Composite Structures - February 2014

Published:	February 2014

Articles in this Issue

Author(s)	Title	Page(s)
Kamiński, Marcin / Kazimierczak, Marlena	2D versus 3D probabilistic homogenization of the metallic fiber-reinforced composites by the perturbation-based stochastic Finite Element Method	1009-1018
Carra, Guglielmo / Carvelli, Valter	Ageing of pultruded glass fibre reinforced polymer composites exposed to combined environmental agents	1019-1026
Liu, Ke / Yang, Zhimao / Takagi, Hitoshi	Anisotropic thermal conductivity of unidirectional natural abaca fiber composites as a function of lumen and cell wall structure	987-991
Fazzolari, F. A. / Banerjee, J. R.	Axiomatic/asymptotic PVD/RMVT-based shell theories for free vibrations of anisotropic shells using an advanced Ritz formulation and accurate curvature descriptions	91-110
Xiong, Jian / Ma, Li / Stocchi, Ariel / Yang, Jinshui / Wu, Linzhi / Pan, Shidong	Bending response of carbon fiber composite sandwich beams with three dimensional honeycomb cores	234-242
Lopatin, A. V. / Morozov, E. V.	Buckling of a uniformly compressed composite rectangular CCCC sandwich plate	332-340
Haque, Mohammad H. / Upadhyaya, Priyank / Roy, Samit / Ware, Taylor / Voit, Walter / Lu, Hongbing	The changes in flexural properties and microstructures of carbon fiber bismaleimide composite after exposure to a high temperature	57-64
Li, Jun / Wu, Zhen / Kong, Xiangshao / Li, Xiaobin / Wu, Weiguo	Comparison of various shear deformation theories for free vibration of laminated composite beams with general lay-ups	767-778
Aggelopoulos, E. S. / Righiniotis, T. D. / Chryssanthopoulos, M. K.	Composite patch repair of steel plates with fatigue cracks growing in the thickness direction	729-735
Rettenwander, Thomas / Fischlschweiger, Michael / Steinbichler, Georg	Computational structural tailoring of continuous fibre reinforced polymer matrix composites by hybridisation of principal stress and thickness optimisation	711-719
Joannès, S. / Mazé, L. / Bunsell, A. R.	A concentration-dependent diffusion coefficient model for water sorption in composite	111-118
Lim, Jun Woo / Kim, Minkook / Lee, Dai Gil	Conductive particles embedded carbon composite bipolar plates for proton exchange membrane fuel cells	757-766
Kathiresan, M. / Manisekar, K. / Manikandan, V.	Crashworthiness analysis of glass fibre/epoxy laminated thin walled composite conical frusta under axial compression	584-599
Bottoni, Marina / Mazzotti, Claudio / Savoia, Marco	Creep tests on GFRP pultruded specimens subjected to traction or shear	514-523
Caporale, A. / Feo, L. / Hui, D. / Luciano, R.	Debonding of FRP in multi-span masonry arch structures via limit analysis	856-865
Eijo, A. / Oñate, E. / Oller, S.	Delamination in laminated plates using the 4-noded quadrilateral QLRZ plate element based on the refined zigzag theory	456-471
Li, Xin / Zhang, Peiwen / Wang, Zhihua / Wu, Guiying / Zhao, Longmao	Dynamic behavior of aluminum honeycomb sandwich panels under air blast: Experiment and numerical analysis	1001-1008
Thinh, Tran Ich / Nguyen, Manh Cuong / Ninh, Dinh Gia	Dynamic stiffness formulation for vibration analysis of thick composite plates resting on non-homogenous foundations	684-695
Mortas, N. / Er, O. / Reis, P. N. B. / Ferreira, J. A. M.	Effect of corrosive solutions on composites laminates subjected to low velocity impact loading	205-211
Lee, M. G. / Hoang, V. M. / Yoon, J. W. / Han, S. M. / Suh, Y. S. / Kang, K. J.	Effects of cell size and orientation on compressive strength of WBK	635-645
Nilakantan, Gaurav / Nutt, Steven	Effects of clamping design on the ballistic impact response of soft body armor	137-150
González, E. V. / Maimí, P. / Sainz de Aja, J. R. / Cruz, P. / Camanho, P. P.	Effects of interply hybridization on the damage resistance and tolerance of composite laminates	319-331
Akavci, S. S.	An efficient shear deformation theory for free vibration of functionally graded thick rectangular plates on elastic foundation	667-676
