Construction and Building Materials - novembre 2016

Publié:	novembre 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Sun, Zhe / Behnia, Behzad / Buttlar, William G. / Reis, Henrique	Acoustic emission quantitative evaluation of rejuvenators to restore embrittlement temperatures to oxidized asphalt mixtures	913-923
Apostolidis, P. / Liu, X. / Scarpas, A. / Kasbergen, C. / van de Ven, M. F. C.	Advanced evaluation of asphalt mortar for induction healing purposes	9-25
Vaitkevičius, Vitoldas / Šerelis, Evaldas / Vaičiukynienė, Danutė / Raudonis, Vidas / Rudžionis, Žymantas	Advanced mechanical properties and frost damage resistance of ultra-high performance fibre reinforced concrete	26-31
Kong, X. Z. / Wu, H. / Fang, Q. / Ren, G. M.	Analyses of rigid projectile penetration into UHPCC target based on an improved dynamic cavity expansion model	759-767
Zhu, Jun-Tao / Wang, Xin-Ling / Kang, Xian-Dong / Li, Ke	Analysis of interfacial bonding characteristics of CFRP-concrete under fatigue loading	823-833
Nguyen, Hoang / Carvelli, Valter / Fujii, Toru / Okubo, Kazuya	Cement mortar reinforced with reclaimed carbon fibres, CFRP waste or prepreg carbon waste	321-331
Ding, Yongjie / Huang, Baoshan / Shu, Xiang	Characterizing blending efficiency of plant produced asphalt paving mixtures containing high RAP	172-178
Azahar, Wan Nur Aifa Wan / Jaya, Ramadhansyah Putra / Hainin, Mohd Rosli / Bujang, Mastura / Ngadi, Norzita	Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder	218-226
Zhou, Yang / Hou, Dongshuai / Jiang, Jinyang / Wang, Penggang	Chloride ions transport and adsorption in the nano-pores of silicate calcium hydrate: Experimental and molecular dynamics studies	991-1001
Gaff, Milan / Vokatý, Vojtěch / Babiak, Marian / Bal, Bekir Cihad	Coefficient of wood bendability as a function of selected factors	632-640
Liu, Yunpeng / Wang, Fazhou / Hu, Shuguang / Liu, Muyu	Compatibility of repair materials with substrate low-modulus cement and asphalt mortar (CA mortar)	304-312
Zeng, Yihua / Caspeele, Robby / Matthys, Stijn / Taerwe, Luc	Compressive membrane action in FRP strengthened RC members	442-452
Rajarajeswari, A. / Dhinakaran, G.	Compressive strength of GGBFS based GPC under thermal curing	552-559
Venudharan, Veena / Biligiri, Krishna Prapoorna	Conceptualization of permanent deformation characteristics of rubber modified asphalt binders: Energy-based algorithm and rheological modeling	388-397
Wang, Yan-Bo / Liew, J. Y. Richard	Constitutive model for confined ultra-high strength concrete in steel tube	812-822
Jongvivatsakul, Pitcha / Attachaiyawuth, Anuwat / Pansuk, Withit	A crack-shear slip model of high-strength steel fiber-reinforced concrete based on a push-off test	924-935
Pei, Jianzhong / Cai, Jun / Zou, Daoguang / Zhang, Jiupeng / Li, Rui / Chen, Xiangfeng / Jin, Long	Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement	206-217
Gaël, Blanc / Christelle, Tribout / Gilles, Escadeillas / Sandrine, Geoffroy / Tristan, Soum-Fontez	Determination of the proportion of anhydrous cement using SEM image analysis	157-164
Ali Omar, Hend / Yusoff, Nur Izzi Md. / Sajuri, Zainuddin / Ceylan, Halil / Jakarni, Fauzan Mohd / Ismail, Amiruddin	Determining the effects of aging on halloysite nano-tube modified binders through the pull-off test method	245-252
Chen, Hsuan-Yu / Chen, Chiachung	Determining the emissivity and temperature of building materials by infrared thermometer	130-137
Yan, Yu / Zaniewski, John P. / Hernando, David	Development of a predictive model to estimate permeability of dense-graded asphalt mixture based on volumetrics	426-433
Wang, Boxin / Zhao, Jianyu / Wang, Qing	Distributed models of self-stress value in textile-reinforced self-stressing concrete	286-296
