Construction and Building Materials - mai 2020

Publié:	mai 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Praneeth, Sai / Guo, Ruonan / Wang, Tao / Dubey, Brajesh K. / Sarmah, Ajit K.	Accelerated carbonation of biochar reinforced cement-fly ash composites: Enhancing and sequestering CO2 in building materials	118363
Zhu, Juncai / Zhang, Kun / Liu, Kefei / Shi, Xianming	Adhesion characteristics of graphene oxide modified asphalt unveiled by surface free energy and AFM-scanned micro-morphology	118404
Sidney Camacho, Jefferson / dos Santos Felipe, Alexsandro / Parsekian, Guilherme Aris / Paz Dornelles, Valério / Nelson Elias, Carlos	Adhesion of ceramic tile coating system on concrete block wall	118278
Koenig, A.	Analysis of air voids in cementitious materials using micro X-ray computed tomography (µXCT)	118313
Wu, Xirong / Zheng, Nanxiang / Kong, Fansheng	The analysis of the factors affecting the macrotexture of bauxite clinker aggregate gradation	118334
Karnati, Sidharth Reddy / Oldham, Daniel / Fini, Elham H. / Zhang, Lifeng	Application of surface-modified silica nanoparticles with dual silane coupling agents in bitumen for performance enhancement	118324
Shu, Qianjin / Wang, Kejin / Yuan, Guanglin / Zhang, Yunfei / Lu, Limin / Liu, Ziyuan	Assessing capacity of corroded angle members in steel structures based on experiment and simulation	118210
Li, T. Y. / Shan, B. / Xiao, Y. / Guo, Y. R. / Zhang, M. P.	Axially loaded single threaded rod glued in glubam joint	118302
Xu, Xiaoqing / Zhou, Xuhong / Liu, Yuqing	Behavior of rubber-sleeved stud shear connectors under fatigue loading	118386
Sturm, Alexander B. / Visintin, Phillip / Oehlers, Deric J.	Blending fibres to enhance the flexural properties of UHPFRC beams	118328
Hoque, Md. Mozammel / Islam, Md Niamul / Islam, Minhazul / Kader, Mohammad Abdul	Bond behavior of reinforcing bars embedded in concrete made with crushed clay bricks as coarse aggregates	118364
Lee, Yong-Jun / Kim, Hyeong-Gook / Kim, Min-Jun / Kim, Dong-Hwan / Kim, Doo-San / Kim, Kil-Hee	Bond performance of reinforced concrete beams with electric arc furnace slag aggregates	118366
Yang, Dong / Yang, Chao / Xie, Jun / Wu, Shaopeng / Ye, Qunshan / Hu, Rui	Combusting behavior and pyrolysis products evaluation of SARA components separated from bitumen	118401
Zuo, Shenghao / Xiao, Jia / Yuan, Qiang	Comparative study on the new-old mortar interface deterioration after wet-dry cycles and heat-cool cycles	118374
Farajzadehha, Soroush / Ziaei Moayed, Reza / Mahdikhani, Mahdi	Comparative study on uniaxial and triaxial strength of plastic concrete containing nano silica	118212
Lederle, Rita / Shepard, Thomas / De La Vega Meza, Vanessa	Comparison of methods for measuring infiltration rate of pervious concrete	118339
Ding, Yao / Yu, Kequan / Mao, Weihao	Compressive performance of all-grade engineered cementitious composites: Experiment and theoretical model	118357
Wei, Ya / Guo, Weiqiang / Wu, Zehong / Gao, Xiang	Computed permeability for cement paste subject to freeze-thaw cycles at early ages	118298
Jafari, Samira / Rots, Jan G. / Esposito, Rita	Core testing method to assess nonlinear shear-sliding behaviour of brick-mortar interfaces: A comparative experimental study	118236
Wang, He / Behnia, Behzad / Buttlar, William G. / Reis, Henrique	Development of two-dimensional micromechanical, viscoelastic, and heterogeneous-based models for the study of block cracking in asphalt pavements	118146
Siddique, Salman / Jang, Jeong Gook	Effect of CFBC ash as partial replacement of PCC ash in alkali-activated material	118383
Ziari, Hassan / Amini, Amir / Goli, Ahmad	The effect of different aging conditions and strain levels on relationship between fatigue life of asphalt binders and mixtures	118345
Li, You / Li, Chuanxi / He, Jun / Gao, Youwei / Hu, Zheng	Effect of functionalized nano-SiO2 addition on bond behavior of adhesively bonded CFRP-steel double-lap joint	118400
Liu, Rui / Xiao, Huigang / Geng, Jishuang / Du, Junjie / Liu, Min	Effect of nano-CaCO3 and nano-SiO2 on improving the properties of carbon fibre-reinforced concrete and their pore-structure models	118297