Zhang, Guoqi / Wang, Bing / Ma, Li / Wu, Linzhi / Pan, Shidong / Yang, Jinshui	Energy absorption and low velocity impact response of polyurethane foam filled pyramidal lattice core sandwich panels	304-310
Shariyat, M. / Moradi, M.	Enhanced algorithm for nonlinear impact of rectangular composite plates with SMA wires, accurately tracing the instantaneous and local phase changes	834-847
Cernescu, A. / Romanoff, J. / Remes, H. / Faur, N. / Jelovica, J.	Equivalent mechanical properties for cylindrical cell honeycomb core structure	866-875
Bartolozzi, Giorgio / Baldanzini, Niccolò / Pierini, Marco	Equivalent properties for corrugated cores of sandwich structures: A general analytical method	736-746
Loredo, A.	Exact 3D solution for static and damped harmonic response of simply supported general laminates	625-634
Ghannadpour, S. A. M. / Ovesy, H. R. / Zia-Dehkordi, E.	An exact finite strip for the calculation of initial post-buckling stiffness of shear-deformable composite laminated plates	504-513
Asadi, H. / Kiani, Y. / Shakeri, M. / Eslami, M. R.	Exact solution for nonlinear thermal stability of hybrid laminated composite Timoshenko beams reinforced with SMA fibers	811-822
Jiang, X. / Kolstein, M. H. / Bijlaard, F. S. K.	Experimental and numerical study on mechanical behavior of an adhesively-bonded joint of FRP–steel composite bridge under shear loading	387-399
Bisagni, Chiara / Dávila, Carlos G.	Experimental investigation of the postbuckling response and collapse of a single-stringer specimen	493-503
D'Ambrisi, Angelo / Focacci, Francesco / Luciano, Raimondo	Experimental investigation on flexural behavior of timber beams repaired with CFRP plates	720-728
Rahai, Alireza / Akbarpour, Hamed	Experimental investigation on rectangular RC columns strengthened with CFRP composites under axial load and biaxial bending	538-546
Son, Han-Gi / Park, Yong-Bin / Kweon, Jin-Hwe / Choi, Jin-Ho	Fatigue behaviour of metal pin-reinforced composite single-lap joints in a hygrothermal environment	151-160
Ji, Hun / Kweon, Jin-Hwe / Choi, Jin-Ho	Fatigue characteristics of stainless steel pin-reinforced composite hat joints	49-56
Kang, Min-Hyo / Choi, Jin-Ho / Kweon, Jin-Hwe	Fatigue life evaluation and crack detection of the adhesive joint with carbon nanotubes	417-422
Jothi, S. / Croft, T. N. / Brown, S. G. R. / de Souza Neto, E. A.	Finite element microstructural homogenization techniques and intergranular, intragranular microstructural effects on effective diffusion coefficient of heterogeneous polycrystalline composite media	555-564
Feng, D. / Aymerich, F.	Finite element modelling of damage induced by low-velocity impact on composite laminates	161-171
Wang, Jun / Xu, Yingjie / Zhang, Weihong	Finite element simulation of PMMA aircraft windshield against bird strike by using a rate and temperature dependent nonlinear viscoelastic constitutive model	21-30
Zhang, Dongdong / Zhao, Qilin / Huang, Yaxin / Li, Fei / Chen, Haosen / Miao, Dasheng	Flexural properties of a lightweight hybrid FRP-aluminum modular space truss bridge system	600-615
Jin, Guoyong / Xie, Xiang / Liu, Zhigang	The Haar wavelet method for free vibration analysis of functionally graded cylindrical shells based on the shear deformation theory	435-448
Gaiotti, Marco / Rizzo, Cesare M. / Branner, Kim / Berring, Peter	An high order Mixed Interpolation Tensorial Components (MITC) shell element approach for modeling the buckling behavior of delaminated composites	657-666
George, Tochukwu / Deshpande, Vikram S. / Sharp, Keith / Wadley, Haydn N. G.	Hybrid core carbon fiber composite sandwich panels: Fabrication and mechanical response	696-710
Santos, H. A. F. A. / Silberschmidt, V. V.	Hybrid equilibrium finite element formulation for composite beams with partial interaction	646-656
Natarajan, Sundararajan / Deogekar, Pratik S. / Manickam, Ganapathi / Belouettar, Salim	Hygrothermal effects on the free vibration and buckling of laminated composites with cutouts	848-855
Pérez, Marco A. / Gil, Lluís / Oller, Sergio	Impact damage identification in composite laminates using vibration testing	267-276
Sarlin, E. / Apostol, M. / Lindroos, M. / Kuokkala, V.-T. / Vuorinen, J. / Lepistö, T. / Vippola, M.	Impact properties of novel corrosion resistant hybrid structures	886-893
Simões, Sónia / Viana, Filomena / Reis, Marcos A. L. / Vieira, Manuel F.	Improved dispersion of carbon nanotubes in aluminum nanocomposites	992-1000
Liu, Kuang C. / Ghoshal, Anindya	Inherent symmetry and microstructure ambiguity in micromechanics	311-318
Sadeghi, G. / Hosseini-Toudeshky, H. / Mohammadi, B.	An investigation of matrix cracking damage evolution in composite laminates – Development of an advanced numerical tool	937-950
Saavedra Flores, E. I. / DiazDelaO, F. A. / Friswell, M. I. / Ajaj, R. M.	Investigation on the extensibility of the wood cell-wall composite by an approach based on homogenisation and uncertainty analysis	212-222
Marjanović, Miroslav / Vuksanović, Djordje	Layerwise solution of free vibrations and buckling of laminated composite and sandwich plates with embedded delaminations	9-20
Agnese, Fabio / Scarpa, Fabrizio	Macro-composites with star-shaped inclusions for vibration damping in wind turbine blades	978-986
Ivančević, D. / Smojver, I.	Micromechanical damage modelling using a two-scale method for laminated composite structures	223-233
Egan, B. / McCarthy, M. A. / Frizzell, R. M. / Gray, P. J. / McCarthy, C. T.	Modelling bearing failure in countersunk composite joints under quasi-static loading using 3D explicit finite element analysis	963-977
Dariushi, Soheil / Sadighi, Mojtaba	A new nonlinear high order theory for sandwich beams: An analytical and experimental investigation	779-788
Moreno-García, P. / Araújo dos Santos, J. V. / Lopes, H.	A new technique to optimize the use of mode shape derivatives to localize damage in laminated composite plates	548-554
Burlayenko, V. N. / Sadowski, T.	Nonlinear dynamic analysis of harmonically excited debonded sandwich plates using finite element modelling	354-366
Zhang, W. / Chen, J. E. / Cao, D. X. / Chen, L. H.	Nonlinear dynamic responses of a truss core sandwich plate	367-386
Khan, A. H. / Patel, B. P.	Nonlinear forced vibration response of bimodular laminated composite plates	524-537
Wang, Zhen-Xin / Xu, Jifeng / Qiao, Pizhong	Nonlinear low-velocity impact analysis of temperature-dependent nanotube-reinforced composite plates	423-434
Alijani, Farbod / Amabili, Marco	Nonlinear vibrations and multiple resonances of fluid filled arbitrary laminated circular cylindrical shells	951-962
Zhang, Jianyu / Liu, Fengrui / Zhao, Libin / Fei, Binjun	A novel characteristic curve for failure prediction of multi-bolt composite joints	129-136
Wu, Wangqing / Abliz, Dilmurat / Jiang, Bingyan / Ziegmann, Gerhard / Meiners, Dieter	A novel process for cost effective manufacturing of fiber metal laminate with textile reinforced pCBT composites and aluminum alloy	172-180
Xiang, Yibing / Liu, Runze / Peng, Tishun / Liu, Yongming	A novel subcycle composite delamination growth model under fatigue cyclic loadings	31-40
Arbelo, Mariano A. / Degenhardt, Richard / Castro, Saullo G. P. / Zimmermann, Rolf	Numerical characterization of imperfection sensitive composite structures	295-303
Green, S. D. / Long, A. C. / El Said, B. S. F. / Hallett, S. R.	Numerical modelling of 3D woven preform deformations	747-756
Feito, N. / López-Puente, J. / Santiuste, C. / Miguélez, M. H.	Numerical prediction of delamination in CFRP drilling	677-683
Li, Zhi-Min / Qiao, Pizhong	On an exact bending curvature model for nonlinear free vibration analysis shear deformable anisotropic laminated beams	243-258
Lin, J. / Naceur, H. / Laksimi, A. / Coutellier, D.	On the implementation of a nonlinear shell-based SPH method for thin multilayered structures	905-914
Dung, Dao Van / Hoa, Le Kha / Nga, Nguyen Thi	On the stability of functionally graded truncated conical shells reinforced by functionally graded stiffeners and surrounded by an elastic medium	77-90
