Composite Structures - novembre 2023

Publié:	novembre 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Zhang, Yuwu / Cao, Shunze / Liu, Guoliang	3D printed bending-stretching coupled non-self-similar hierarchical cellular topology under in-plane loading	117442
Wang, Zhenyu / Zhang, Xingle / Cheng, Changli / Song, Xinyu / Hua, Chenxi / Feng, Liyang / Yang, Junyi / Jiang, Jing / Liu, Yu	3D printed epoxy composite microsandwich with high strength, toughness, and EMI shielding performances	117456
Tang, Jianbo / Wang, Jun / Xie, Ximing / Zhou, Xin / Yan, Wei / Li, Shuxin / Yu, Haitao / Xin, Shiqing / Xu, Jian	3D winding path modeling of overwrapped pressure vessels with novel mesh-based directional projection and normal adaptive convex helix algorithms	117447
Lin, Jia-Xiang / Chen, Gai / Pan, Hong-shu / Wang, Ying-chang / Guo, Yong-Chang / Jiang, Zhen-xing	Analysis of stress-strain behavior in engineered geopolymer composites reinforced with hybrid PE-PP fibers: A focus on cracking characteristics	117437
Lü, Jun-Peng / Mei, Hai / Zu, Liping / Ruan, Chenglin / Liu, Lisheng / Chu, Liangliang	The asymptotic homogenization evaluation of effective mechanical property of the C/C-ZrC composite by the reconstruction technique	117408
Tang, Hongyuan / Wang, Huixiang / Liu, Ye / Bian, Yu / Gao, Zhongwei	Axial compressive property of square and rectangular UHPC-filled duplex stainless steel tube stub columns	117492
Jiang, Dong / Qian, Hui / Wang, Yusheng / Zheng, Jincheng / Zhang, Dahai / Li, Qiyu	Data driven prediction of fatigue residual stiffness of braided ceramic matrix composites based on Latent-ODE	117504
Montanari, Matteo / Brighenti, Roberto / Spagnoli, Andrea	Defect sensitivity mitigation in the compressive mechanical response of two-phase lattice metamaterials	117501
Zhang, Qinzhao / Zhou, Wei / Pang, Liang / Xiao, Peng / Luo, Heng / Zhou, Liangjun / Li, Yang	Design and numerical studies of microwave absorption structure based on the hybrid weave of fibers with different dielectric properties	117460
Zhou, Lilin	Distorted dynamic similitude of sandwich FGM plates and shells in high-temperature environments	117495
de Paula Santos, Luis Felipe / Monticeli, Francisco Maciel / Ribeiro, Bruno / Costa, Michelle Leali / Alderliesten, René / Botelho, Edson Cocchieri	Does carbon nanotube buckypaper affect mode-I and II interlaminar fracture toughness under quasi-static loading?	117507
Gao, Liang / Li, Zhaoxin / Jiang, Shuai / Xie, Botao	Dynamic impact behavior and notched fatigue life of GLARE laminates	117449
Ma, Hongwei / Sun, Wei / Ji, Wenhao / Zhang, Yu / Liu, Xiaofeng / Liu, Honghao	Dynamic modeling and vibration analysis of planar pipeline with partial constrained layer damping treatment: Theoretical and experimental studies	117476
Chen, Jiayu / Bai, Jinyu / Zu, SiJie / Lin, Zhe / Yang, Shanglu	Effect of interfacial thermal history on bonding mechanism of laser assisted joining of QP980-CFRTP with adjustable flat-top rectangular laser beam	117488
Dincer, Melisa / Karci, Emir / Halil Sahin, Ibrahim / Emre, Cagin / Ozkendirci, Basak / Ozden Yenigun, Elif / Cebeci, Hulya	Effect of Linear Density on the Mechanical Properties of 3D Spacer Composites with Improved Manufacturing Quality	117518
Van Bavel, B. / Zhao, Y. / Faes, M. G. R. / Vandepitte, D. / Moens, D.	Efficient quantification of composite spatial variability: A multiscale framework that captures intercorrelation	117462