Khasawneh, Mohammad Ali / Alsheyab, Mohammad Ahmad	Effect of nominal maximum aggregate size and aggregate gradation on the surface frictional properties of hot mix asphalt mixtures	118355
Mansourkhaki, Ali / Ameri, Mahmoud / Habibpour, Mahdi / Daryaee, Daryoosh	The effect of polybutadiene rubber (PBR) on chemical and rheological properties of the binder including RAP	118320
Shen, Dejian / Liu, Xingzuo / Zeng, Xuan / Zhao, Xiaoguang / Jiang, Guoqing	Effect of polypropylene plastic fibers length on cracking resistance of high performance concrete at early age	117874
Williams, Brett / Heard, William / Graham, Steven / Nie, Xu	Effect of specimen geometry on triaxial compressive response of high-strength concrete	118348
Tian, Yaogang / Lu, Dong / Ma, Ronghui / Zhang, Jun / Li, Weiguang / Yan, Xiaohui	Effects of cement contents on the performance of cement asphalt emulsion mixtures with rapidly developed early-age strength	118365
Ming, Xing / Cao, Mingli / Lv, Xingjun / Yin, Hong / Li, Li / Liu, Zixing	Effects of high temperature and post-fire-curing on compressive strength and microstructure of calcium carbonate whisker-fly ash-cement system	118333
Ren, Jiaolong / Wang, Siyuan / Zang, Guangyuan	Effects of recycled aggregate composition on the mechanical characteristics and material design of cement stabilized cold recycling mixtures using road milling materials	118329
Khan, Mehran / Rehman, Abdul / Ali, Majid	Efficiency of silica-fume content in plain and natural fiber reinforced concrete for concrete road	118382
Smyl, Danny	Electrical tomography for characterizing transport properties in cement-based materials: A review	118299
Alhozaimy, Abdulrahman / Hussain, Raja Rizwan / Al-Negheimish, Abdulaziz	Electro-chemical investigation for the effect of rebar source and surface condition on the corrosion rate of reinforced concrete structures under varying corrosive environments	118317
Han, Taihao / Siddique, Ashfia / Khayat, Kamal / Huang, Jie / Kumar, Aditya	An ensemble machine learning approach for prediction and optimization of modulus of elasticity of recycled aggregate concrete	118271
Tiong, Hock Yong / Lim, Siong Kang / Lee, Yee Ling / Ong, Chuan Fang / Yew, Ming Kun	Environmental impact and quality assessment of using eggshell powder incorporated in lightweight foamed concrete	118341
Zhang, Wangxi / Deng, Junjie / He, Chao / Zhang, Jinyi / Yi, Weijian	Experiment and analysis on mechanical properties of Fully-Grouted sleeve connection at elevated temperatures	118314
Mohammed, Azad A. / Rahim, Aso A. Faqe	Experimental behavior and analysis of high strength concrete beams reinforced with PET waste fiber	118350
Vitiello, Veronica / Castelluccio, Roberto / Merino, Mercedes del Río	Experimental research to evaluate the percentage change of thermal and mechanical performances of bricks in historical buildings due to moisture	118107
Stazi, Francesca / Serpilli, Michele / Chiappini, Gianluca / Pergolini, Marianna / Fratalocchi, Evelina / Lenci, Stefano	Experimental study of the mechanical behaviour of a new extruded earth block masonry	118368
Zhang, Wangxi / Wang, Jia / Zhang, Jinyi / Cao, Yadong / Qin, Peng / Yi, Weijian	Experimental study on post-fire performance of half grouted sleeve connection with construction defect	118165
Zhang, Yuxing / Shen, Weiguo / Wu, Miaomiao / Shen, Bo / Li, Minghai / Xu, Gelong / Zhang, Bingliu / Ding, Qingjun / Chen, Xiao	Experimental study on the utilization of copper tailing as micronized sand to prepare high performance concrete	118312
Akbari Hadad, Houman / Erickson, Brad / Nanni, Antonio	Flexural analysis and design of FRCM-strengthened RC beams	118371
Llano-Torre, A. / Martí-Vargas, J. R. / Serna, P.	Flexural and compressive creep behavior of UHPFRC specimens	118254
Muzenski, Scott / Flores-Vivian, Ismael / Sobolev, Konstantin	Hydrophobic modification of ultra-high-performance fiber-reinforced composites with matrices enhanced by aluminum oxide nano-fibers	118354
Margaritis, Alexandros / Soenen, Hilde / Fransen, Erik / Pipintakos, Georgios / Jacobs, Geert / Blom, Johan / van den bergh, Wim	Identification of ageing state clusters of reclaimed asphalt binders using principal component analysis (PCA) and hierarchical cluster analysis (HCA) based on chemo-rheological parameters	118276
