Experimental Study on PBL Shear Connector Composite Structures
|
|
|||||||||||
Détails bibliographiques
| Auteur(s): |
Qiao Li
Song Xia Canhui Zhao Yuzhi Zhang |
||||
|---|---|---|---|---|---|
| Médium: | papier de conférence | ||||
| Langue(s): | anglais | ||||
| Conférence: | IABSE Symposium: Long Span Bridges and Roofs - Development, Design and Implementation, Kolkata, India, 24-27 September 2013 | ||||
| Publié dans: | IABSE Symposium Kolkata 2013 | ||||
|
|||||
| Page(s): | 1-9 | ||||
| Nombre total de pages (du PDF): | 9 | ||||
| Année: | 2013 | ||||
| DOI: | 10.2749/222137813808627794 | ||||
| Abstrait: |
In the composite structures used in steel-concrete connection, the steel structures are embedded in concrete. The behavior of the shear connectors in such structures is different from that in a composite beam. 38 perfobond leisten (PBL) shear connector specimens and 2 anchorage specimens containing PBL shear connector array are designed in 3 successive experimental tests in the laboratory. The test results manifest that PBL shear connectors show a characteristics of concrete when the slip is relatively small whereas, however, seem to be fairly ductile as the bearing capacity is nearly approached. The diameter of inner bar has a greater effect on the bearing capacity of PBL shear connectors than the outer diameter of embraced concrete column does. The first three ranks in a PBL shear connector array can take about 60% of the external load. The shear connectors closer to the loading point will take greater portion of external loads. |
||||
| Mots-clé: |
Structures composites
|
||||