Yunsheng Zhang 
- (2024): Predicting the impermeability and mechanical properties of manufactured sand polymer waterproof mortar using an optimised back-propagation neural network. Dans: Construction and Building Materials, v. 441 (août 2024).
- (2024): Reactive molecular dynamics simulations of the initial oxidation and passivation of Fe-Cr alloy steel. Dans: Case Studies in Construction Materials, v. 21 (décembre 2024).
- (2024): Quantitative surface quality evaluation for 3D-printed concrete with coarse aggregate through 3D scanning. Dans: Case Studies in Construction Materials, v. 20 (juillet 2024).
- (2024): Study on hydration characteristics and mechanism of recycled powder-cement binary and multivariate systems. Dans: Construction and Building Materials, v. 420 (mars 2024).
- (2024): Prediction of durability of reinforced concrete based on hybrid-Bp neural network. Dans: Construction and Building Materials, v. 425 (avril 2024).
- (2024): Study on test of free and total SO42- in cement-based materials subjected to sulfate attack by conductivity titration. Dans: Construction and Building Materials, v. 424 (avril 2024).
- (2024): Study on sulfate diffusion test and mathematical model of manufactured sand concrete under typical freeze-thaw environment in Northwest China. Dans: Construction and Building Materials, v. 419 (mars 2024).
- (2024): A Review of Waterborne Polymer–Cementitious Composite Repair Materials for Application in Saline Soil Environments: Properties and Progress. Dans: Buildings, v. 14, n. 3 (21 février 2024).
- (2024): Research on Enhancing the Corrosion Resistance of Concrete in a MgSO4 Corrosive Environment Using CTF Synergist. Dans: KSCE Journal of Civil Engineering, v. 28, n. 4 (janvier 2024).
- (2023): Research on carbon emission reduction of manufactured sand concrete based on compressive strength. Dans: Construction and Building Materials, v. 403 (novembre 2023).
- (2023): Research on the green preparation of manufactured sand by tuff produced in Gansu China and its influence on the properties of concrete. Dans: Construction and Building Materials, v. 409 (décembre 2023).
- (2024): Reactive molecular dynamics study on carbon steel corrosion induced by chloride: Effects of applied potential and temperature. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2023): Review of new methods for resource utilisation of electrolytic manganese residue and its application in building materials. Dans: Construction and Building Materials, v. 401 (octobre 2023).
- (2020): Predesigning matrix-directed super-hydrophobization and hierarchical strengthening of cement foam. Dans: Cement and Concrete Research, v. 131 (mai 2020).
- (2023): Study on comprehensive morphological parameters of manufactured sand based on CT scanning and entropy method and its application in rheology of manufactured sand mortar. Dans: Construction and Building Materials, v. 370 (mars 2023).
- (2023): Research on damping properties and microscopic mechanism of polyurethane cement-based composites. Dans: Construction and Building Materials, v. 365 (février 2023).
- (2022): Short Review on the Application of Recycled Powder in Cement-Based Materials: Preparation, Performance and Activity Excitation. Dans: Buildings, v. 12, n. 10 (20 septembre 2022).
- (2022): Study on axial compressive behavior and damage constitutive model of manufactured sand concrete based on fluidity optimization. Dans: Construction and Building Materials, v. 345 (août 2022).
- (2022): Solidification mechanisms of copper in ferrite-rich Portland cement and its action mechanism in mineral phase. Dans: Journal of Building Engineering, v. 58 (octobre 2022).
- (2022): Relationship between water transport behaviour and interlayer voids of 3D printed concrete. Dans: Construction and Building Materials, v. 326 (avril 2022).
- (2022): Study on evaluation of elastic modulus of crumb rubber concrete in meso-scale. Dans: Construction and Building Materials, v. 331 (mai 2022).
- (2021): Structural kinetics constitutive models for characterizing the time-dependent rheologic behaviors of fresh cement paste. Dans: Construction and Building Materials, v. 276 (mars 2021).
- (2022): Steel fiber orientational distribution and effects on 3D printed concrete with coarse aggregate. Dans: Materials and Structures, v. 55, n. 3 (19 mars 2022).
- (2021): Study on dynamic and static structural build-up of fresh cement paste with limestone powder based on structural kinetics model. Dans: Construction and Building Materials, v. 305 (octobre 2021).
- (2019): Rheological and harden properties of the high-thixotropy 3D printing concrete. Dans: Construction and Building Materials, v. 201 (mars 2019).
- (2014): Solid Phases Percolation and Capillary Pores Depercolation in Hydrating Cement Pastes. Dans: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 12 (décembre 2014).
- (2017): Study of depassivation of carbon steel in simulated concrete pore solution using different equivalent circuits. Dans: Construction and Building Materials, v. 157 (décembre 2017).
- (2017): Study on microstructure and bond strength of interfacial transition zone between cement paste and high-performance lightweight aggregates prepared from ferrochromium slag. Dans: Construction and Building Materials, v. 142 (juillet 2017).
- (2015): Potential Use of Foamed Mortar (FM) for Thermal Upgrading of Chinese Traditional Hui-Style Residences. Dans: International Journal of Architectural Heritage, v. 9, n. 7 (novembre 2015).
- (2005): Short Fiber Reinforced Geopolymer Composites Manufactured by Extrusion. Dans: Journal of Materials in Civil Engineering (ASCE), v. 17, n. 6 (décembre 2005).
Structurae coopère avec