Qin, Shangan / Deng, Xiaolin / Yang, Fumo / Lu, Qi	Energy absorption characteristics and negative Poisson's ratio effect of axisymmetric tetrachiral honeycombs under in-plane impact	117493
Hosseini, Shahram / Farrokhabadi, Amin / Chronopoulos, Dimitrios	Experimental and numerical analysis of shape memory sinusoidal lattice structure: Optimization through fusing an artificial neural network to a genetic algorithm	117454
Wang, Chenguang / Song, Xuyuan / Zang, Jian / Zhang, Yewei	Experimental and theoretical investigation on vibration of laminated composite conical-cylindrical-combining shells with elastic foundation in hygrothermal environment	117470
Fu, Hao / Huang, Xu / Kaewunruen, Sakdirat	Experimental investigations into nonlinear dynamic behaviours of triply periodical minimal surface structures	117510
Moorthy, Venkatesan / Marappan, Karthikeyan	Experimental study on delamination identification in tapered laminated composite plates using damage detection models	117494
Cakir, Ferit / Aydin, M. Raci / Acar, Volkan / Aksar, Bora / Akkaya, Hasan Cem	An experimental study on RC beams shear-strengthened with Intraply Hybrid U-Jackets Composites monitored by digital image correlation (DIC)	117503
Zhang, Zhenhua / Zhang, Zhan / Huang, Xiufeng	Experimental study on the impact response of the polyurea-coated 3D auxetic lattice sandwich panels subjected to air explosion	117500
Verma, Vivek / Singh, Swati / Pal, Kaushik	Exploring the potential of Mg-Zn-Mn-Ca/ZnO composites as a biodegradable alternative for fracture fixation: microstructural, mechanical, and in-vitro biocompatibility analysis	117431
Cinar, Kenan / Inam, Okan	Failure prediction of syntactic foam core L-shaped sandwich structures	117465
Le, Hung / Yavas, Denizhan / Wu, Dazhong	Flexural and fracture behavior of additively manufactured carbon fiber reinforced polymer composites with bioinspired Bouligand meso-structures	117436
Li, Jiajian / Cao, Shuai / Song, Weidong	Flexural behavior of cementitious backfill composites reinforced by various 3D printed polymeric lattices	117489
Friedrich, Leandro F. / Iturrioz, Ignacio / Colpo, Angélica B. / Vantadori, Sabrina	Fracture failure of quasi-brittle materials by a novel peridynamic model	117402
Dondish, A. / Li, L. / Melenka, G. W.	Full-field deformation and failure analysis for compression after impact of carbon fibre reinforced polymer laminates	117469
Bui, Tuan Anh / Kim, Jun-Sik / Park, Junyoung	Geometrically nonlinear static deflection of stiffened composite plates: A fifth-order equivalent model	117508
Pei, Xuan / Wang, Linnan / Wu, Lina / Lei, Haoyuan / Feng, Pin / Fan, Chen / Zhou, Zhigang / Wang, Lei / Liu, Ming / Zhou, Changchun / Kong, Qingquan / Fan, Yujiang	Heterogeneous porosity design triggered stress reorganization to avoid intervertebral cage subsidence and promote spinal fusion	117516
Wang, Fei / Li, Li / Jiang, Xinli / Tang, Haishan / Wang, Xuelin / Hu, Yujin	High damping and modulus of aluminum matrix composites reinforced with carbon nanotube skeleton inspired by diamond lattice	117451
Liu, Guang / Liu, Ji-ke / Lu, Zhong-Rong	High-precision semi-analytical solution for the quasi-periodic nanobeam system based on the weight time-domain minimum residual method	117457
