Engineering Structures - octobre 2016

Publié:	octobre 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
De-la-Colina, Jaime / González-Pérez, Carlos A. / Valdés-González, Jesús	Accidental eccentricities, frame shear forces and ductility demands of buildings with uncertainties of stiffness and live load	113-127
Zhou, Xuhong / Liu, Jiepeng / Wang, Xuanding / Chen, Y. Frank	Behavior and design of slender circular tubed-reinforced-concrete columns subjected to eccentric compression	17-28
Camara, A. / Efthymiou, E.	Deck–tower interaction in the transverse seismic response of cable-stayed bridges and optimum configurations	494-506
Del Zoppo, Marta / Di Ludovico, Marco / Prota, Andrea	Deformation capacity of non-conforming r.c. columns under compressive axial load and biaxial bending	480-493
Yamazaki, Shinsuke / Usami, Tsutomu / Nonaka, Tetsuya	Developing a new hysteretic type seismic damper (BRRP) for steel bridges	286-301
Sivapathasundaram, Mayooran / Mahendran, Mahen	Development of fragility curves for localised pull-through failures of thin steel roof battens	64-84
Gribniak, Viktor / Pérez Caldentey, Alejandro / Kaklauskas, Gintaris / Rimkus, Arvydas / Sokolov, Aleksandr	Effect of arrangement of tensile reinforcement on flexural stiffness and cracking	418-428
Karalar, Memduh / Dicleli, Murat	Effect of thermal induced flexural strain cycles on the low cycle fatigue performance of integral bridge steel H-piles	388-404
Lai, Zhichao / Varma, Amit H.	Effective stress-strain relationships for analysis of noncompact and slender filled composite (CFT) members	457-472
Elias, Said / Matsagar, Vasant / Datta, T. K.	Effectiveness of distributed tuned mass dampers for multi-mode control of chimney under earthquakes	1-16
Patruno, L. / Ricci, M. / de Miranda, S. / Ubertini, F.	An efficient approach to the evaluation of wind effects on structures based on recorded pressure fields	207-220
Choi, Soomin / Kim, Yoon Young	Exact matching at a joint of multiply-connected box beams under out-of-plane bending and torsion	96-112
Adawi, Aiham / Youssef, Maged A. / Meshaly, Mohamed E.	Finite element modeling of the composite action between hollowcore slabs and the topping concrete	302-315
Tenchini, Andre / D'Aniello, Mario / Rebelo, Carlos / Landolfo, Raffaele / da Silva, Luís Simões / Lima, Luciano	High strength steel in chevron concentrically braced frames designed according to Eurocode 8	167-185
Bosco, M. / Ferrara, E. / Ghersi, A. / Marino, E. M. / Rossi, P. P.	Improvement of the model proposed by Menegotto and Pinto for steel	442-456
López-López, Andrés / Tomas, Antonio / Sánchez-Olivares, Gregorio	Influence of adjusted models of plastic hinges in nonlinear behaviour of reinforced concrete buildings	245-257
Soufeiani, Leila / Raman, Sudharshan N. / Jumaat, Mohd Zamin Bin / Alengaram, Ubagaram Johnson / Ghadyani, Ghasem / Mendis, Priyan	Influences of the volume fraction and shape of steel fibers on fiber-reinforced concrete subjected to dynamic loading – A review	405-417
Puystiens, Silke / Van Craenenbroeck, Maarten / De Laet, Lars / Van Hemelrijck, Danny / Van Paepegem, Wim / Mollaert, Marijke	Integrated analysis of kinematic form active structures for architectural applications: Design of a representative case study	376-387
Jin, Liu / Li, Dong / Du, Xiuli	Mechanical behavior and size effect of moderate high-strength RC columns under monotonic and cyclic axial compression	269-285
Zhang, Yanyang / Macorini, Lorenzo / Izzuddin, Bassam A.	Mesoscale partitioned analysis of brick-masonry arches	142-166
Versteijlen, W. G. / Metrikine, A. V. / van Dalen, K. N.	A method for identification of an effective Winkler foundation for large-diameter offshore wind turbine support structures based on in-situ measured small-strain soil response and 3D modelling	221-236
Zhou, Q. / Singh, M. P. / Huang, X. Y.	Model reduction and optimal parameters of mid-story isolation systems	36-48
Sarmiento, E. V. / Hendriks, M. A. N. / Geiker, M. R. / Kanstad, T.	Modelling the influence of the fibre structure on the structural behaviour of flowable fibre-reinforced concrete	186-195
Rojas, F. / Anderson, J. C. / Massone, L. M.	A nonlinear quadrilateral layered membrane element with drilling degrees of freedom for the modeling of reinforced concrete walls	521-538
Persson, P. / Persson, K. / Sandberg, G.	Numerical study on reducing building vibrations by foundation improvement	361-375
Mohamed, Nedal / Nehdi, Moncef L.	Rational finite element assisted design of precast steel fibre reinforced concrete pipes	196-206
Yang, Wei / Zheng, Shan-Suo / Zhang, De-Yi / Sun, Long-Fei / Gan, Chuan-Lei	Seismic behaviors of squat reinforced concrete shear walls under freeze-thaw cycles: A pilot experimental study	49-63
Tazarv, Mostafa / Saiidi, M. Saiid	Seismic design of bridge columns incorporating mechanical bar splices in plastic hinge regions	507-520
Areias, P. / Rabczuk, T. / César de Sá, J. / Alves, J. L.	Semi-implicit finite strain constitutive integration and mixed strain/stress control based on intermediate configurations	344-360
Bai, Li / Wadee, M. Ahmer	Slenderness effects in thin-walled I-section struts susceptible to local–global mode interaction	128-141
Zanuy, Carlos	Some remarks on the interaction of long-term effects in deflections of RC members	237-244
Christidis, Konstantinos I. / Vougioukas, Emmanouil / Trezos, Konstantinos G.	Strengthening of non-conforming RC shear walls using different steel configurations	258-268
Mimoto, Tatsuhiko / Sakaki, Takuya / Mihara, Takafumi / Yoshitake, Isamu	Strengthening system using post-tension tendon with an internal anchorage of concrete members	29-35
Hertelé, Stijn / Cosham, Andrew / Roovers, Paul	Structural integrity of corroded girth welds in vintage steel pipelines	429-441
Liu, Huijuan / Zhang, Wei / Yuan, Hao	Structural stability analysis of single-layer reticulated shells with stochastic imperfections	473-479
Pisani, Marco Andrea	Theoretical approach to the evaluation of the load-carrying capacity of the tie rod anchor system in a masonry wall	85-95
Guin, William E. / Wang, Jialai	Theoretical model of adhesively bonded single lap joints with functionally graded adherends	316-332
Madsen, Søren / Lange, Nis P. / Giuliani, Luisa / Jomaas, Grunde / Lazarov, Boyan S. / Sigmund, Ole	Topology optimization for simplified structural fire safety	333-343
Flaga, Andrzej / Kłaput, Renata / Augustyn, Marcin	Wind tunnel tests of two free-standing lighting protection masts in different arrangements with surroundings roof objects and roof conditions	539-548

Informations
sur cette fiche
IssueID
17947
Publié(e) le:
04.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Engineering Structures - octobre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Engineering Structures - octobre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.