Composite Structures - février 2014

Publié:	février 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Kamiński, Marcin / Kazimierczak, Marlena	2D versus 3D probabilistic homogenization of the metallic fiber-reinforced composites by the perturbation-based stochastic Finite Element Method	1009-1018
Carra, Guglielmo / Carvelli, Valter	Ageing of pultruded glass fibre reinforced polymer composites exposed to combined environmental agents	1019-1026
Liu, Ke / Yang, Zhimao / Takagi, Hitoshi	Anisotropic thermal conductivity of unidirectional natural abaca fiber composites as a function of lumen and cell wall structure	987-991
Fazzolari, F. A. / Banerjee, J. R.	Axiomatic/asymptotic PVD/RMVT-based shell theories for free vibrations of anisotropic shells using an advanced Ritz formulation and accurate curvature descriptions	91-110
Xiong, Jian / Ma, Li / Stocchi, Ariel / Yang, Jinshui / Wu, Linzhi / Pan, Shidong	Bending response of carbon fiber composite sandwich beams with three dimensional honeycomb cores	234-242
Lopatin, A. V. / Morozov, E. V.	Buckling of a uniformly compressed composite rectangular CCCC sandwich plate	332-340
Haque, Mohammad H. / Upadhyaya, Priyank / Roy, Samit / Ware, Taylor / Voit, Walter / Lu, Hongbing	The changes in flexural properties and microstructures of carbon fiber bismaleimide composite after exposure to a high temperature	57-64
Li, Jun / Wu, Zhen / Kong, Xiangshao / Li, Xiaobin / Wu, Weiguo	Comparison of various shear deformation theories for free vibration of laminated composite beams with general lay-ups	767-778
Aggelopoulos, E. S. / Righiniotis, T. D. / Chryssanthopoulos, M. K.	Composite patch repair of steel plates with fatigue cracks growing in the thickness direction	729-735
Rettenwander, Thomas / Fischlschweiger, Michael / Steinbichler, Georg	Computational structural tailoring of continuous fibre reinforced polymer matrix composites by hybridisation of principal stress and thickness optimisation	711-719
Joannès, S. / Mazé, L. / Bunsell, A. R.	A concentration-dependent diffusion coefficient model for water sorption in composite	111-118
Lim, Jun Woo / Kim, Minkook / Lee, Dai Gil	Conductive particles embedded carbon composite bipolar plates for proton exchange membrane fuel cells	757-766
Kathiresan, M. / Manisekar, K. / Manikandan, V.	Crashworthiness analysis of glass fibre/epoxy laminated thin walled composite conical frusta under axial compression	584-599
Bottoni, Marina / Mazzotti, Claudio / Savoia, Marco	Creep tests on GFRP pultruded specimens subjected to traction or shear	514-523
Caporale, A. / Feo, L. / Hui, D. / Luciano, R.	Debonding of FRP in multi-span masonry arch structures via limit analysis	856-865
Eijo, A. / Oñate, E. / Oller, S.	Delamination in laminated plates using the 4-noded quadrilateral QLRZ plate element based on the refined zigzag theory	456-471
Li, Xin / Zhang, Peiwen / Wang, Zhihua / Wu, Guiying / Zhao, Longmao	Dynamic behavior of aluminum honeycomb sandwich panels under air blast: Experiment and numerical analysis	1001-1008
Thinh, Tran Ich / Nguyen, Manh Cuong / Ninh, Dinh Gia	Dynamic stiffness formulation for vibration analysis of thick composite plates resting on non-homogenous foundations	684-695
Mortas, N. / Er, O. / Reis, P. N. B. / Ferreira, J. A. M.	Effect of corrosive solutions on composites laminates subjected to low velocity impact loading	205-211
Lee, M. G. / Hoang, V. M. / Yoon, J. W. / Han, S. M. / Suh, Y. S. / Kang, K. J.	Effects of cell size and orientation on compressive strength of WBK	635-645
Nilakantan, Gaurav / Nutt, Steven	Effects of clamping design on the ballistic impact response of soft body armor	137-150
González, E. V. / Maimí, P. / Sainz de Aja, J. R. / Cruz, P. / Camanho, P. P.	Effects of interply hybridization on the damage resistance and tolerance of composite laminates	319-331
Akavci, S. S.	An efficient shear deformation theory for free vibration of functionally graded thick rectangular plates on elastic foundation	667-676