Lee, Euibae / Park, Sangjun / Kim, Yongjic	Drying shrinkage cracking of concrete using dune sand and crushed sand	517-526
Wroblewski, Laura / Hristozov, Dimo / Sadeghian, Pedram	Durability of bond between concrete beams and FRP composites made of flax and glass fibers	800-811
Rahman, A. S. M. A. / Tarefder, Rafiqul A.	Dynamic modulus and phase angle of warm-mix versus hot-mix asphalt concrete	434-441
Gómez-Meijide, Breixo / Ajam, Harith / Lastra-González, Pedro / García, Álvaro	Effect of air voids content on asphalt self-healing via induction and infrared heating	957-966
Guelmine, Layachi / Hadjab, Hadda / Benazzouk, Amar	Effect of elevated temperatures on physical and mechanical properties of recycled rubber mortar	77-85
Zhao, Yulong / Gao, Ying / Zhang, Yiluo / Wang, Yong	Effect of fines on the mechanical properties of composite soil stabilizer-stabilized gravel soil	701-710
Chousidis, N. / Ioannou, I. / Rakanta, E. / Koutsodontis, C. / Batis, G.	Effect of fly ash chemical composition on the reinforcement corrosion, thermal diffusion and strength of blended cement concretes	86-97
Mohsen, Mohamed O. / Al-Nuaimi, Nasser / Abu Al-Rub, Rashid K. / Senouci, Ahmed / Bani-Hani, Khaldoon A.	Effect of mixing duration on flexural strength of multi walled carbon nanotubes cementitious composites	586-598
Paliukaitė, Miglė / Assuras, Michael / Hesp, Simon A. M.	Effect of recycled engine oil bottoms on the ductile failure properties of straight and polymer-modified asphalt cements	190-196
Tan, Yongshan / Yu, Hongfa / Li, Ying / Bi, Wanli / Yao, Xiang	The effect of slag on the properties of magnesium potassium phosphate cement	313-320
Tan, Hongbo / Zou, Fubing / Ma, Baoguo / Liu, Min / Li, Xin / Jian, Shouwei	Effect of sodium tripolyphosphate on adsorbing behavior of polycarboxylate superplasticizer	617-623
Ke, Xing / Zhou, Xian / Wang, Xiaoshu / Wang, Teng / Hou, Haobo / Zhou, Min	Effect of tailings fineness on the pore structure development of cemented paste backfill	345-350
Hu, Liqun / Yun, Di / Liu, Zhuangzhuang / Du, Shaowen / Zhang, Zhen / Bao, Yingbo	Effect of three-dimensional macrotexture characteristics on dynamic frictional coefficient of asphalt pavement surface	720-729
Dąbrowski, Mariusz / Glinicki, Michał A. / Gibas, Karolina / Jóźwiak-Niedźwiedzka, Daria	Effects of calcareous fly ash in blended cements on chloride ions migration and strength of air entrained concrete	1044-1053
Ma, Kunlin / Feng, Jin / Long, Guangcheng / Xie, Youjun	Effects of mineral admixtures on shear thickening of cement paste	609-616
Zhang, Ge / Li, Guoxin / Li, Yanchao	Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement	44-54
Yang, Lu / Wang, Fazhou / Du, Dan / Liu, Peng / Zhang, Wenqin / Hu, Shuguang	Enhanced photocatalytic efficiency and long-term performance of TiO 2 in cementitious materials by activated zeolite fly ash bead carrier	886-893
Elvira-León, J. C. / Chimenos, J. M. / Isábal, C. / Monton, J. / Formosa, J. / Haurie, L.	Epsomite as flame retardant treatment for wood: Preliminary study	936-942
Li, Kai / Stroeven, Piet / Stroeven, Martijn / Sluys, Lambertus J.	Estimating permeability of cement paste using pore characteristics obtained from DEM-based modelling	740-746
Butler, Liam J. / Gibbons, Niamh / He, Ping / Middleton, Campbell / Elshafie, Mohammed Z. E. B.	Evaluating the early-age behaviour of full-scale prestressed concrete beams using distributed and discrete fibre optic sensors	894-912
Zeng, Menglan / Pan, Haozhi / Zhao, Yu / Tian, Wei	Evaluation of asphalt binder containing castor oil-based bioasphalt using conventional tests	537-543
