Construction and Building Materials - November 2016

Published:	November 2016

Articles in this Issue

Author(s)	Title	Page(s)
Sun, Zhe / Behnia, Behzad / Buttlar, William G. / Reis, Henrique	Acoustic emission quantitative evaluation of rejuvenators to restore embrittlement temperatures to oxidized asphalt mixtures	913-923
Apostolidis, P. / Liu, X. / Scarpas, A. / Kasbergen, C. / van de Ven, M. F. C.	Advanced evaluation of asphalt mortar for induction healing purposes	9-25
Vaitkevičius, Vitoldas / Šerelis, Evaldas / Vaičiukynienė, Danutė / Raudonis, Vidas / Rudžionis, Žymantas	Advanced mechanical properties and frost damage resistance of ultra-high performance fibre reinforced concrete	26-31
Kong, X. Z. / Wu, H. / Fang, Q. / Ren, G. M.	Analyses of rigid projectile penetration into UHPCC target based on an improved dynamic cavity expansion model	759-767
Zhu, Jun-Tao / Wang, Xin-Ling / Kang, Xian-Dong / Li, Ke	Analysis of interfacial bonding characteristics of CFRP-concrete under fatigue loading	823-833
Nguyen, Hoang / Carvelli, Valter / Fujii, Toru / Okubo, Kazuya	Cement mortar reinforced with reclaimed carbon fibres, CFRP waste or prepreg carbon waste	321-331
Ding, Yongjie / Huang, Baoshan / Shu, Xiang	Characterizing blending efficiency of plant produced asphalt paving mixtures containing high RAP	172-178
Azahar, Wan Nur Aifa Wan / Jaya, Ramadhansyah Putra / Hainin, Mohd Rosli / Bujang, Mastura / Ngadi, Norzita	Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder	218-226
Zhou, Yang / Hou, Dongshuai / Jiang, Jinyang / Wang, Penggang	Chloride ions transport and adsorption in the nano-pores of silicate calcium hydrate: Experimental and molecular dynamics studies	991-1001
Gaff, Milan / Vokatý, Vojtěch / Babiak, Marian / Bal, Bekir Cihad	Coefficient of wood bendability as a function of selected factors	632-640
Liu, Yunpeng / Wang, Fazhou / Hu, Shuguang / Liu, Muyu	Compatibility of repair materials with substrate low-modulus cement and asphalt mortar (CA mortar)	304-312
Zeng, Yihua / Caspeele, Robby / Matthys, Stijn / Taerwe, Luc	Compressive membrane action in FRP strengthened RC members	442-452
Rajarajeswari, A. / Dhinakaran, G.	Compressive strength of GGBFS based GPC under thermal curing	552-559
Venudharan, Veena / Biligiri, Krishna Prapoorna	Conceptualization of permanent deformation characteristics of rubber modified asphalt binders: Energy-based algorithm and rheological modeling	388-397
Wang, Yan-Bo / Liew, J. Y. Richard	Constitutive model for confined ultra-high strength concrete in steel tube	812-822
Jongvivatsakul, Pitcha / Attachaiyawuth, Anuwat / Pansuk, Withit	A crack-shear slip model of high-strength steel fiber-reinforced concrete based on a push-off test	924-935
Pei, Jianzhong / Cai, Jun / Zou, Daoguang / Zhang, Jiupeng / Li, Rui / Chen, Xiangfeng / Jin, Long	Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement	206-217
Gaël, Blanc / Christelle, Tribout / Gilles, Escadeillas / Sandrine, Geoffroy / Tristan, Soum-Fontez	Determination of the proportion of anhydrous cement using SEM image analysis	157-164
Ali Omar, Hend / Yusoff, Nur Izzi Md. / Sajuri, Zainuddin / Ceylan, Halil / Jakarni, Fauzan Mohd / Ismail, Amiruddin	Determining the effects of aging on halloysite nano-tube modified binders through the pull-off test method	245-252
Chen, Hsuan-Yu / Chen, Chiachung	Determining the emissivity and temperature of building materials by infrared thermometer	130-137
Yan, Yu / Zaniewski, John P. / Hernando, David	Development of a predictive model to estimate permeability of dense-graded asphalt mixture based on volumetrics	426-433
Wang, Boxin / Zhao, Jianyu / Wang, Qing	Distributed models of self-stress value in textile-reinforced self-stressing concrete	286-296
