Tomaso Trombetti 
- (2023): Wire‐and‐Arc Additive Manufacturing for lattice steel structures: overview of the experimental characterization on dot‐by‐dot rods. Dans: ce/papers, v. 6, n. 3-4 (septembre 2023).
- (2023): Strength reduction curves for corroded seven‐wire strands. Dans: ce/papers, v. 6, n. 5 (septembre 2023).
- (2016): A Structural Analysis of the Modena Cathedral. Dans: International Journal of Architectural Heritage, v. 10, n. 2-3 (janvier 2016).
- (2023): Stress-based form-finding of gridshells for Wire-and-Arc Additive Manufacturing considering overhang constraints. Dans: Engineering Structures, v. 279 (mars 2023).
- (2021): Seismic Design and Performances of Frame Structures Connected to a Strongback System and Equipped with Different Configurations of Supplemental Viscous Dampers. Dans: Frontiers in Built Environment, v. 7 (janvier 2021).
- (2021): A time domain approach for data interpretation from long‐term static monitoring of historical structures. Dans: Structural Control and Health Monitoring, v. 28, n. 5 (12 avril 2021).
- (2019): Optimization studies on diagrid columns realized with Wire-and-Arc Additive Manufacturing process. Présenté pendant: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2021): On the influence of the geometrical irregularities in the mechanical response of Wire-and-Arc Additively Manufactured planar elements. Dans: Journal of Constructional Steel Research, v. 178 (mars 2021).
- (2021): Simultaneous design of the topology and the build orientation of Wire-and-Arc Additively Manufactured structural elements. Dans: Computers & Structures, v. 242 (janvier 2021).
- (2018): Seismic-Proof Buildings in Developing Countries. Dans: Frontiers in Built Environment, v. 3 (février 2018).
- (2011): Seismic design of a precast r.c. structure equipped with viscous dampers. Dans: Earthquakes and Structures, v. 2, n. 3 (septembre 2011).
- (2014): On the seismic behavior of a reinforced concrete building with masonry infills collapsed during the 2009 L'Aquila earthquake. Dans: Earthquakes and Structures, v. 6, n. 1 (janvier 2014).
- (2011): A Special Solution for Lateral-Resisting Systems Capable of Multiple Seismic Performances. Présenté pendant: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011.
- (2017): On the peak inter-storey drift and peak inter-storey velocity profiles for frame structures. Dans: Soil Dynamics and Earthquake Engineering, v. 94 (mars 2017).
- (2016): Stochastic-based damping reduction factors. Dans: Soil Dynamics and Earthquake Engineering, v. 80 (janvier 2016).
- (2007): Physical and Numerical Approaches for the Optimal Insertion of Seismic Viscous Dampers in Shear-Type Structures. Dans: Journal of Earthquake Engineering, v. 11, n. 5 ( 2007).
- (2008): Numerical Verification of the Effectiveness of the "Alpha" Method for the Estimation of the Maximum Rotational Elastic Response of Eccentric Systems. Dans: Journal of Earthquake Engineering, v. 12, n. 2 ( 2008).
- (2016): Shaking-table tests of flat-bottom circular silos containing grain-like material. Dans: Earthquake Engineering and Structural Dynamics, v. 45, n. 1 (janvier 2016).
- (2013): Results of pseudo-static tests with cyclic horizontal load on cast in situ sandwich squat concrete walls. Dans: Engineering Structures, v. 54 (septembre 2013).
- (2014): Multi-performance seismic design through an enhanced first-storey isolation system. Dans: Engineering Structures, v. 59 (février 2014).
- (2013): Physically-based prediction of the maximum corner displacement magnification of one-storey eccentric systems. Dans: Bulletin of Earthquake Engineering, v. 11, n. 5 (mars 2013).
- (2012): On the evaluation of the horizontal forces produced by grain-like material inside silos during earthquakes. Dans: Bulletin of Earthquake Engineering, v. 10, n. 5 (mai 2012).
- (2015): Peak velocities estimation for a direct five-step design procedure of inter-storey viscous dampers. Dans: Bulletin of Earthquake Engineering, v. 14, n. 2 (octobre 2015).
- (2013): On the dimensioning of viscous dampers for the mitigation of the earthquake-induced effects in moment-resisting frame structures. Dans: Bulletin of Earthquake Engineering, v. 11, n. 6 (juin 2013).
- (2015): Seismic Modal Contribution Factors. Dans: Bulletin of Earthquake Engineering, v. 13, n. 10 (avril 2015).
- (2014): Preliminary interpretation of shaking-table response of a full-scale 3-storey building composed of thin reinforced concrete sandwich walls. Dans: Engineering Structures, v. 76 (octobre 2014).
- (2014): A statistical study on the peak ground parameters and amplification factors for an updated design displacement spectrum and a criterion for the selection of recorded ground motions. Dans: Engineering Structures, v. 76 (octobre 2014).
- (2015): Refinements to the Silvestri's theory for the evaluation of the seismic actions in flat-bottom silos containing grain-like material. Dans: Bulletin of Earthquake Engineering, v. 13, n. 11 (mai 2015).
- (2016): Seismic horizontal forces exerted by granular material on flat bottom silos: experimental and analytical results. Présenté pendant: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2010): Stiffness-Strength-Ductility Design Approach: an application to a five-storey steel building structure. Présenté pendant: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
Structurae coopère avec