Sivathanu Pillai, C. / Santhakumar, A. R. / Poonguzhali, A. / Pujar, M. G. / Ashok Kumar, J. / Preetha, R. / Kamachi Mudali, U.	Evaluation of microstructural and microchemical aspects of high density concrete exposed to sustained elevated temperature	453-465
Liu, Ning / Peng, Limin / Shi, Chenghua / Lei, Mingfeng	Experimental and model study on dynamic behaviour and fatigue damage of tunnel invert	777-784
Li, Yong / Zhou, Hao / Zhang, Lei / Zhu, Weishen / Li, Shucai / Liu, Jian	Experimental and numerical investigations on mechanical property and reinforcement effect of bolted jointed rock mass	843-856
Hartig, Jens U. / Wehsener, Jörg / Haller, Peer	Experimental and theoretical investigations on moulded wooden tubes made of beech ( Fagus sylvatica L.)	527-536
Meng, Guowang / Gao, Bo / Zhou, Jiamei / Cao, Guodong / Zhang, Qian	Experimental investigation of the mechanical behavior of the steel fiber reinforced concrete tunnel segment	98-107
Dong, Wei / Wu, Zhimin / Zhou, Xiangming / Huang, Hui	Experimental study of equal biaxial-to-uniaxial compressive strength ratio of concrete at early ages	263-273
Faramarzi, Lohrasb / Rasti, Arezou / Abtahi, Seyyed Mehdi	An experimental study of the effect of cement and chemical grouting on the improvement of the mechanical and hydraulic properties of alluvial formations	32-43
Lee, Jong-Han / Cho, Baiksoon / Choi, Eunsoo / Kim, Yong-Hyung	Experimental study of the reinforcement effect of macro-type high strength polypropylene on the flexural capacity of concrete	967-975
Ateeq, Muhammad / Al-Shamma'a, Ahmed	Experimental study on the optimisation of chemical treatment to reduce waste rubber aggregates absorption properties	274-285
Bjurström, Henrik / Gudmarsson, Anders / Ryden, Nils / Starkhammar, Josefin	Field and laboratory stress-wave measurements of asphalt concrete	508-516
Sadati, Seyedhamed / Khayat, Kamal H.	Field performance of concrete pavement incorporating recycled concrete aggregate	691-700
Lin, Feng / Zhong, Qiheng / Zhang, Zhi	Flexural behaviour of RC beams reinforced with compressive steel bars and two-piece enclosed stirrups	55-65
Boulekbache, Bensaid / Hamrat, Mostefa / Chemrouk, Mohamed / Amziane, Sofiane	Flexural behaviour of steel fibre-reinforced concrete under cyclic loading	253-262
Shen, Peiliang / Lu, Linnu / He, Yongjia / Wang, Fazhou / Hu, Shuguang	Hydration monitoring and strength prediction of cement-based materials based on the dielectric properties	179-189
Pei, Jianzhong / Bi, Yanqiu / Zhang, Jiupeng / Li, Rui / Liu, Guozhu	Impacts of aggregate geometrical features on the rheological properties of asphalt mixtures during compaction and service stage	165-171
Dung, N. T. / Unluer, C.	Improving the performance of reactive MgO cement-based concrete mixes	747-758
Zhou, Haijun / Liu, Yuqing / Lu, Youyuan / Dong, Peng / Guo, Bangwen / Ding, Weijian / Xing, Feng / Liu, Tiejun / Dong, Biqin	In-situ crack propagation monitoring in mortar embedded with cement-based piezoelectric ceramic sensors	361-368
Jankovic, Ksenija / Stanković, Srboljub / Bojovic, Dragan / Stojanović, Marko / Antić, Lana	The influence of nano-silica and barite aggregate on properties of ultra high performance concrete	147-156
Ogirigbo, Okiemute Roland / Black, Leon	Influence of slag composition and temperature on the hydration and microstructure of slag blended cements	496-507
Ma, Tao / Zhang, Yao / Zhang, Deyu / Yan, Jinhai / Ye, Qin	Influences by air voids on fatigue life of asphalt mixture based on discrete element method	785-799
Kim, H. K. / Ha, K. A. / Lee, H. K.	Internal-curing efficiency of cold-bonded coal bottom ash aggregate for high-strength mortar	1-8
Ul Haq, Ehsan / Padmanabhan, Sanosh Kunjalukkal / Zubair, Muhammad / Ali, Liaqat / Licciulli, Antonio	Intumescence behaviour of bottom ash based geopolymer mortar through microwave irradiation – As affected by alkali activation	951-956