Lee, Euibae / Park, Sangjun / Kim, Yongjic	Drying shrinkage cracking of concrete using dune sand and crushed sand	517-526
Wroblewski, Laura / Hristozov, Dimo / Sadeghian, Pedram	Durability of bond between concrete beams and FRP composites made of flax and glass fibers	800-811
Rahman, A. S. M. A. / Tarefder, Rafiqul A.	Dynamic modulus and phase angle of warm-mix versus hot-mix asphalt concrete	434-441
Gómez-Meijide, Breixo / Ajam, Harith / Lastra-González, Pedro / García, Álvaro	Effect of air voids content on asphalt self-healing via induction and infrared heating	957-966
Guelmine, Layachi / Hadjab, Hadda / Benazzouk, Amar	Effect of elevated temperatures on physical and mechanical properties of recycled rubber mortar	77-85
Zhao, Yulong / Gao, Ying / Zhang, Yiluo / Wang, Yong	Effect of fines on the mechanical properties of composite soil stabilizer-stabilized gravel soil	701-710
Chousidis, N. / Ioannou, I. / Rakanta, E. / Koutsodontis, C. / Batis, G.	Effect of fly ash chemical composition on the reinforcement corrosion, thermal diffusion and strength of blended cement concretes	86-97
Mohsen, Mohamed O. / Al-Nuaimi, Nasser / Abu Al-Rub, Rashid K. / Senouci, Ahmed / Bani-Hani, Khaldoon A.	Effect of mixing duration on flexural strength of multi walled carbon nanotubes cementitious composites	586-598
Paliukaitė, Miglė / Assuras, Michael / Hesp, Simon A. M.	Effect of recycled engine oil bottoms on the ductile failure properties of straight and polymer-modified asphalt cements	190-196
Tan, Yongshan / Yu, Hongfa / Li, Ying / Bi, Wanli / Yao, Xiang	The effect of slag on the properties of magnesium potassium phosphate cement	313-320
Tan, Hongbo / Zou, Fubing / Ma, Baoguo / Liu, Min / Li, Xin / Jian, Shouwei	Effect of sodium tripolyphosphate on adsorbing behavior of polycarboxylate superplasticizer	617-623
Ke, Xing / Zhou, Xian / Wang, Xiaoshu / Wang, Teng / Hou, Haobo / Zhou, Min	Effect of tailings fineness on the pore structure development of cemented paste backfill	345-350
Hu, Liqun / Yun, Di / Liu, Zhuangzhuang / Du, Shaowen / Zhang, Zhen / Bao, Yingbo	Effect of three-dimensional macrotexture characteristics on dynamic frictional coefficient of asphalt pavement surface	720-729
Dąbrowski, Mariusz / Glinicki, Michał A. / Gibas, Karolina / Jóźwiak-Niedźwiedzka, Daria	Effects of calcareous fly ash in blended cements on chloride ions migration and strength of air entrained concrete	1044-1053
Ma, Kunlin / Feng, Jin / Long, Guangcheng / Xie, Youjun	Effects of mineral admixtures on shear thickening of cement paste	609-616
Zhang, Ge / Li, Guoxin / Li, Yanchao	Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement	44-54
Yang, Lu / Wang, Fazhou / Du, Dan / Liu, Peng / Zhang, Wenqin / Hu, Shuguang	Enhanced photocatalytic efficiency and long-term performance of TiO 2 in cementitious materials by activated zeolite fly ash bead carrier	886-893
Elvira-León, J. C. / Chimenos, J. M. / Isábal, C. / Monton, J. / Formosa, J. / Haurie, L.	Epsomite as flame retardant treatment for wood: Preliminary study	936-942
Li, Kai / Stroeven, Piet / Stroeven, Martijn / Sluys, Lambertus J.	Estimating permeability of cement paste using pore characteristics obtained from DEM-based modelling	740-746
Butler, Liam J. / Gibbons, Niamh / He, Ping / Middleton, Campbell / Elshafie, Mohammed Z. E. B.	Evaluating the early-age behaviour of full-scale prestressed concrete beams using distributed and discrete fibre optic sensors	894-912
Zeng, Menglan / Pan, Haozhi / Zhao, Yu / Tian, Wei	Evaluation of asphalt binder containing castor oil-based bioasphalt using conventional tests	537-543
