Cement and Concrete Research - v. 42, n. 2 (février 2012)

Publié:	février 2012

Auteur(s)	Titre	Page(s)
Lindgård, Jan / Andiç-Çakir, Özge / Fernandes, Isabel / Rønning, Terje F. / Thomas, Michael D. A.	Alkali–silica reactions (ASR): Literature review on parameters influencing laboratory performance testing	223-243
Jansen, D. / Neubauer, J. / Goetz-Neunhoeffer, F. / Haerzschel, R. / Hergeth, W.-D.	Change in reaction kinetics of a Portland cement caused by a superplasticizer — Calculation of heat flow curves from XRD data	327-332
Rashad, A. M. / Bai, Y. / Basheer, P. A. M. / Collier, N. C. / Milestone, N. B.	Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature	333-343
Florea, M. V. A. / Brouwers, H. J. H.	Chloride binding related to hydration products	282-290
Thomas, Jeffrey J. / Allen, Andrew J. / Jennings, Hamlin M.	Density and water content of nanoscale solid C–S–H formed in alkali-activated slag (AAS) paste and implications for chemical shrinkage	377-383
Bangi, Mugume Rodgers / Horiguchi, Takashi	Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures	459-466
Panesar, D. K. / Shindman, B.	The effect of segregation on transport and durability properties of self consolidating concrete	252-264
Brue, Flore / Davy, Catherine A. / Skoczylas, Frédéric / Burlion, Nicolas / Bourbon, Xavier	Effect of temperature on the water retention properties of two high performance concretes	384-396
Pourchet, Sylvie / Liautaud, Solenne / Rinaldi, David / Pochard, Isabelle	Effect of the repartition of the PEG side chains on the adsorption and dispersion behaviors of PCP in presence of sulfate	431-439
Wong, H. S. / Zimmerman, R. W. / Buenfeld, N. R.	Estimating the permeability of cement pastes and mortars using image analysis and effective medium theory	476-483
Oh, Jae Eun / Clark, Simon M. / Wenk, Hans-Rudolf / Monteiro, Paulo J. M.	Experimental determination of bulk modulus of 14Å tobermorite using high pressure synchrotron X-ray diffraction	397-403
Lothenbach, Barbara / Le Saout, Gwenn / Ben Haha, Mohsen / Figi, Renato / Wieland, Erich	Hydration of a low-alkali CEM III/B–SiO2 cement (LAC)	410-423
Erdem, Savaş / Dawson, Andrew Robert / Thom, Nicholas Howard	Impact load-induced micro-structural damage and micro-structure associated mechanical response of concrete made with different surface roughness and porosity aggregates	291-305
Ogawa, S. / Nozaki, T. / Yamada, K. / Hirao, H. / Hooton, R. D.	Improvement on sulfate resistance of blended cement with high alumina slag	244-251
Hamami, A. A. / Turcry, Ph. / Aït-Mokhtar, A.	Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars	490-498
Bentz, Dale P. / Ferraris, Chiara F. / Galler, Michael A. / Hansen, Andrew S. / Guynn, John M.	Influence of particle size distributions on yield stress and viscosity of cement–fly ash pastes	404-409
Erdem, Savaş / Dawson, Andrew Robert / Thom, Nicholas Howard	Influence of the micro- and nanoscale local mechanical properties of the interfacial transition zone on impact behavior of concrete made with different aggregates	447-458
Idiart, Andrés / Bisschop, Jan / Caballero, Antonio / Lura, Pietro	A numerical and experimental study of aggregate-induced shrinkage cracking in cementitious composites	272-281
Thomas, Michael / Bremner, Theodore	Performance of lightweight aggregate concrete containing slag after 25years in a harsh marine environment	358-364
Shafei, Behrouz / Alipour, Azadeh / Shinozuka, Masanobu	Prediction of corrosion initiation in reinforced concrete members subjected to environmental stressors: A finite‐element framework	365-376
Akhavan, Alireza / Shafaatian, Seyed-Mohammad-Hadi / Rajabipour, Farshad	Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars	313-320
Lange, A. / Plank, J.	Study on the foaming behaviour of allyl ether-based polycarboxylate superplasticizers	484-489
Quercia, G. / Hüsken, G. / Brouwers, H. J. H.	Water demand of amorphous nano silica and its impact on the workability of cement paste	344-357

Auteur(s)

Titre

Page(s)

Lindgård, Jan / Andiç-Çakir, Özge / Fernandes, Isabel / Rønning, Terje F. / Thomas, Michael D. A.

Alkali–silica reactions (ASR): Literature review on parameters influencing laboratory performance testing

223-243

Jansen, D. / Neubauer, J. / Goetz-Neunhoeffer, F. / Haerzschel, R. / Hergeth, W.-D.

Change in reaction kinetics of a Portland cement caused by a superplasticizer — Calculation of heat flow curves from XRD data

327-332

Rashad, A. M. / Bai, Y. / Basheer, P. A. M. / Collier, N. C. / Milestone, N. B.

Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature

333-343