Zhang, Guoqi / Wang, Bing / Ma, Li / Wu, Linzhi / Pan, Shidong / Yang, Jinshui	Energy absorption and low velocity impact response of polyurethane foam filled pyramidal lattice core sandwich panels	304-310
Shariyat, M. / Moradi, M.	Enhanced algorithm for nonlinear impact of rectangular composite plates with SMA wires, accurately tracing the instantaneous and local phase changes	834-847
Cernescu, A. / Romanoff, J. / Remes, H. / Faur, N. / Jelovica, J.	Equivalent mechanical properties for cylindrical cell honeycomb core structure	866-875
Bartolozzi, Giorgio / Baldanzini, Niccolò / Pierini, Marco	Equivalent properties for corrugated cores of sandwich structures: A general analytical method	736-746
Loredo, A.	Exact 3D solution for static and damped harmonic response of simply supported general laminates	625-634
Ghannadpour, S. A. M. / Ovesy, H. R. / Zia-Dehkordi, E.	An exact finite strip for the calculation of initial post-buckling stiffness of shear-deformable composite laminated plates	504-513
Asadi, H. / Kiani, Y. / Shakeri, M. / Eslami, M. R.	Exact solution for nonlinear thermal stability of hybrid laminated composite Timoshenko beams reinforced with SMA fibers	811-822
Jiang, X. / Kolstein, M. H. / Bijlaard, F. S. K.	Experimental and numerical study on mechanical behavior of an adhesively-bonded joint of FRP–steel composite bridge under shear loading	387-399
Bisagni, Chiara / Dávila, Carlos G.	Experimental investigation of the postbuckling response and collapse of a single-stringer specimen	493-503
D'Ambrisi, Angelo / Focacci, Francesco / Luciano, Raimondo	Experimental investigation on flexural behavior of timber beams repaired with CFRP plates	720-728
Rahai, Alireza / Akbarpour, Hamed	Experimental investigation on rectangular RC columns strengthened with CFRP composites under axial load and biaxial bending	538-546
Son, Han-Gi / Park, Yong-Bin / Kweon, Jin-Hwe / Choi, Jin-Ho	Fatigue behaviour of metal pin-reinforced composite single-lap joints in a hygrothermal environment	151-160
Ji, Hun / Kweon, Jin-Hwe / Choi, Jin-Ho	Fatigue characteristics of stainless steel pin-reinforced composite hat joints	49-56
Kang, Min-Hyo / Choi, Jin-Ho / Kweon, Jin-Hwe	Fatigue life evaluation and crack detection of the adhesive joint with carbon nanotubes	417-422
Jothi, S. / Croft, T. N. / Brown, S. G. R. / de Souza Neto, E. A.	Finite element microstructural homogenization techniques and intergranular, intragranular microstructural effects on effective diffusion coefficient of heterogeneous polycrystalline composite media	555-564
Feng, D. / Aymerich, F.	Finite element modelling of damage induced by low-velocity impact on composite laminates	161-171
Wang, Jun / Xu, Yingjie / Zhang, Weihong	Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive model	21-30
Zhang, Dongdong / Zhao, Qilin / Huang, Yaxin / Li, Fei / Chen, Haosen / Miao, Dasheng	Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system	600-615
Jin, Guoyong / Xie, Xiang / Liu, Zhigang	The Haar wavelet method for free vibration analysis of functionally graded cylindrical shells based on the shear deformation theory	435-448
Gaiotti, Marco / Rizzo, Cesare M. / Branner, Kim / Berring, Peter	An high order Mixed Interpolation Tensorial Components (MITC) shell element approach for modeling the buckling behavior of delaminated composites	657-666
George, Tochukwu / Deshpande, Vikram S. / Sharp, Keith / Wadley, Haydn N. G.	Hybrid core carbon fiber composite sandwich panels: Fabrication and mechanical response	696-710
Santos, H. A. F. A. / Silberschmidt, V. V.	Hybrid equilibrium finite element formulation for composite beams with partial interaction	646-656
Natarajan, Sundararajan / Deogekar, Pratik S. / Manickam, Ganapathi / Belouettar, Salim	Hygrothermal effects on the free vibration and buckling of laminated composites with cutouts	848-855
Pérez, Marco A. / Gil, Lluís / Oller, Sergio	Impact damage identification in composite laminates using vibration testing	267-276
