Lihua Zhang 
- : Computational modeling of three-dimensional slope reinforcement by anchor cable micropile group considering coordinated deformation. Dans: European Journal of Environmental and Civil Engineering.
- (2024): New elucidating into the microstructural evolution mechanisms and micromechanical properties of C4AF and gypsum synergistic hydration. Dans: Construction and Building Materials, v. 449 (octobre 2024).
- (2024): Effect of graphene oxide on hydration and performance of phosphogypsum-based self-leveling materials used for floor heating backfill. Dans: Construction and Building Materials, v. 449 (octobre 2024).
- (2024): Deterioration laws of static and fatigue bond performance between rebar and concrete with initial cracks under salt-freeze conditions. Dans: Construction and Building Materials, v. 452 (novembre 2024).
- (2024): Shaking Table Model Tests and Stability Analysis of Slopes Reinforced with New Anti-Seismic Anchor Cables. Dans: KSCE Journal of Civil Engineering, v. 28, n. 11 (3 octobre 2024).
- (2024): Review: The formation, characteristics, and resource utilization of lithium slag. Dans: Construction and Building Materials, v. 432 (juin 2024).
- (2024): The preparation and formation mechanism of ferrochrome slag-based high-strength ceramic aggregate and its impact on the performance of concrete. Dans: Construction and Building Materials, v. 422 (avril 2024).
- (2024): A critical review of the material characteristics, utilizations, limitations, and advanced applications of ferrochrome slag. Dans: Construction and Building Materials, v. 426 (mai 2024).
- (2024): Shaking table test for seismic performance of rock slope reinforced by C&S–R anchor cables. Dans: Soil Dynamics and Earthquake Engineering, v. 180 (mai 2024).
- (2023): Evaluation and control of printability and rheological properties of 3D-printed rubberized concrete. Dans: Journal of Building Engineering, v. 80 (décembre 2023).
- (2023): A novel compact bolted-type piezoelectric actuator excited by two excitation methods: design, simulation, and experimental investigation. Dans: Smart Materials and Structures, v. 32, n. 5 (mars 2023).
- (2023): Seismic performance of reinforced concrete beam‐column joint made of post‐filling coarse aggregate concrete. Dans: Structural Concrete, v. 24, n. 1 (février 2023).
- (2023): Effect of multifunctional modification of waste rubber powder on the workability and mechanical behavior of cement-based materials. Dans: Construction and Building Materials, v. 363 (janvier 2023).
- (2022): Investigation on the influence of modified waste rubber powder on the abrasion resistance of concrete. Dans: Construction and Building Materials, v. 357 (novembre 2022).
- (2023): Performance of damaged concrete stub columns strengthened with post-tensioned CFRP under freezing-thawing environment. Dans: Structures, v. 47 (janvier 2023).
- (2022): Evaluation of the Stress–Strain Behavior of Rubberized Concrete under Quasi-Static Compression. Dans: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 11 (novembre 2022).
- (2022): Effect of Hydration Process on Properties and Microstructure of Coal Gangue Admixture Concrete. Dans: KSCE Journal of Civil Engineering, v. 26, n. 8 (1 juillet 2022).
- (2022): Study on evaluation of elastic modulus of crumb rubber concrete in meso-scale. Dans: Construction and Building Materials, v. 331 (mai 2022).
- (2022): Effect of air-cooled blast furnace slag aggregate on mechanical properties of ultra-high-performance concrete. Dans: Case Studies in Construction Materials, v. 16 (juin 2022).
- (2022): Stress prediction of bridges using ANSYS soft and general regression neural network. Dans: Structures, v. 40 (juin 2022).
- (2021): Stress Distribution in Microregion of Core–Shell Structure Lightweight Aggregate Concrete. Dans: Buildings, v. 11, n. 11 (8 novembre 2021).
- (2021): Shear Behavior of Reinforced Post-Filling Coarse Aggregate Concrete Beams Produced by Creative Construction Process. Dans: Buildings, v. 11, n. 12 (23 novembre 2021).
- (2021): Flexural performance of reinforced concrete beams made by innovative post-filling coarse aggregate process. Dans: Advances in Structural Engineering, v. 24, n. 13 (juin 2021).
- (2021): Experimental study of axial compression of reinforced concrete columns made by environment‐friendly post‐filling coarse aggregate process. Dans: Structural Concrete, v. 22, n. 3 (avril 2021).
- (2021): Steel reinforced post-filling coarse aggregate concrete columns under eccentric compression. Dans: Construction and Building Materials, v. 270 (février 2021).
- (2012): Some Qualitative Properties of the Vibration Modes of the Continuous System of a Beam with One or Two Overhangs. Dans: Journal of Engineering Mechanics (ASCE), v. 138, n. 8 (août 2012).
- (2019): Effect of superabsorbent polymers on the drying and autogenous shrinkage properties of self-leveling mortar. Dans: Construction and Building Materials, v. 201 (mars 2019).
- (2015): Influence of burning temperature and cooling methods on strength of high carbon ferrochrome slag lightweight aggregate. Dans: Construction and Building Materials, v. 93 (septembre 2015).
- (2017): Study on microstructure and bond strength of interfacial transition zone between cement paste and high-performance lightweight aggregates prepared from ferrochromium slag. Dans: Construction and Building Materials, v. 142 (juillet 2017).
- (2014): Chloride diffusion in concrete subjected to compressive loading. Dans: Magazine of Concrete Research, v. 66, n. 19 (octobre 2014).
Structurae coopère avec