Franciszczak, P. / Smoliński, J.	Hybrid all-cellulose reinforcement in polypropylene matrix biocomposites for injection moulding - influence of particle geometry and volume fraction on hybrid effect	117450
Zhang, Yi / Pan, Yang / Han, Dong / Jiang, Wei Zhong / Jiang, Wei / Zhang, Xue Gang / Teng, Xing Chi / Ni, Xi Hai / Ren, Xin	A hybrid design for bending and stretching dominated metamaterial with tailorable thermal expansion	117474
Rahbek, Dennis B. / Roberson, Gwyn E. / Johnsen, Bernt B.	Improved ballistic limit velocity from filament-wound fibres as composite cover on ceramic tiles	117452
Calvo, José Vicente / Quiñonero-Moya, Antonio Ramón / Feito, Norberto / Miguélez, María Henar / Giner, Eugenio	Influence of distributed out-of-plane waviness defects on the mechanical behavior of CFRP laminates	117498
Xiao, Junjie / Zhang, Kaifu / Liu, Bo / Cheng, Hui / Feng, Mengfei / Liang, Biao	Influence of temperature on the SMA-PDMS interfacial bond behavior and its modeling with temperature dependent trapezoidal cohesive law	117513
Cao, Sipeng / Li, Yuan / Zhang, Kaifu / Hou, Guoyi / Luo, Bin / Liu, Shunuan / Long, Tengfei / Liu, Ping	Investigation of CFRP damages induced by the interface high temperature and mixed tool wear mechanism in drilling of thin-walled CFRP /Ti stacks	117438
Chen, Qiang / Du, Xiaoxiao / Wang, Wei / Chatzigeorgiou, George / Meraghni, Fodil / Zhao, Gang	Isogeometric homogenization of viscoelastic polymer composites via correspondence principle	117475
Wang, Ben / Yan, Qu / Bai, Cuiping / Yang, Yunze / Fan, Hualin	Manufacturing and flexural testing of woven lattice sandwich-ply laminate composites	117440
Wu, Tianwei / Li, Gen / Xue, Yousong / Gu, Bohong / Hu, Dongmei / Sun, Baozhong	Mechanical-electrical coupling behaviors of 3-D carbon fiber angle-interlock woven composites under quasi-static and cyclic tension	117466
Li, Ziqi / Li, Xin / Chen, Yang / Zhang, Chao	A mechanics-informed machine learning approach for modeling the elastoplastic behavior of fiber-reinforced composites	117473
Wemming, Hannes / Lindström, Stefan B. / Johansson, Lars / Kapidžić, Zlatan	Modelling and experimental parameter identification for fasteners in composite–aluminium bolted structures	117464
Hu, Tiannan / Wang, Yaguang / Zhang, Heng / Li, Hao / Ishida, Naoyuki / Sasaki, Takamitsu / Furuta, Kozo / Izui, Kazuhiro / Nishiwaki, Shinji	Multiscale topological design of coated structures with layer-wise bi-material lattice infill for minimum dynamic compliance	117468
Qi, Zhenchao / Yao, Chenxi / Chen, Wenliang	Nano-coated composite fastener: Structure health monitoring based on magneto-mechanical effect	117446
Cho, J. R.	Natural element hierarchical models for static and free vibration analysis of cylindrical panels	117448
Zhang, Xuyu / Xie, Yi Min / Li, Qing / Wang, Cong / Zhuang, Zicheng / Li, He / Zhou, Shiwei	A nodal-based optimization method for the design of continuous fiber-reinforced structures	117455
Ni, Zhi / Fan, Yucheng / Hang, Ziyan / Yang, Jinlong / Feng, Chuang / Yang, Jie	Nonlinear dynamics of ionic liquid enhanced soft composite membrane under electro-mechanical loading	117502
Feng, Jingjing / Yu, Huajian / Li, Yanjie / Zhang, Wei	Nonlinear oscillation and detection sensitivity of clamped carbon nanotube mass sensor under thermal load	117444
Kolpakov, A. G.	On the strength of many-layer fiber-reinforced plates	117443