Sarlin, E. / Apostol, M. / Lindroos, M. / Kuokkala, V.-T. / Vuorinen, J. / Lepistö, T. / Vippola, M.	Impact properties of novel corrosion resistant hybrid structures	886-893
Simões, Sónia / Viana, Filomena / Reis, Marcos A. L. / Vieira, Manuel F.	Improved dispersion of carbon nanotubes in aluminum nanocomposites	992-1000
Liu, Kuang C. / Ghoshal, Anindya	Inherent symmetry and microstructure ambiguity in micromechanics	311-318
Sadeghi, G. / Hosseini-Toudeshky, H. / Mohammadi, B.	An investigation of matrix cracking damage evolution in composite laminates – Development of an advanced numerical tool	937-950
Saavedra Flores, E. I. / DiazDelaO, F. A. / Friswell, M. I. / Ajaj, R. M.	Investigation on the extensibility of the wood cell-wall composite by an approach based on homogenisation and uncertainty analysis	212-222
Marjanović, Miroslav / Vuksanović, Djordje	Layerwise solution of free vibrations and buckling of laminated composite and sandwich plates with embedded delaminations	9-20
Agnese, Fabio / Scarpa, Fabrizio	Macro-composites with star-shaped inclusions for vibration damping in wind turbine blades	978-986
Ivančević, D. / Smojver, I.	Micromechanical damage modelling using a two-scale method for laminated composite structures	223-233
Egan, B. / McCarthy, M. A. / Frizzell, R. M. / Gray, P. J. / McCarthy, C. T.	Modelling bearing failure in countersunk composite joints under quasi-static loading using 3D explicit finite element analysis	963-977
Dariushi, Soheil / Sadighi, Mojtaba	A new nonlinear high order theory for sandwich beams: An analytical and experimental investigation	779-788
Moreno-García, P. / Araújo dos Santos, J. V. / Lopes, H.	A new technique to optimize the use of mode shape derivatives to localize damage in laminated composite plates	548-554
Burlayenko, V. N. / Sadowski, T.	Nonlinear dynamic analysis of harmonically excited debonded sandwich plates using finite element modelling	354-366
Zhang, W. / Chen, J. E. / Cao, D. X. / Chen, L. H.	Nonlinear dynamic responses of a truss core sandwich plate	367-386
Khan, A. H. / Patel, B. P.	Nonlinear forced vibration response of bimodular laminated composite plates	524-537
Wang, Zhen-Xin / Xu, Jifeng / Qiao, Pizhong	Nonlinear low-velocity impact analysis of temperature-dependent nanotube-reinforced composite plates	423-434
Alijani, Farbod / Amabili, Marco	Nonlinear vibrations and multiple resonances of fluid filled arbitrary laminated circular cylindrical shells	951-962
Zhang, Jianyu / Liu, Fengrui / Zhao, Libin / Fei, Binjun	A novel characteristic curve for failure prediction of multi-bolt composite joints	129-136
Wu, Wangqing / Abliz, Dilmurat / Jiang, Bingyan / Ziegmann, Gerhard / Meiners, Dieter	A novel process for cost effective manufacturing of fiber metal laminate with textile reinforced pCBT composites and aluminum alloy	172-180
Xiang, Yibing / Liu, Runze / Peng, Tishun / Liu, Yongming	A novel subcycle composite delamination growth model under fatigue cyclic loadings	31-40
Arbelo, Mariano A. / Degenhardt, Richard / Castro, Saullo G. P. / Zimmermann, Rolf	Numerical characterization of imperfection sensitive composite structures	295-303
Green, S. D. / Long, A. C. / El Said, B. S. F. / Hallett, S. R.	Numerical modelling of 3D woven preform deformations	747-756
Feito, N. / López-Puente, J. / Santiuste, C. / Miguélez, M. H.	Numerical prediction of delamination in CFRP drilling	677-683
Li, Zhi-Min / Qiao, Pizhong	On an exact bending curvature model for nonlinear free vibration analysis shear deformable anisotropic laminated beams	243-258
Lin, J. / Naceur, H. / Laksimi, A. / Coutellier, D.	On the implementation of a nonlinear shell-based SPH method for thin multilayered structures	905-914
Dung, Dao Van / Hoa, Le Kha / Nga, Nguyen Thi	On the stability of functionally graded truncated conical shells reinforced by functionally graded stiffeners and surrounded by an elastic medium	77-90