Saeidi, Hadi / Aghayan, Iman	Investigating the effects of aging and loading rate on low-temperature cracking resistance of core-based asphalt samples using semi-circular bending test	682-690
Wang, Zigeng / Dai, Qingli / Porter, David / You, Zhanping	Investigation of microwave healing performance of electrically conductive carbon fiber modified asphalt mixture beams	1012-1019
Singh, Dharamveer / Girimath, Shashibhushan	Investigation of rheological properties and Superpave PG of PMB mixed with reclaimed asphalt pavement binders	834-842
Shen, Shihui / Lu, Xin / Liu, Liping / Zhang, Cheng	Investigation of the influence of crack width on healing properties of asphalt binders at multi-scale levels	197-205
Zhang, Zhiqing / Wang, Kejin / Liu, Huan / Deng, Zongcai	Key performance properties of asphalt mixtures with recycled concrete aggregate from low strength concrete	711-719
Al-Hdabi, Abbas	Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler	544-551
Schweigler, Michael / Bader, Thomas K. / Hochreiner, Georg / Unger, Gerhard / Eberhardsteiner, Josef	Load-to-grain angle dependence of the embedment behavior of dowel-type fasteners in laminated veneer lumber	1020-1033
Lau, Denvid / Qiu, Qiwen / Zhou, Ao / Chow, Cheuk Lun	Long term performance and fire safety aspect of FRP composites used in building structures	573-585
Shehab, Hamdy K. / Eisa, Ahmed S. / Wahba, Ahmed M.	Mechanical properties of fly ash based geopolymer concrete with full and partial cement replacement	560-565
Tanyildizi, Harun / Yonar, Yavuz	Mechanical properties of geopolymer concrete containing polyvinyl alcohol fiber exposed to high temperature	381-387
Liu, Lin / Wang, Xuecheng / Chen, Huisu / Wan, Chaojun	Microstructure-based modelling of drying shrinkage and microcracking of cement paste at high relative humidity	410-425
Ge, Dongdong / Yan, Kezhen / You, Zhanping / Xu, Hongbin	Modification mechanism of asphalt binder with waste tire rubber and recycled polyethylene	66-76
Wu, Hangtong / Torabian Isfahani, Forood / Jin, Weiliang / Xu, Chen / Redaelli, Elena / Bertolini, Luca	Modification of properties of reinforced concrete through nanoalumina electrokinetic treatment	857-867
Chomicz-Kowalska, Anna / Gardziejczyk, Władysław / Iwański, Mateusz M.	Moisture resistance and compactibility of asphalt concrete produced in half-warm mix asphalt technology with foamed bitumen	108-118
Şahin, Murat / Mahyar, Mahdi / Erdoğan, Sinan T.	Mutual activation of blast furnace slag and a high-calcium fly ash rich in free lime and sulfates	466-475
Ozbakkaloglu, Togay / Gu, Lei / Fallah Pour, Ali	Normal- and high-strength concretes incorporating air-cooled blast furnace slag coarse aggregates: Effect of slag size and content on the behavior	138-146
Abo-El-Enein, S. A. / Hashem, F. S. / Amin, M. S. / Sayed, D. M.	Physicochemical characteristics of cementitious building materials derived from industrial solid wastes	983-990
Assaad, Joseph J. / Issa, Camille A.	Preliminary study on interfacial bond strength due to successive casting lifts of self-consolidating concrete – Effect of thixotropy	351-360
Sadek, Husam / Masad, Eyad / Al-Khalid, Hussain / Sirin, Okan	Probabilistic analysis of fatigue life for asphalt mixtures using the viscoelastic continuum damage approach	227-244
Restuccia, Luciana / Ferro, Giuseppe Andrea	Promising low cost carbon-based materials to improve strength and toughness in cement composites	1034-1043
Piasta, Wojciech / Góra, Jacek / Turkiewicz, Tadeusz	Properties and durability of coarse igneous rock aggregates and concretes	119-129
Haghighatnejad, Nikoo / Mousavi, S. Yasin / Khaleghi, S. Jalal / Tabarsa, Alireza / Yousefi, Saman	Properties of recycled PVC aggregate concrete under different curing conditions	943-950