Wen, Zhuoxin / Hou, Chi / Zhao, MeiYing / Wan, XiaoPeng	A peridynamic model for coupled thermo-mechanical-oxygenic analysis of C/C composites with SiC coating	117441
Wu, Wen-Ping / Li, Ze-Zheng / Chu, Xihua	Peridynamics study on crack propagation and failure behavior in Ni/Ni3Al bi-material structure	117453
Yue, Qiang / Wang, Qiao / Tian, Wenxiang / Rabczuk, Timon / Zhou, Wei / Ma, Gang / Zhuang, Xiaoying / Chang, Xiaolin	A phase-field lattice model (PFLM) for fracture problem: Theory and application in composite materials	117432
Matsunaga, Wataru / Imai, Satoshi / Mizutani, Yoshihiro / Yasuoka, Tetsuo / Todoroki, Akira	Qualitative evaluation of the moisture absorption rate in adhesive layers of carbon fiber reinforced plastic joints using electromagnetic induction testing	117467
Tınastepe, Mehmet Talha / Burak Kaybal, Halil / Ulus, Hasan / Erdal, Mehmet Okan / Çetin, Mehmet Emin / Avcı, Ahmet	Quasi-Static tensile loading performance of Bonded, Bolted, and hybrid Bonded-Bolted Carbon-to-Carbon composite Joints: Effect of recycled polystyrene nanofiber interleaving	117445
Zhao, Teng / Shen, Yongxing	A reduced-order peridynamic model for predicting nonlocal heat conduction in nanocomposites	117477
Huang, Xiaoxu / Zhou, Yingwu / Li, Weiwen / Hu, Biao / Zhang, Jiaxin	Reliability-based design of FRP shear strengthened reinforced concrete Beams: Guidelines assessment and calibration	117421
Xie, Fan / Dai, Xiyi / Zhuo, Longhai / Dai, Qiyang / He, Chaobin / Lu, Zhaoqing	Robust BNNS/ANF aerogel skeleton-based PEG composite phase change materials with high latent heat for efficient thermal management	117479
Zhao, Zhimin / Chen, Nian-Zhong	Spatial-temporal graph convolutional networks (STGCN) based method for localizing acoustic emission sources in composite panels	117496
Xinyi, Lai / Yifeng, Zhong / Rong, Liu / Evrard, Irakoze Alain	Static and global buckling analysis of sandwich panels with improved star-shaped honeycomb using VAM-based downscaling model	117458
Hong, Hyunsoo / Jeong, Kwang Il / On, Seung Yoon / Kim, Wonvin / Kim, Seong Su	Structural optimization of an arch-structured epoxy/rubber composite vibration isolator using deep Q-value neural network reinforcement learning	117506
Gu, Junjie / Yan, Shi / Zhang, Lan / Su, Chenmin / Yin, Binglun / Qu, Shaoxing	Superior underwater sound-absorbing metasurface based on wave mode conversion and cavity-plate coupling resonance	117459
Zeng, Rui / Xu, Mengchuan / Wang, Yitian / Guo, Jinxin / Zhang, Ruixiong / Yan, Bokang / Zhao, Zeang / Wang, Panding / Duan, Shengyu / Lei, Hongshuai	Three-dimensional bi-metallic lattice with multi-directional zero thermal expansion	117499
Li, Ming / Zhang, Lu / Tao, Yanming / Bao, Wenyi / Fan, Hualin	Two-level homogenization and multi-failure analyses of hierarchical lattice stiffened cylinder	117487
D'Antino, Tommaso / Pisani, Marco A.	Use of bending test to determine the tensile strength and elastic modulus of GFRP bars	117424
Guan, Chengyu / Li, Huimin / Yang, Zhiyong / Zhang, Yuyang / Fang, Daining	Vibration and damping of carbon fiber reinforced polymer orthogonal lattice truss sandwich panels manufactured by a new manufacturing process	117463

Informations
sur cette fiche
IssueID
70396
Publié(e) le:
03.09.2023
Modifié(e) le:
03.09.2023

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - novembre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - novembre 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.