Jiang, C. H. / Chang, Y. H. / Kam, T. Y.	Optimal design of rectangular composite flat-panel sound radiators considering excitation location	65-76
Bang, Chang Seon / Park, ChoongHeum / Lee, Dai Gil	Optimum glass fiber volume fraction in the adhesive for the Al-SUS adhesively bonded joints at cryogenic temperatures	119-128
Yazdani, Saleh / Ribeiro, Pedro / Dias Rodrigues, José	A p-version layerwise model for large deflection of composite plates with curvilinear fibres	181-190
Ovesy, H. R. / Fazilati, J.	Parametric instability analysis of laminated composite curved shells subjected to non-uniform in-plane load	449-455
Hu, Yi-le / Yu, Yin / Wang, Hai	Peridynamic analytical method for progressive damage in notched composite laminates	801-810
Nedjar, B.	Plasticity-based modelling of fibre/matrix debonding in unidirectional composites	41-48
Jiang, Li-li / Xu, Guo-dong / Cheng, Su / Lu, Xia-mei / Zeng, Tao	Predicting the thermal conductivity and temperature distribution in 3D braided composites	578-583
Zhang, Jianyu / Liu, Fengrui / Zhao, Libin / Chen, Yuli / Fei, Binjun	A progressive damage analysis based characteristic length method for multi-bolt composite joints	915-923
Zainuddin, S. / Arefin, T. / Fahim, A. / Hosur, M. V. / Tyson, J. D. / Kumar, Ashok / Trovillion, J. / Jeelani, S.	Recovery and improvement in low-velocity impact properties of e-glass/epoxy composites through novel self-healing technique	277-286
Weber, Markus J. / Middendorf, Peter	Semi-analytical skin buckling of curved orthotropic grid-stiffened shells	616-624
Li, Anqing / Zhou, Shenjie / Zhou, Shasha / Wang, Binglei	A size-dependent bilayered microbeam model based on strain gradient elasticity theory	259-266
Wang, Yonghua / Zhang, Chengchun / Ren, Luquan / Ichchou, Mohamed / Galland, Marie-Annick / Bareille, Olivier	Sound absorption of a new bionic multi-layer absorber	400-408
Talha, Mohammad / Singh, B. N.	Stochastic perturbation-based finite element for buckling statistics of FGM plates with uncertain material properties in thermal environments	823-833
Joliff, Y. / Rekik, W. / Belec, L. / Chailan, J. F.	Study of the moisture/stress effects on glass fibre/epoxy composite and the impact of the interphase area	876-885
Yun, Jong-Hwa / Choi, Jin-Ho / Kweon, Jin-Hwe	A study on the strength improvement of the multi-bolted joint	409-416
Yu, Guo-Liang / Zhang, Huai-Wu / Li, Yuan-Xun / Li, Jie	Theoretical study of nonlinear magnetoelectric response in laminated magnetoelectric composites	287-294
Zhang, L. W. / Zhu, P. / Liew, K. M.	Thermal buckling of functionally graded plates using a local Kriging meshless method	472-492
Li, Zhi-Min	Thermal postbuckling behavior of 3D braided beams with initial geometric imperfection under different type temperature distributions	924-936
Jin, Guoyong / Su, Zhu / Shi, Shuangxia / Ye, Tiangui / Gao, Siyang	Three-dimensional exact solution for the free vibration of arbitrarily thick functionally graded rectangular plates with general boundary conditions	565-577
Osgooei, Peyman M. / Tait, Michael J. / Konstantinidis, Dimitrios	Three-dimensional finite element analysis of circular fiber-reinforced elastomeric bearings under compression	191-204
Malekzadeh, P. / Ghaedsharaf, M.	Three-dimensional free vibration of laminated cylindrical panels with functionally graded layers	894-904
Kim, Minkook / Lim, Jun Woo / Kim, Ki Hyun / Lee, Dai Gil	Ultra high speed curing bipolar plates made of carbon fabric/phenolic composite using acid catalyst for proton exchange membrane fuel cell	1-8
Samaratunga, Dulip / Jha, Ratneshwar / Gopalakrishnan, S.	Wavelet spectral finite element for wave propagation in shear deformable laminated composite plates	341-353
Wu, Chao / Bai, Yu	Web crippling behaviour of pultruded glass fibre reinforced polymer sections	789-800

Informations
sur cette fiche
IssueID
37880
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - février 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - février 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.