Sivathanu Pillai, C. / Santhakumar, A. R. / Poonguzhali, A. / Pujar, M. G. / Ashok Kumar, J. / Preetha, R. / Kamachi Mudali, U.	Evaluation of microstructural and microchemical aspects of high density concrete exposed to sustained elevated temperature	453-465
Liu, Ning / Peng, Limin / Shi, Chenghua / Lei, Mingfeng	Experimental and model study on dynamic behaviour and fatigue damage of tunnel invert	777-784
Li, Yong / Zhou, Hao / Zhang, Lei / Zhu, Weishen / Li, Shucai / Liu, Jian	Experimental and numerical investigations on mechanical property and reinforcement effect of bolted jointed rock mass	843-856
Hartig, Jens U. / Wehsener, Jörg / Haller, Peer	Experimental and theoretical investigations on moulded wooden tubes made of beech ( Fagus sylvatica L.)	527-536
Meng, Guowang / Gao, Bo / Zhou, Jiamei / Cao, Guodong / Zhang, Qian	Experimental investigation of the mechanical behavior of the steel fiber reinforced concrete tunnel segment	98-107
Dong, Wei / Wu, Zhimin / Zhou, Xiangming / Huang, Hui	Experimental study of equal biaxial-to-uniaxial compressive strength ratio of concrete at early ages	263-273
Faramarzi, Lohrasb / Rasti, Arezou / Abtahi, Seyyed Mehdi	An experimental study of the effect of cement and chemical grouting on the improvement of the mechanical and hydraulic properties of alluvial formations	32-43
Lee, Jong-Han / Cho, Baiksoon / Choi, Eunsoo / Kim, Yong-Hyung	Experimental study of the reinforcement effect of macro-type high strength polypropylene on the flexural capacity of concrete	967-975
Ateeq, Muhammad / Al-Shamma'a, Ahmed	Experimental study on the optimisation of chemical treatment to reduce waste rubber aggregates absorption properties	274-285
Bjurström, Henrik / Gudmarsson, Anders / Ryden, Nils / Starkhammar, Josefin	Field and laboratory stress-wave measurements of asphalt concrete	508-516
Sadati, Seyedhamed / Khayat, Kamal H.	Field performance of concrete pavement incorporating recycled concrete aggregate	691-700
Lin, Feng / Zhong, Qiheng / Zhang, Zhi	Flexural behaviour of RC beams reinforced with compressive steel bars and two-piece enclosed stirrups	55-65
Boulekbache, Bensaid / Hamrat, Mostefa / Chemrouk, Mohamed / Amziane, Sofiane	Flexural behaviour of steel fibre-reinforced concrete under cyclic loading	253-262
Shen, Peiliang / Lu, Linnu / He, Yongjia / Wang, Fazhou / Hu, Shuguang	Hydration monitoring and strength prediction of cement-based materials based on the dielectric properties	179-189
Pei, Jianzhong / Bi, Yanqiu / Zhang, Jiupeng / Li, Rui / Liu, Guozhu	Impacts of aggregate geometrical features on the rheological properties of asphalt mixtures during compaction and service stage	165-171
Dung, N. T. / Unluer, C.	Improving the performance of reactive MgO cement-based concrete mixes	747-758
Zhou, Haijun / Liu, Yuqing / Lu, Youyuan / Dong, Peng / Guo, Bangwen / Ding, Weijian / Xing, Feng / Liu, Tiejun / Dong, Biqin	In-situ crack propagation monitoring in mortar embedded with cement-based piezoelectric ceramic sensors	361-368
Jankovic, Ksenija / Stanković, Srboljub / Bojovic, Dragan / Stojanović, Marko / Antić, Lana	The influence of nano-silica and barite aggregate on properties of ultra high performance concrete	147-156
Ogirigbo, Okiemute Roland / Black, Leon	Influence of slag composition and temperature on the hydration and microstructure of slag blended cements	496-507
Ma, Tao / Zhang, Yao / Zhang, Deyu / Yan, Jinhai / Ye, Qin	Influences by air voids on fatigue life of asphalt mixture based on discrete element method	785-799
Kim, H. K. / Ha, K. A. / Lee, H. K.	Internal-curing efficiency of cold-bonded coal bottom ash aggregate for high-strength mortar	1-8