Delannoy, Guillaume / Marceau, Sandrine / Glé, Philippe / Gourlay, Etienne / Guéguen-Minerbe, Marielle / Diafi, Dinarzed / Amziane, Sofiane / Farcas, Fabienne	Impact of hemp shiv extractives on hydration of Portland cement	118300
Zhang, Jun / Zhang, Chao / Lu, Yaming / Zheng, Ting / Dong, Zhonghong / Tian, Yaogang / Jia, Yunyi	In-situ recognition of moisture damage in bridge deck asphalt pavement with time-frequency features of GPR signal	118295
Yinfei, Du / Mingxin, Dai / Haibin, Deng / Deyi, Deng / Peifeng, Cheng / Cong, Ma	Incorporating hollow glass microsphere to cool asphalt pavement: Preliminary evaluation of asphalt mastic	118380
Zunino, Franco / Scrivener, Karen	Increasing the kaolinite content of raw clays using particle classification techniques for use as supplementary cementitious materials	118335
Rong, Hui / Wei, Guanqi / Ma, Guowei / Zhang, Ying / Zheng, Xinguo / Zhang, Lei / Xu, Rui	Influence of bacterial concentration on crack self-healing of cement-based materials	118372
Li, Luan / Jing, Hongwen / Gao, Yuan / Hu, Tao / Meng, Yaoyao / Fu, Guangping	Influence of methylcellulose on the impermeability properties of carbon nanotube-based cement pastes at different water-to-cement ratios	118403
Zhang, Dajiang / Zhao, Jihui / Wang, Dongmin / Wang, Yiren / Ma, Xiangdong	Influence of pozzolanic materials on the properties of natural hydraulic lime based mortars	118360
Rostami, Rouhollah / Zarrebini, Mohammad / Sanginabadi, Khaled / Mostofinejad, Davood / Abtahi, Sayyed Mahdi / Fashandi, Hossein	An investigation into influence of physical and chemical surface modification of macro-polypropylene fibers on properties of cementitious composites	118340
Zhou, Xiaodong / Chen, Siyu / Ge, Dongdong / Jin, Dongzhao / You, Zhanping	Investigation of asphalt mixture internal structure consistency in accelerated discrete element models	118272
Li, Zuzhong / Fa, Chunguang / Zhao, Hongyan / Zhang, Yayun / Chen, Huaxin / Xie, Haiwei	Investigation on evolution of bitumen composition and micro-structure during aging	118322
Deng, Z. H. / Huang, H. Q. / Ye, Bailong / Wang, Huaping / Xiang, Ping	Investigation on recycled aggregate concretes exposed to high temperature by biaxial compressive tests	118048
Iskakbayev, A. I. / Teltayev, B. B. / Yestayev, K. Z. / Abu, B. D.	Long-term strength of asphalt concrete and its applications	118325
Yedra Álvarez, E. / Ferrández Vega, D. / Saiz Martínez, P. / Morón Fernández, C.	Low cost system for measuring the evolution of mechanical properties in cement mortars as a function of mixing water	118127
Dong, Zhiqiang / Wu, Gang / Zhao, Xiao-Ling / Zhu, Hong / Wei, Yang / Yan, Zeyu	Mechanical properties of discrete BFRP needles reinforced seawater sea-sand concrete-filled GFRP tubular stub columns	118330
Jiang, Yunhong / Phelipot-Mardelé, Annabelle / Collet, Florence / Lanos, Christophe / Lemke, Manfred / Ansell, Martin / Hussain, Atif / Lawrence, Michael	Moisture buffer, fire resistance and insulation potential of novel bio-clay plaster	118353
de Carvalho Bello, Claudia Brito / Boscato, Giosuè / Meroi, Emilio / Cecchi, Antonella	Non-linear continuous model for three leaf masonry walls	118356
Yang, Xinwen / Shu, Yao / Qian, Dingwei / Zhou, Shunhua / Di, Honggui / He, Chao	The nonlinear dynamical analysis of damaged concrete slab of high speed railway track using the revised Fourier pseudo-spectral method	118336
Ma, Guowei / Salman, Nazar Muhammad / Wang, Li / Wang, Fang	A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing	118305
Zhang, Xuhao / Ahmad, Muhammad Riaz / Chen, Bing	Numerical and experimental investigation of the hygrothermal properties of corn stalk and magnesium phosphate cement (MPC) based bio-composites	118358
Al-musawi, Hajir / Huang, Haidong / Guadagnini, Maurizio / Pilakoutas, Kypros	A numerical study on the effect of restrained shrinkage on rapid hardening plain and recycled clean steel fibre concrete overlays	117723