Khankhaje, Elnaz / Salim, Mohd Razman / Mirza, Jahangir / Hussin, Mohd Warid / Rafieizonooz, Mahdi	Properties of sustainable lightweight pervious concrete containing oil palm kernel shell as coarse aggregate	1054-1065
Chen, Zongping / Xu, Jinjun / Chen, Yuliang / Lui, Eric M.	Recycling and reuse of construction and demolition waste in concrete-filled steel tubes: A review	641-660
Sirivivatnanon, Vute / Mohammadi, James / South, Warren	Reliability of new Australian test methods in predicting alkali silica reaction of field concrete	868-874
Rizwan, Syed Ali / Latif, Wajahat / Bier, Thomas A.	Response of self-consolidating cement paste systems containing Acacia Nilotica Gum as an organic admixture	768-776
Laefer, Debra F. / Erkal, Aykut	Selection, production, and testing of scaled reinforced concrete models and their components	398-409
D'Melo, Dawid / Raju, Sridhar / Bhattacharya, Subhendu / Subramani, Sathish	Self-assembly of amorphous sulphur in bitumen–sulphur mixtures and its impact on properties	976-982
Chen, Huaicheng / Qian, Chunxiang / Huang, Haoliang	Self-healing cementitious materials based on bacteria and nutrients immobilized respectively	297-303
Tsakiridis, P. E. / Samouhos, M. / Peppas, A. / Katsiotis, N. S. / Velissariou, D. / Katsiotis, M. S. / Beazi, M.	Silico-aluminous bottom ash valorisation in cement clinker production: Synthesis, characterization and hydration properties	673-681
Ghaemdoust, Mohammad Reza / Narmashiri, Kambiz / Yousefi, Omid	Structural behaviors of deficient steel SHS short columns strengthened using CFRP	1002-1011
Wang, Min / Wang, Rumin / Yao, Hao / Farhan, Shameel / Zheng, Shuirong / Du, Congcong	Study on the three dimensional mechanism of graphene oxide nanosheets modified cement	730-739
Caro, Silvia / Vega, Natalia / Husserl, Johana / Alvarez, Allex E.	Studying the impact of biomodifiers produced from agroindustrial wastes on asphalt binders	369-380
Liu, Mingle / Zhou, Zonghui / Zhang, Xiuzhi / Yang, Xiangzi / Cheng, Xin	The synergistic effect of nano-silica with blast furnace slag in cement based materials	624-631
Kumar, Kamal / Singh, Raj K. / Kukrety, Aruna / Singh, Anand / Maity, Samir K. / Srivastava, Manoj / Atray, Neeraj / Ray, Siddharth S.	Synthesis of succinimide based novel additives for viscosity reduction of bituminous binder	566-572
Abdullah, A. B. M. / Rice, Jennifer A. / Bhatia, Rahul / Brenkus, Natassia R. / Hamilton, H. R.	A thermal analysis of flexible filler injection for unbonded post-tensioning tendons	599-608
Raut, Ashwin Narendra / Gomez, Christy Pathrose	Thermal and mechanical performance of oil palm fiber reinforced mortar utilizing palm oil fly ash as a complementary binder	476-483
Isfeld, Andrea C. / Moradabadi, Ehsan / Laefer, Debra F. / Shrive, Nigel G.	Uncertainty analysis of the effect of grout injection on the deformation of multi-wythe stone masonry walls	661-672
Savija, Branko / Schlangen, Erik	Use of phase change materials (PCMs) to mitigate early age thermal cracking in concrete: Theoretical considerations	332-344
Rangelov, Milena / Nassiri, Somayeh / Haselbach, Liv / Englund, Karl	Using carbon fiber composites for reinforcing pervious concrete	875-885
Coelho, Mário R. F. / Sena-Cruz, José M. / Neves, Luis A. C. / Pereira, Marta / Cortez, Paulo / Miranda, Tiago	Using data mining algorithms to predict the bond strength of NSM FRP systems in concrete	484-495

Informations
sur cette fiche
IssueID
22603
Publié(e) le:
14.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - novembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - novembre 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.