Ul Haq, Ehsan / Padmanabhan, Sanosh Kunjalukkal / Zubair, Muhammad / Ali, Liaqat / Licciulli, Antonio	Intumescence behaviour of bottom ash based geopolymer mortar through microwave irradiation – As affected by alkali activation	951-956
Saeidi, Hadi / Aghayan, Iman	Investigating the effects of aging and loading rate on low-temperature cracking resistance of core-based asphalt samples using semi-circular bending test	682-690
Wang, Zigeng / Dai, Qingli / Porter, David / You, Zhanping	Investigation of microwave healing performance of electrically conductive carbon fiber modified asphalt mixture beams	1012-1019
Singh, Dharamveer / Girimath, Shashibhushan	Investigation of rheological properties and Superpave PG of PMB mixed with reclaimed asphalt pavement binders	834-842
Shen, Shihui / Lu, Xin / Liu, Liping / Zhang, Cheng	Investigation of the influence of crack width on healing properties of asphalt binders at multi-scale levels	197-205
Zhang, Zhiqing / Wang, Kejin / Liu, Huan / Deng, Zongcai	Key performance properties of asphalt mixtures with recycled concrete aggregate from low strength concrete	711-719
Al-Hdabi, Abbas	Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler	544-551
Schweigler, Michael / Bader, Thomas K. / Hochreiner, Georg / Unger, Gerhard / Eberhardsteiner, Josef	Load-to-grain angle dependence of the embedment behavior of dowel-type fasteners in laminated veneer lumber	1020-1033
Lau, Denvid / Qiu, Qiwen / Zhou, Ao / Chow, Cheuk Lun	Long term performance and fire safety aspect of FRP composites used in building structures	573-585
Shehab, Hamdy K. / Eisa, Ahmed S. / Wahba, Ahmed M.	Mechanical properties of fly ash based geopolymer concrete with full and partial cement replacement	560-565
Tanyildizi, Harun / Yonar, Yavuz	Mechanical properties of geopolymer concrete containing polyvinyl alcohol fiber exposed to high temperature	381-387
Liu, Lin / Wang, Xuecheng / Chen, Huisu / Wan, Chaojun	Microstructure-based modelling of drying shrinkage and microcracking of cement paste at high relative humidity	410-425
Ge, Dongdong / Yan, Kezhen / You, Zhanping / Xu, Hongbin	Modification mechanism of asphalt binder with waste tire rubber and recycled polyethylene	66-76
Wu, Hangtong / Torabian Isfahani, Forood / Jin, Weiliang / Xu, Chen / Redaelli, Elena / Bertolini, Luca	Modification of properties of reinforced concrete through nanoalumina electrokinetic treatment	857-867
Chomicz-Kowalska, Anna / Gardziejczyk, Władysław / Iwański, Mateusz M.	Moisture resistance and compactibility of asphalt concrete produced in half-warm mix asphalt technology with foamed bitumen	108-118
Şahin, Murat / Mahyar, Mahdi / Erdoğan, Sinan T.	Mutual activation of blast furnace slag and a high-calcium fly ash rich in free lime and sulfates	466-475
Ozbakkaloglu, Togay / Gu, Lei / Fallah Pour, Ali	Normal- and high-strength concretes incorporating air-cooled blast furnace slag coarse aggregates: Effect of slag size and content on the behavior	138-146
Abo-El-Enein, S. A. / Hashem, F. S. / Amin, M. S. / Sayed, D. M.	Physicochemical characteristics of cementitious building materials derived from industrial solid wastes	983-990
Assaad, Joseph J. / Issa, Camille A.	Preliminary study on interfacial bond strength due to successive casting lifts of self-consolidating concrete – Effect of thixotropy	351-360
Sadek, Husam / Masad, Eyad / Al-Khalid, Hussain / Sirin, Okan	Probabilistic analysis of fatigue life for asphalt mixtures using the viscoelastic continuum damage approach	227-244
Restuccia, Luciana / Ferro, Giuseppe Andrea	Promising low cost carbon-based materials to improve strength and toughness in cement composites	1034-1043
Piasta, Wojciech / Góra, Jacek / Turkiewicz, Tadeusz	Properties and durability of coarse igneous rock aggregates and concretes	119-129