Suárez, F. / Felipe-Sesé, L. / Díaz, F. A. / Gálvez, J. C. / Alberti, M. G.	On the fracture behaviour of fibre-reinforced gypsum using micro and macro polymer fibres	118347
Moorthi, P. V. P. / Pra Mio, Francesco / Nanthagopalan, Prakash / Ferrara, Liberato	Onset and intensity of shear thickening in cementitious suspensions – A parametrical study	118292
Henriques, Thiago dos S. / Dal Molin, Denise C. / Masuero, Ângela B.	Optical fibers in cementitious composites (LTCM): Analysis and discussion of their influence when randomly arranged	118406
Vasić, M. V. / Pezo, L. L. / Radojević, Z.	Optimization of adobe clay bricks based on the raw material properties (mathematical analysis)	118342
Sukmak, Gampanart / Sukmak, Patimapon / Horpibulsuk, Suksun / Yaowarat, Teerasak / Kunchariyakun, Kittipong / Patarapaiboolchai, Orasa / Arulrajah, Arul	Physical and mechanical properties of natural rubber modified cement paste	118319
Cheng, Jiaji / Zhou, Yue / Ma, Dan / Li, Shaoxiang / Zhang, Feng / Guan, Yu / Qu, Wenjuan / Jin, Yang / Wang, Dong	Preparation and characterization of carbon nanotube microcapsule phase change materials for improving thermal comfort level of buildings	118388
Han, Xiaobin / Yu, Jianying / Cao, Zhilong / Wang, Ruiyang / Du, Wei / He, Peng / Ge, Yangyang	Preparation and properties of silane coupling agent modified zeolite as warm mix additive	118408
Yang, Yuanquan / Liu, Jun / Wang, Baomin / Liu, Runqing	Properties of fly ash blended magnesium potassium phosphate cement cured in presence of sulfuric acid	118349
Hao, Gengren / Wang, Yuhong / Zhao, Kecheng / Huang, Weidong	' Property changes of SBS modified asphalt binders during short-term aging and implications on quality management	118323
Sun, Bin / Zheng, Yang / Li, Zhaoxia	Random beam lattice modeling method for catastrophic crack growth simulation of brittle-like materials	118396
Liu, Yushi / Tian, Weichen / Wang, Mingzhi / Qi, Beimeng / Wang, Wei	Rapid strength formation of on-site carbon fiber reinforced high-performance concrete cured by ohmic heating	118344
Tang, Ning / Yang, Kai-kai / Alrefaei, Yazan / Dai, Jian-Guo / Wu, Li-Mei / Wang, Qing	Reduce VOCs and PM emissions of warm-mix asphalt using geopolymer additives	118338
Zhao, Hui / Liu, Faqi / Yang, Hua	Residual compressive response of concrete produced with both coarse and fine recycled concrete aggregates after thermal exposure	118397
Zhu, He / Hu, Yu / Li, Qingbin / Ma, Rui	Restrained cracking failure behavior of concrete due to temperature and shrinkage	118318
Masoudnia, Reza	State of the art of the effective flange width for composite T-beams	118303
Kenny, Amit / Katz, Amnon	Steel-concrete interface influence on chloride threshold for corrosion – Empirical reinforcement to theory	118376
Zhang, Guangzhe / Konietzky, Heinz / Song, Zhengyang / Zhang, Min	Study of Cerchar abrasive parameters and their relations to intrinsic properties of rocks for construction	118327
Han, Sen / Dong, Shihao / Yin, Yuanyuan / Liu, Mengmei / Liu, Yamin	Study on the effect of hydrated lime content and fineness on asphalt properties	118379
Abid, Sallal R. / Abdul Hussein, Munther L. / Ali, Sajjad H. / Kazem, Ala'a F.	Suggested modified testing techniques to the ACI 544-R repeated drop-weight impact test	118321
Si, Wei / Ma, Biao / Ren, Junping / Hu, Yongping / Zhou, Xueyan / Tian, Yuxiang / Li, Yi	Temperature responses of asphalt pavement structure constructed with phase change material by applying finite element method	118088
Darabi, Masoud K. / Kola, Rashmi / Little, Dallas N. / Garg, Navneet	Time-dependent Drucker-Prager-Cap model coupled with PANDA (Pavement Analysis Using Nonlinear Damage Approach) to predict rutting performance of flexible pavements	118326
Li, Fan / Yang, Yuyou	Understanding the temperature and loading frequency effects on physicochemical interaction ability between mineral filler and asphalt binder using molecular dynamic simulation and rheological experiments	118311

Informations
sur cette fiche
IssueID
35974
Publié(e) le:
05.02.2020
Modifié(e) le:
09.01.2021

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mai 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mai 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.