Li Wang 
- (2024): Study on the early structural strength of a hardened GGBFS-based plugging slurry activated by alkali. Dans: Construction and Building Materials, v. 433 (juin 2024).
- (2024): Vertical dynamic measurements of a railway transition zone: a case study in Sweden. Dans: Journal of Civil Structural Health Monitoring, v. 14, n. 4 (février 2024).
- (2023): Study of the Roof Deformation Characteristics of Roadway Excavation Face and Unsupported Roof Distance. Dans: Advances in Civil Engineering, v. 2023 (février 2023).
- (2023): A Three-Stage Dynamic Risk Model for Metro Shield Tunnel Construction. Dans: KSCE Journal of Civil Engineering, v. 28, n. 2 (décembre 2023).
- (2023): A water spraying box and its improving effect on the thermal environment around multi-story residential buildings to reduce released heat from air-conditioning units. Dans: Energy and Buildings, v. 297 (octobre 2023).
- (2023): Satisfaction Evaluation for Underpass Green Spaces in Mountainous Cities under the Perspective of Environmental Perception. Dans: Buildings, v. 13, n. 6 (23 mai 2023).
- (2023): Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D-Printed Mortar. Dans: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (juin 2023).
- (2023): Size effects in cavern model tests based on 3D printing. Dans: Tunnelling and Underground Space Technology, v. 137 (juillet 2023).
- (2022): Seismic response analysis of buried oil and gas pipeline under bidirectional multi-point excitation. Dans: Soil Dynamics and Earthquake Engineering, v. 162 (novembre 2022).
- (2022): Study on the compatibility between polyurethane and asphalt based on experiment and molecular dynamics simulation. Dans: Case Studies in Construction Materials, v. 17 (décembre 2022).
- (2022): Study on confinement mechanism of core concrete in steel tubular-corrugated steel plate confined concrete columns. Dans: Journal of Building Engineering, v. 52 (juillet 2022).
- (2022): Strength-constrained simultaneous optimization of topology and fiber orientation of fiber-reinforced composite structures for additive manufacturing. Dans: Advances in Structural Engineering, v. 25, n. 7 (avril 2022).
- (2022): Study on vertical vibration and transmission characteristics of railway ballast using impact hammer test. Dans: Construction and Building Materials, v. 316 (janvier 2022).
- (2012): Thickness Design of PCC/FBC Composites for Secondary/County Roads. Dans: Journal of Transportation Engineering, v. 138, n. 8 (août 2012).
- (2021): Strength test of 3D printed artificial rock mass with pre-existing fracture. Dans: Underground Space, v. 6, n. 5 (octobre 2021).
- (2021): Shaking Table Test on the Seismic Response of Buried Oil and Gas Pipelines under the Bidirectional Nonuniform Seismic Excitation. Dans: Advances in Civil Engineering, v. 2021 (janvier 2021).
- (2021): Wheel-rail impact at an insulated rail joint in an embedded rail system. Dans: Engineering Structures, v. 246 (novembre 2021).
- (2021): Test Study on the Air Permeability of Remolded Q3 Malan Loess. Dans: KSCE Journal of Civil Engineering, v. 25, n. 8 (juin 2021).
- (2020): Solid-Phase Fe(II)-Mediated Autotrophic Denitrification for Nitrate Removal from Wastewater with a Low Carbon-to-Nitrogen Ratio. Dans: Journal of Environmental Engineering (ASCE), v. 146, n. 7 (juillet 2020).
- (2012): Quantitative Evaluation for Coupling Coordinated Development between Ecosystem and Economic System—Case Study of Chinese Loess Plateau. Dans: Journal of Urban Planning and Development, v. 138, n. 4 (décembre 2012).
- (2019): Spatial Differentiation and Equalization of Medical Service Based on Accessibility of Urban Public Transport: A Case Study of Dalian. Dans: Journal of Highway and Transportation Research and Development (English Edition), v. 13, n. 2 (juin 2019).
- (2021): A simple and effective Measurement-Changes-Correction strategy for damage identification with aleatoric and epistemic model errors. Dans: Structural Health Monitoring, v. 20, n. 3 (janvier 2021).
- (2020): Recycling of construction and demolition waste to fabricate cost-effective anorthite ceramic membranes for enhanced separation of an oil-in-water emulsion. Dans: Construction and Building Materials, v. 265 (décembre 2020).
- (2020): Strength and ductility enhancement of 3D printing structure reinforced by embedding continuous micro-cables. Dans: Construction and Building Materials, v. 264 (décembre 2020).
- (2020): Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers. Dans: Construction and Building Materials, v. 241 (avril 2020).
- (2017): Wind-induced interference effects on low-rise buildings with gable roof. Dans: Journal of Wind Engineering and Industrial Aerodynamics, v. 170 (novembre 2017).
- (2018): Study on the Seasonal Estuarine Turbidity Maximum Variations of the Yangtze Estuary, China. Dans: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 144, n. 3 (mai 2018).
- (2017): Visualization of the three-dimensional structure and stress field of aggregated concrete materials through 3D printing and frozen-stress techniques. Dans: Construction and Building Materials, v. 143 (juillet 2017).
- (2005): Water resources management in Beijing using economic input–output modeling. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 32, n. 4 (août 2005).
- (2017): Smart monitoring of underground railway by local energy generation. Dans: Underground Space, v. 2, n. 4 (décembre 2017).
Structurae coopère avec