Haghighatnejad, Nikoo / Mousavi, S. Yasin / Khaleghi, S. Jalal / Tabarsa, Alireza / Yousefi, Saman	Properties of recycled PVC aggregate concrete under different curing conditions	943-950
Khankhaje, Elnaz / Salim, Mohd Razman / Mirza, Jahangir / Hussin, Mohd Warid / Rafieizonooz, Mahdi	Properties of sustainable lightweight pervious concrete containing oil palm kernel shell as coarse aggregate	1054-1065
Chen, Zongping / Xu, Jinjun / Chen, Yuliang / Lui, Eric M.	Recycling and reuse of construction and demolition waste in concrete-filled steel tubes: A review	641-660
Sirivivatnanon, Vute / Mohammadi, James / South, Warren	Reliability of new Australian test methods in predicting alkali silica reaction of field concrete	868-874
Rizwan, Syed Ali / Latif, Wajahat / Bier, Thomas A.	Response of self-consolidating cement paste systems containing Acacia Nilotica Gum as an organic admixture	768-776
Laefer, Debra F. / Erkal, Aykut	Selection, production, and testing of scaled reinforced concrete models and their components	398-409
D'Melo, Dawid / Raju, Sridhar / Bhattacharya, Subhendu / Subramani, Sathish	Self-assembly of amorphous sulphur in bitumen–sulphur mixtures and its impact on properties	976-982
Chen, Huaicheng / Qian, Chunxiang / Huang, Haoliang	Self-healing cementitious materials based on bacteria and nutrients immobilized respectively	297-303
Tsakiridis, P. E. / Samouhos, M. / Peppas, A. / Katsiotis, N. S. / Velissariou, D. / Katsiotis, M. S. / Beazi, M.	Silico-aluminous bottom ash valorisation in cement clinker production: Synthesis, characterization and hydration properties	673-681
Ghaemdoust, Mohammad Reza / Narmashiri, Kambiz / Yousefi, Omid	Structural behaviors of deficient steel SHS short columns strengthened using CFRP	1002-1011
Wang, Min / Wang, Rumin / Yao, Hao / Farhan, Shameel / Zheng, Shuirong / Du, Congcong	Study on the three dimensional mechanism of graphene oxide nanosheets modified cement	730-739
Caro, Silvia / Vega, Natalia / Husserl, Johana / Alvarez, Allex E.	Studying the impact of biomodifiers produced from agroindustrial wastes on asphalt binders	369-380
Liu, Mingle / Zhou, Zonghui / Zhang, Xiuzhi / Yang, Xiangzi / Cheng, Xin	The synergistic effect of nano-silica with blast furnace slag in cement based materials	624-631
Kumar, Kamal / Singh, Raj K. / Kukrety, Aruna / Singh, Anand / Maity, Samir K. / Srivastava, Manoj / Atray, Neeraj / Ray, Siddharth S.	Synthesis of succinimide based novel additives for viscosity reduction of bituminous binder	566-572
Abdullah, A. B. M. / Rice, Jennifer A. / Bhatia, Rahul / Brenkus, Natassia R. / Hamilton, H. R.	A thermal analysis of flexible filler injection for unbonded post-tensioning tendons	599-608
Raut, Ashwin Narendra / Gomez, Christy Pathrose	Thermal and mechanical performance of oil palm fiber reinforced mortar utilizing palm oil fly ash as a complementary binder	476-483
Isfeld, Andrea C. / Moradabadi, Ehsan / Laefer, Debra F. / Shrive, Nigel G.	Uncertainty analysis of the effect of grout injection on the deformation of multi-wythe stone masonry walls	661-672
Savija, Branko / Schlangen, Erik	Use of phase change materials (PCMs) to mitigate early age thermal cracking in concrete: Theoretical considerations	332-344
Rangelov, Milena / Nassiri, Somayeh / Haselbach, Liv / Englund, Karl	Using carbon fiber composites for reinforcing pervious concrete	875-885
Coelho, Mário R. F. / Sena-Cruz, José M. / Neves, Luis A. C. / Pereira, Marta / Cortez, Paulo / Miranda, Tiago	Using data mining algorithms to predict the bond strength of NSM FRP systems in concrete	484-495

About this
data sheet
IssueID
22603
Published on:
14/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.