Composite Structures - août 2017

Publié:	août 2017

Auteur(s)	Titre	Page(s)
Mohammadzadeh, Behzad / Noh, Hyuk Chun	Analytical method to investigate nonlinear dynamic responses of sandwich plates with FGM faces resting on elastic foundation considering blast loads	142-157
Karamanli, Armagan	Bending behaviour of two directional functionally graded sandwich beams by using a quasi-3d shear deformation theory	70-86
Karrech, A. / Elchalakani, M. / Attar, M. / Seibi, A. C.	Buckling and post-buckling analysis of geometrically non-linear composite plates exhibiting large initial imperfections	134-141
Boscato, Giosuè	Comparative study on dynamic parameters and seismic demand of pultruded FRP members and structures	399-419
Ivañez, Ines / Fernandez-Cañadas, Lorena M. / Sanchez-Saez, Sonia	Compressive deformation and energy-absorption capability of aluminium honeycomb core	123-133
Saidane, El Hadi / Scida, Daniel / Assarar, Mustapha / Ayad, Rezak	Damage mechanisms assessment of hybrid flax-glass fibre composites using acoustic emission	1-11
Han, Min-Gu / Cho, Yong Hyeon / Jeon, Seung-Woo / Chang, Seung-Hwan	Design and fabrication of a metal-composite hybrid pantograph upper arm by co-cure technique with a friction layer	166-175
Awrejcewicz, J. / Pavlov, S. P. / Bodyagina, K. S. / Zhigalov, M. V. / Krysko, V. A.	Design of composite structures with extremal elastic properties in the presence of technological constraints	19-25
Yoo, Doo-Yeol / Kim, Soonho / Park, Gi-Joon / Park, Jung-Jun / Kim, Sung-Wook	Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites	375-388
Sladek, Jan / Sladek, Vladimir / Repka, Miroslav / Kasala, Jozef / Bishay, Peter	Evaluation of effective material properties in magneto-electro-elastic composite materials	176-186
Nzabonimpa, J. D. / Hong, Won-Kee	Evaluation of hybrid joints strengthened by carbon plates connecting new steel frames with existing concrete slabs	348-365
Reuter, Corin / Sauerland, Kim-Henning / Tröster, Thomas	Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading	33-44
Wang, Yi / Wang, Fusheng / Jia, Senqing / Yue, Zhufeng	Experimental and numerical studies on the stability behavior of composite panels stiffened by tilting hat-stringers	187-195
Acierno, S. / Barretta, R. / Luciano, R. / de Sciarra, F. Marotti / Russo, P.	Experimental evaluations and modeling of the tensile behavior of polypropylene/single-walled carbon nanotubes fibers	12-18
Dlugosch, M. / Fritsch, J. / Lukaszewicz, D. / Hiermaier, S.	Experimental investigation and evaluation of numerical modeling approaches for hybrid-FRP-steel sections under impact loading for the application in automotive crash-structures	338-347
Jen, Ming-Hwa R. / Chang, Che-Kai / Tseng, Yu-Chung	Fatigue response of hybrid magnesium/APC-2 nanocomposite laminates at elevated temperature	211-220
Pandey, Akash / Arockiarajan, A.	Fatigue study on the sensor performance of macro fiber composite (MFC): Theoretical and experimental approach	301-318
Yoo, Doo-Yeol / Park, Jung-Jun / Kim, Sung-Wook	Fiber pullout behavior of HPFRCC: Effects of matrix strength and fiber type	263-276
Liu, Y. P. / Wang, C. G. / Tan, H. F.	Growth from buckling to buckling-driven delamination in a film/substrate system	292-300
Rocha, I. B. C. M. / Raijmaekers, S. / Nijssen, R. P. L. / van der Meer, F. P. / Sluys, L. J.	Hygrothermal ageing behaviour of a glass/epoxy composite used in wind turbine blades	110-122
Amaro, Ana M. / Bernardo, Luís / Pinto, Deesy G. / Lopes, Sergio / Rodrigues, João	The influence of curing agents in the impact properties of epoxy resin nanocomposites	26-32
Yang, Yanfei / Chen, Xiaogang	Investigation of failure modes and influence on ballistic performance of Ultra-High Molecular Weight Polyethylene (UHMWPE) uni-directional laminate for hybrid design	233-243
Maghsoudi, M. / Maghsoudi, A. A.	Moment redistribution and ductility of CFRP strengthened and non-strengthened unbonded post-tensioned indeterminate I-beams composed of UHSSCC	196-210
Karami Pabandi, Hossein / Movahedi, Mojtaba / Kokabi, Amir Hossein	A new refill friction spot welding process for aluminum/polymer composite hybrid structures	59-69
Gholami, Raheb / Ansari, Reza / Gholami, Yousef	Nonlinear resonant dynamics of geometrically imperfect higher-order shear deformable functionally graded carbon-nanotube reinforced composite beams	45-58
Jin, Bo Cheng / Li, Xiaochen / Jain, Atul / Gonzalez, Carlos / Llorca, Javier / Nutt, Steven	Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg	389-398
Xu, Jin-Jun / Chen, Zong-Ping / Xiao, Yan / Demartino, Cristoforo / Wang, Jun-hua	Recycled Aggregate Concrete in FRP-confined columns: A review of experimental results	277-291
Nguyen, Wilson / Trono, William / Panagiotou, Marios / Ostertag, Claudia P.	Seismic response of a rocking bridge column using a precast hybrid fiber-reinforced concrete (HyFRC) tube	252-262
Wang, Qingshan / Qin, Bin / Shi, Dongyan / Liang, Qian	A semi-analytical method for vibration analysis of functionally graded carbon nanotube reinforced composite doubly-curved panels and shells of revolution	87-109
Liu, Bingxin / Jing, Ze / Yong, Huadong / Zhou, Youhe	Strain distributions in superconducting strands with twisted filaments	158-165
Shu, Xiaoping / Wang, Rongliang	Thermal residual solutions of beams, plates and shells due to laminated object manufacturing with gradient cooling	366-374
Lee, Doo Jin / Song, Young Seok	Thermomechanical anisotropy and flowability of talc and glass fiber reinforced multiphase polymer composites	329-337
Saetta, Eduardo / Rega, Giuseppe	Third order thermomechanically coupled laminated plate: 2D nonlinear modeling, minimal reduction, and transient/post-buckled dynamics under different thermal excitations	420-441
Bru, Thomas / Olsson, Robin / Gutkin, Renaud / Vyas, Gaurav M.	Use of the Iosipescu test for the identification of shear damage evolution laws of an orthotropic composite	319-328
Wang, Xiao / Morandini, Marco / Masarati, Pierangelo	Velocity feedback damping of piezo-actuated wings	221-232
Wang, Kaifeng / Okuno, Kiichi / Banu, Mihaela / Epureanu, Bogdan I.	Vibration-based identification of interphase properties in long fiber reinforced composites	244-251

Auteur(s)

Titre

Page(s)

Mohammadzadeh, Behzad / Noh, Hyuk Chun

Analytical method to investigate nonlinear dynamic responses of sandwich plates with FGM faces resting on elastic foundation considering blast loads

142-157

Karamanli, Armagan

Bending behaviour of two directional functionally graded sandwich beams by using a quasi-3d shear deformation theory

70-86

Karrech, A. / Elchalakani, M. / Attar, M. / Seibi, A. C.

Buckling and post-buckling analysis of geometrically non-linear composite plates exhibiting large initial imperfections

134-141

Boscato, Giosuè

Comparative study on dynamic parameters and seismic demand of pultruded FRP members and structures

399-419

Ivañez, Ines / Fernandez-Cañadas, Lorena M. / Sanchez-Saez, Sonia

Compressive deformation and energy-absorption capability of aluminium honeycomb core

123-133

Saidane, El Hadi / Scida, Daniel / Assarar, Mustapha / Ayad, Rezak

Damage mechanisms assessment of hybrid flax-glass fibre composites using acoustic emission

1-11

Han, Min-Gu / Cho, Yong Hyeon / Jeon, Seung-Woo / Chang, Seung-Hwan

Design and fabrication of a metal-composite hybrid pantograph upper arm by co-cure technique with a friction layer

166-175

Awrejcewicz, J. / Pavlov, S. P. / Bodyagina, K. S. / Zhigalov, M. V. / Krysko, V. A.

Design of composite structures with extremal elastic properties in the presence of technological constraints

19-25

Yoo, Doo-Yeol / Kim, Soonho / Park, Gi-Joon / Park, Jung-Jun / Kim, Sung-Wook

Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites

375-388

Sladek, Jan / Sladek, Vladimir / Repka, Miroslav / Kasala, Jozef / Bishay, Peter

Evaluation of effective material properties in magneto-electro-elastic composite materials

176-186

Nzabonimpa, J. D. / Hong, Won-Kee

Evaluation of hybrid joints strengthened by carbon plates connecting new steel frames with existing concrete slabs

348-365

Reuter, Corin / Sauerland, Kim-Henning / Tröster, Thomas

Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading

33-44

Wang, Yi / Wang, Fusheng / Jia, Senqing / Yue, Zhufeng

Experimental and numerical studies on the stability behavior of composite panels stiffened by tilting hat-stringers

187-195

Acierno, S. / Barretta, R. / Luciano, R. / de Sciarra, F. Marotti / Russo, P.

Experimental evaluations and modeling of the tensile behavior of polypropylene/single-walled carbon nanotubes fibers

12-18

Dlugosch, M. / Fritsch, J. / Lukaszewicz, D. / Hiermaier, S.

Experimental investigation and evaluation of numerical modeling approaches for hybrid-FRP-steel sections under impact loading for the application in automotive crash-structures

338-347

Jen, Ming-Hwa R. / Chang, Che-Kai / Tseng, Yu-Chung

Fatigue response of hybrid magnesium/APC-2 nanocomposite laminates at elevated temperature

211-220

Pandey, Akash / Arockiarajan, A.

Fatigue study on the sensor performance of macro fiber composite (MFC): Theoretical and experimental approach

301-318

Yoo, Doo-Yeol / Park, Jung-Jun / Kim, Sung-Wook

Fiber pullout behavior of HPFRCC: Effects of matrix strength and fiber type

263-276

Liu, Y. P. / Wang, C. G. / Tan, H. F.

Growth from buckling to buckling-driven delamination in a film/substrate system

292-300

Rocha, I. B. C. M. / Raijmaekers, S. / Nijssen, R. P. L. / van der Meer, F. P. / Sluys, L. J.

Hygrothermal ageing behaviour of a glass/epoxy composite used in wind turbine blades

110-122

Amaro, Ana M. / Bernardo, Luís / Pinto, Deesy G. / Lopes, Sergio / Rodrigues, João

The influence of curing agents in the impact properties of epoxy resin nanocomposites

26-32

Yang, Yanfei / Chen, Xiaogang

Investigation of failure modes and influence on ballistic performance of Ultra-High Molecular Weight Polyethylene (UHMWPE) uni-directional laminate for hybrid design

233-243

Maghsoudi, M. / Maghsoudi, A. A.

Moment redistribution and ductility of CFRP strengthened and non-strengthened unbonded post-tensioned indeterminate I-beams composed of UHSSCC

196-210

Karami Pabandi, Hossein / Movahedi, Mojtaba / Kokabi, Amir Hossein

A new refill friction spot welding process for aluminum/polymer composite hybrid structures

59-69

Gholami, Raheb / Ansari, Reza / Gholami, Yousef

Nonlinear resonant dynamics of geometrically imperfect higher-order shear deformable functionally graded carbon-nanotube reinforced composite beams

45-58

Jin, Bo Cheng / Li, Xiaochen / Jain, Atul / Gonzalez, Carlos / Llorca, Javier / Nutt, Steven

Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg

389-398

Xu, Jin-Jun / Chen, Zong-Ping / Xiao, Yan / Demartino, Cristoforo / Wang, Jun-hua

Recycled Aggregate Concrete in FRP-confined columns: A review of experimental results

277-291

Nguyen, Wilson / Trono, William / Panagiotou, Marios / Ostertag, Claudia P.

Seismic response of a rocking bridge column using a precast hybrid fiber-reinforced concrete (HyFRC) tube

252-262

Wang, Qingshan / Qin, Bin / Shi, Dongyan / Liang, Qian

A semi-analytical method for vibration analysis of functionally graded carbon nanotube reinforced composite doubly-curved panels and shells of revolution

87-109

Liu, Bingxin / Jing, Ze / Yong, Huadong / Zhou, Youhe

Strain distributions in superconducting strands with twisted filaments

158-165

Shu, Xiaoping / Wang, Rongliang

Thermal residual solutions of beams, plates and shells due to laminated object manufacturing with gradient cooling

366-374

Lee, Doo Jin / Song, Young Seok

Thermomechanical anisotropy and flowability of talc and glass fiber reinforced multiphase polymer composites

329-337

Saetta, Eduardo / Rega, Giuseppe

Third order thermomechanically coupled laminated plate: 2D nonlinear modeling, minimal reduction, and transient/post-buckled dynamics under different thermal excitations

420-441

Bru, Thomas / Olsson, Robin / Gutkin, Renaud / Vyas, Gaurav M.

Use of the Iosipescu test for the identification of shear damage evolution laws of an orthotropic composite

319-328

Wang, Xiao / Morandini, Marco / Masarati, Pierangelo

Velocity feedback damping of piezo-actuated wings

221-232

Wang, Kaifeng / Okuno, Kiichi / Banu, Mihaela / Epureanu, Bogdan I.

Vibration-based identification of interphase properties in long fiber reinforced composites

244-251

Publicité

Composite Structures - août 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - août 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.