Cement and Concrete Research - v. 42, n. 2 (February 2012)

Published:	February 2012

Articles in this Issue

Author(s)	Title	Page(s)
Lindgård, Jan / Andiç-Çakir, Özge / Fernandes, Isabel / Rønning, Terje F. / Thomas, Michael D. A.	Alkali–silica reactions (ASR): Literature review on parameters influencing laboratory performance testing	223-243
Jansen, D. / Neubauer, J. / Goetz-Neunhoeffer, F. / Haerzschel, R. / Hergeth, W.-D.	Change in reaction kinetics of a Portland cement caused by a superplasticizer — Calculation of heat flow curves from XRD data	327-332
Rashad, A. M. / Bai, Y. / Basheer, P. A. M. / Collier, N. C. / Milestone, N. B.	Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature	333-343
Florea, M. V. A. / Brouwers, H. J. H.	Chloride binding related to hydration products	282-290
Thomas, Jeffrey J. / Allen, Andrew J. / Jennings, Hamlin M.	Density and water content of nanoscale solid C–S–H formed in alkali-activated slag (AAS) paste and implications for chemical shrinkage	377-383
Bangi, Mugume Rodgers / Horiguchi, Takashi	Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures	459-466
Panesar, D. K. / Shindman, B.	The effect of segregation on transport and durability properties of self consolidating concrete	252-264
Brue, Flore / Davy, Catherine A. / Skoczylas, Frédéric / Burlion, Nicolas / Bourbon, Xavier	Effect of temperature on the water retention properties of two high performance concretes	384-396
Pourchet, Sylvie / Liautaud, Solenne / Rinaldi, David / Pochard, Isabelle	Effect of the repartition of the PEG side chains on the adsorption and dispersion behaviors of PCP in presence of sulfate	431-439
Wong, H. S. / Zimmerman, R. W. / Buenfeld, N. R.	Estimating the permeability of cement pastes and mortars using image analysis and effective medium theory	476-483
Oh, Jae Eun / Clark, Simon M. / Wenk, Hans-Rudolf / Monteiro, Paulo J. M.	Experimental determination of bulk modulus of 14Å tobermorite using high pressure synchrotron X-ray diffraction	397-403
Lothenbach, Barbara / Le Saout, Gwenn / Ben Haha, Mohsen / Figi, Renato / Wieland, Erich	Hydration of a low-alkali CEM III/B–SiO2 cement (LAC)	410-423
Erdem, Savaş / Dawson, Andrew Robert / Thom, Nicholas Howard	Impact load-induced micro-structural damage and micro-structure associated mechanical response of concrete made with different surface roughness and porosity aggregates	291-305
Ogawa, S. / Nozaki, T. / Yamada, K. / Hirao, H. / Hooton, R. D.	Improvement on sulfate resistance of blended cement with high alumina slag	244-251
Hamami, A. A. / Turcry, Ph. / Aït-Mokhtar, A.	Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars	490-498
Bentz, Dale P. / Ferraris, Chiara F. / Galler, Michael A. / Hansen, Andrew S. / Guynn, John M.	Influence of particle size distributions on yield stress and viscosity of cement–fly ash pastes	404-409
Erdem, Savaş / Dawson, Andrew Robert / Thom, Nicholas Howard	Influence of the micro- and nanoscale local mechanical properties of the interfacial transition zone on impact behavior of concrete made with different aggregates	447-458
Idiart, Andrés / Bisschop, Jan / Caballero, Antonio / Lura, Pietro	A numerical and experimental study of aggregate-induced shrinkage cracking in cementitious composites	272-281
Thomas, Michael / Bremner, Theodore	Performance of lightweight aggregate concrete containing slag after 25years in a harsh marine environment	358-364
Shafei, Behrouz / Alipour, Azadeh / Shinozuka, Masanobu	Prediction of corrosion initiation in reinforced concrete members subjected to environmental stressors: A finite‐element framework	365-376
Akhavan, Alireza / Shafaatian, Seyed-Mohammad-Hadi / Rajabipour, Farshad	Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars	313-320
Lange, A. / Plank, J.	Study on the foaming behaviour of allyl ether-based polycarboxylate superplasticizers	484-489
Quercia, G. / Hüsken, G. / Brouwers, H. J. H.	Water demand of amorphous nano silica and its impact on the workability of cement paste	344-357

About this
data sheet
IssueID
69590
Published on:
20/04/2023
Last updated on:
20/04/2023

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Cement and Concrete Research - v. 42, n. 2 (February 2012)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Cement and Concrete Research - v. 42, n. 2 (February 2012)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.