0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Shear Behavior of Reinforced Post-Filling Coarse Aggregate Concrete Beams Produced by Creative Construction Process

Auteur(s):
ORCID


ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 12, v. 11
Page(s): 576
DOI: 10.3390/buildings11120576
Abstrait:

Different from the traditional concrete mixing procedure, the innovative post-filling coarse aggregate concrete (PFCC) reduces the cost of pumping concrete by increasing the coarse aggregate content and reducing the usage of cement. Previous studies have shown that PFCC enhances the compressive strength, elastic modulus, and flexural strength of concrete. In this paper, the shear behavior of 13 post-filling coarse aggregate concrete beams and 3 control beams was tested to determine the relationships between the shear performance of the beam and the post-filling coarse aggregate ratio, concrete strength grade, shear span ratio and stirrup reinforcement ratio. The results showed that the ultimate shear capacity of beam specimen increases first and then decreases with the increase in post-filling coarse aggregate ratio, reaching the maximum at 15% post-filling ratio. The results also indicated that the ultimate shear capacity of the beam increases with the increase in concrete strength grade and stirrup ratio. However, experimental results exhibited that the ultimate shear capacity decreases as the shear span ratio increases. This study provides a reference for the application of post-filling coarse aggregate concrete in engineering practice.

Copyright: © 2021 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10639385
  • Publié(e) le:
    30.11.2021
  • Modifié(e) le:
    02.12.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine