, Lingyue / Fuchs, Alan / Gordaninejad, Faramarz

Behavior of magnetorheological elastomers with coated particles

035026

Feng, Ning / Liu, Liwu / Liu, Yanju / Leng, Jinson

A bio-inspired, active morphing skin for camber morphing structures

035023

Ju, Feng / Ling, Shih-Fu

Bioinspired active whisker sensor for geometry detection of high aspect ratio microholes with simultaneous actuation and sensing capability

035010

Lu, Haibao / Lu, Chunrui / Huang, Wei Min / Leng, Jinsong

Chemo-responsive shape memory effect in shape memory polyurethane triggered by inductive release of mechanical energy storage undergoing copper (II) chloride migration

035018

Chatzigeorgiou, George / Chemisky, Yves / Meraghni, Fodil

Computational micro to macro transitions for shape memory alloy composites using periodic homogenization

035009

Hall, J. / Qamar, I. P. S. / Rendall, T. C. S. / Trask, R. S.

A computational model for the flow of resin in self-healing composites

037002

Rodriguez, Gerardo / Casas, Joan R. / Villaba, Sergi

Cracking assessment in concrete structures by distributed optical fiber

035005

Borlandelli, E. / Scarselli, D. / Nespoli, A. / Rigamonti, D. / Bettini, P. / Morandini, M. / Villa, E. / Sala, G. / Quadrio, M.

Design and experimental characterization of a NiTi-based, high-frequency, centripetal peristaltic actuator

035008

Sohn, Jung Woo / Oh, Jong-Seok / Choi, Seung-Bok

Design and novel type of a magnetorheological damper featuring piston bypass hole

035013

Gandhi, Farhan / Hayden, Eric

Design, development, and hover testing of a helicopter rotor blade chord extension morphing system

035024

Amiri Moghadam, Amir Ali / Kouzani, Abbas / Torabi, Keivan / Kaynak, Akif / Shahinpoor, Mohsen

Development of a novel soft parallel robot equipped with polymeric artificial muscles

035017

Leist, Steven K. / Kunkle, Claire / Chong, Parkson Lee-Gau / Zhou, Jack

Dual chamber shape memory alloy unplugging and mixing system coupled to a high pressure optical cell for biophysical studies

035014

Brooke, Robert / Fabretto, Manrico / Vucaj, Nastasja / Zuber, Kamil / Switalska, Eliza / Reeks, Lachlan / Murphy, Peter / Evans, Drew

Effect of oxidant on the performance of conductive polymer films prepared by vacuum vapor phase polymerization for smart window applications

035016

Perez, M. / Boisseau, S. / Gasnier, P. / Willemin, J. / Reboud, J. L.

An electret-based aeroelastic flutter energy harvester

035004

Zhou, Jinzhu / Huang, Jin / Song, Liwei / Zhang, Dan / Ma, Yunchao

Electromechanical co-design and experiment of structurally integrated antenna

037004

Duo, Yi / Costil, Sophie / Pfeiffer, Pierre / Serio, Bruno

Embedding properties of optical fibers integrated into ceramic coatings obtained by wire flame thermal spray

035027

Zhao, Liya / Yang, Yaowen

Enhanced aeroelastic energy harvesting with a beam stiffener

032001

Yong Jung, Sun / Ko, Seong Young / Park, Jong-Oh / Park, Sukho

Enhanced ionic polymer metal composite actuator with porous nafion membrane using zinc oxide particulate leaching method

037007

An, Le / Wang, Fangfang / Cheng, Sibo / Lu, Tongqing / Wang, T. J.

Experimental investigation of the electromechanical phase transition in a dielectric elastomer tube

035006

Liu, Fengli / Alici, Gursel / Zhang, Binbin / Beirne, Stephen / Li, Weihua

Fabrication and characterization of a magnetic micro-actuator based on deformable Fe-doped PDMS artificial cilium using 3D printing

035015

Yu, Yang / Li, Yancheng / Li, Jianchun

Forecasting hysteresis behaviours of magnetorheological elastomer base isolator utilizing a hybrid model based on support vector regression and improved particle swarm optimization

035025

Quaegebeur, N. / Ostiguy, P.-C. / Masson, P.

Hybrid empirical/analytical modeling of guided wave generation by circular piezoceramics

035003

Lou, Jun-Qiang / Wei, Yan-Ding / Yang, Yi-Ling / Xie, Feng-ran

Hybrid PD and effective multi-mode positive position feedback control for slewing and vibration suppression of a smart flexible manipulator

035007

Ning, Nanying / Yan, Bingyue / Liu, Suting / Yao, Yang / Zhang, Liqun / Chan, Tung W. / Nishi, Toshio / Tian, Ming

Improved actuated strain of dielectric elastomer through disruption of hydrogen bonds of thermoplastic polyurethane by adding diaminonaphthalene

032002

Le, Adam Y. / Mills, James K. / Benhabib, Beno

Improved linear ultrasonic motor performance with square-wave based driving-tip trajectory

037003

Kramarenko, E. Yu / Chertovich, A. V. / Stepanov, G. V. / Semisalova, A. S. / Makarova, L. A. / Perov, N. S. / Khokhlov, A. R.

Magnetic and viscoelastic response of elastomers with hard magnetic filler

035002

Yao, Xing-Yan / Yu, Miao / Fu, Jie

Magnetic-enhanced normal force of magnetorheological fluids

035001

Attaran, Abdolhamid / Brummund, Jörg / Wallmersperger, Thomas

Modeling and simulation of the bending behavior of electrically-stimulated cantilevered hydrogels

035021

Savi, Marcelo A. / Pacheco, Pedro Manuel C. L. / Garcia, Mauricio S. / Aguiar, Ricardo A. A. / de Souza, Luís Felipe G. / da Hora, Rodolpho B.

Nonlinear geometric influence on the mechanical behavior of shape memory alloy helical springs

035012

Makihara, Kanjuro / Yamamoto, Yuta / Yoshimizu, Kenji / Horiguchi, Chikahiro / Sakaguchi, Hitoshi / Fujimoto, Katsumi

A novel controller to increase harvested energy from negating vibration-suppression effect

037005

Chiroiu, Veturia / Florinel Ionescu, Marius / Sireteanu, Tudor / Ioan, Rodica / Munteanu, Ligia

On intrinsic time measure in the modeling of cyclic behavior of a Nitinol cubic block

035022

Li, Dongsheng / Ho, Siu-Chun M. / Song, Gangbing / Ren, Liang / Li, Hongnan

A review of damage detection methods for wind turbine blades

033001

Michaud, Hadrien O. / Teixidor, Joan / Lacour, Stéphanie P.

Soft metal constructs for large strain sensor membrane

035020

Ge, Lin / Xuan, Shouhu / Liao, Guojiang / Yin, Tiantian / Gong, Xinglong

Stretchable polyurethane sponge reinforced magnetorheological material with enhanced mechanical properties

037001

Gao, Yingxin / Zhang, Chi

Structure–function relationship of skeletal muscle provides inspiration for design of new artificial muscle

033002

Holschuh, B. / Newman, D.

Two-spring model for active compression textiles with integrated NiTi coil actuators

035011

Publicité

Smart Materials and Structures - v. 24, n. 3 (mars 2015)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Smart Materials and Structures - v. 24, n. 3 (mars 2015)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.