Jiang, C. H. / Chang, Y. H. / Kam, T. Y.	Optimal design of rectangular composite flat-panel sound radiators considering excitation location	65-76
Bang, Chang Seon / Park, ChoongHeum / Lee, Dai Gil	Optimum glass fiber volume fraction in the adhesive for the Al-SUS adhesively bonded joints at cryogenic temperatures	119-128
Yazdani, Saleh / Ribeiro, Pedro / Dias Rodrigues, José	A p-version layerwise model for large deflection of composite plates with curvilinear fibres	181-190
Ovesy, H. R. / Fazilati, J.	Parametric instability analysis of laminated composite curved shells subjected to non-uniform in-plane load	449-455
Hu, Yi-le / Yu, Yin / Wang, Hai	Peridynamic analytical method for progressive damage in notched composite laminates	801-810
Nedjar, B.	Plasticity-based modelling of fibre/matrix debonding in unidirectional composites	41-48
Jiang, Li-li / Xu, Guo-dong / Cheng, Su / Lu, Xia-mei / Zeng, Tao	Predicting the thermal conductivity and temperature distribution in 3D braided composites	578-583
Zhang, Jianyu / Liu, Fengrui / Zhao, Libin / Chen, Yuli / Fei, Binjun	A progressive damage analysis based characteristic length method for multi-bolt composite joints	915-923
Zainuddin, S. / Arefin, T. / Fahim, A. / Hosur, M. V. / Tyson, J. D. / Kumar, Ashok / Trovillion, J. / Jeelani, S.	Recovery and improvement in low-velocity impact properties of e-glass/epoxy composites through novel self-healing technique	277-286
Weber, Markus J. / Middendorf, Peter	Semi-analytical skin buckling of curved orthotropic grid-stiffened shells	616-624
Li, Anqing / Zhou, Shenjie / Zhou, Shasha / Wang, Binglei	A size-dependent bilayered microbeam model based on strain gradient elasticity theory	259-266
Wang, Yonghua / Zhang, Chengchun / Ren, Luquan / Ichchou, Mohamed / Galland, Marie-Annick / Bareille, Olivier	Sound absorption of a new bionic multi-layer absorber	400-408
Talha, Mohammad / Singh, B. N.	Stochastic perturbation-based finite element for buckling statistics of FGM plates with uncertain material properties in thermal environments	823-833
Joliff, Y. / Rekik, W. / Belec, L. / Chailan, J. F.	Study of the moisture/stress effects on glass fibre/epoxy composite and the impact of the interphase area	876-885
Yun, Jong-Hwa / Choi, Jin-Ho / Kweon, Jin-Hwe	A study on the strength improvement of the multi-bolted joint	409-416
Yu, Guo-Liang / Zhang, Huai-Wu / Li, Yuan-Xun / Li, Jie	Theoretical study of nonlinear magnetoelectric response in laminated magnetoelectric composites	287-294
Zhang, L. W. / Zhu, P. / Liew, K. M.	Thermal buckling of functionally graded plates using a local Kriging meshless method	472-492
Li, Zhi-Min	Thermal postbuckling behavior of 3D braided beams with initial geometric imperfection under different type temperature distributions	924-936
Jin, Guoyong / Su, Zhu / Shi, Shuangxia / Ye, Tiangui / Gao, Siyang	Three-dimensional exact solution for the free vibration of arbitrarily thick functionally graded rectangular plates with general boundary conditions	565-577
Osgooei, Peyman M. / Tait, Michael J. / Konstantinidis, Dimitrios	Three-dimensional finite element analysis of circular fiber-reinforced elastomeric bearings under compression	191-204
Malekzadeh, P. / Ghaedsharaf, M.	Three-dimensional free vibration of laminated cylindrical panels with functionally graded layers	894-904
Kim, Minkook / Lim, Jun Woo / Kim, Ki Hyun / Lee, Dai Gil	Ultra high speed curing bipolar plates made of carbon fabric/phenolic composite using acid catalyst for proton exchange membrane fuel cell	1-8
Samaratunga, Dulip / Jha, Ratneshwar / Gopalakrishnan, S.	Wavelet spectral finite element for wave propagation in shear deformable laminated composite plates	341-353
Wu, Chao / Bai, Yu	Web crippling behaviour of pultruded glass fibre reinforced polymer sections	789-800

About this
data sheet
IssueID
37880
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - February 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - February 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.