Tomaso Trombetti 
- (2024): Investigation on the elastic flexural stiffness of dot-by-dot wire-and-arc additively manufactured stainless steel bars. In: Engineering Structures, v. 306 (Mai 2024).
- (2023): A multi-performance seismic design procedure to incorporate Crescent Shaped Braces in mid-rise frame structures. In: Soil Dynamics and Earthquake Engineering, v. 164 (Januar 2023).
- (2022): Mechanical response of dot-by-dot wire-and-arc additively manufactured 304L stainless steel bars under tensile loading. In: Construction and Building Materials, v. 318 (Februar 2022).
- (2021): Comprehensive Review on the Dynamic and Seismic Behavior of Flat-Bottom Cylindrical Silos Filled With Granular Material. In: Frontiers in Built Environment, v. 7 (Januar 2021).
- (2021): Experimental behaviour of Wire‐and‐Arc Additively Manufactured stainless steel rods. In: ce/papers, v. 4, n. 2-4 (September 2021).
- (2021): Analytical estimation of the key performance points of the tensile force-displacement response of Crescent Shaped Braces. In: Soil Dynamics and Earthquake Engineering, v. 148 (September 2021).
- (2003): Inserting the mass proportional damping (MPD) system in a concrete shear-type structure. In: Structural Engineering and Mechanics, v. 16, n. 2 (August 2003).
- (2020): Assessment of design mechanical parameters and partial safety factors for Wire-and-Arc Additive Manufactured stainless steel. In: Engineering Structures, v. 225 (Dezember 2020).
- (2021): Estimating Fundamental Dynamic Properties of Structures with Supplemental Dampers by Means of Generalized Single Degree of Freedom Systems. In: Journal of Earthquake Engineering, v. 26, n. 7 (März 2021).
- (2020): Long-Term Seismometric Monitoring of the Two Towers of Bologna (Italy): Modal Frequencies Identification and Effects Due to Traffic Induced Vibrations. In: Frontiers in Built Environment, v. 6 (Januar 2020).
- (2020): High performance mortar for ductile seismic-resistant unreinforced masonry systems. In: Construction and Building Materials, v. 245 (Juni 2020).
- (2015): An approach for the mechanical characterisation of the Asinelli Tower (Bologna) in presence of insufficient experimental data. In: Journal of Cultural Heritage, v. 16, n. 4 (Juli 2015).
- (2019): Innovative Methodologies for Resilient Buildings and Cities. In: Frontiers in Built Environment, v. 5 (November 2019).
- (2016): Application of a Direct Procedure for the Seismic Retrofit of a R/C School Building Equipped with Viscous Dampers. In: Frontiers in Built Environment, v. 1 (Januar 2016).
- (2014): The first year of activities of the "Observatory Claudio Ceccoli", on the defects of the building structures. Vorgetragen bei: IABSE Symposium: Engineering for Progress, Nature and People, Madrid, Spain, 3-5 September 2014.
- (2004): Added Viscous Dampers In Shear-Type Structures: the Effectiveness of Mass Proportional Damping. In: Journal of Earthquake Engineering, v. 8, n. 2 ( 2004).
- (2010): A Five-Step Procedure for the Dimensioning of Viscous Dampers to Be Inserted in Building Structures. In: Journal of Earthquake Engineering, v. 14, n. 3 ( 2010).
- (2015): Italy's new forensic engineering research centre: a progress report. In: Proceedings of the Institution of Civil Engineers - Forensic Engineering, v. 168, n. 1 (Februar 2015).
- (2015): Crescent shaped braces for the seismic design of building structures. In: Materials and Structures, v. 48, n. 5 (Mai 2015).
- (2016): Experimentally-validated modelling of thin RC sandwich walls subjected to seismic loads. In: Engineering Structures, v. 119 (Juli 2016).
- (2013): Force reduction factor for building structures equipped with added viscous dampers. In: Bulletin of Earthquake Engineering, v. 11, n. 5 (März 2013).
- (2016): A comprehensive study on the seismic response of one-storey asymmetric systems. In: Bulletin of Earthquake Engineering, v. 15, n. 4 (November 2016).
- (2017): Experimental tests on Crescent Shaped Braces hysteretic devices. In: Engineering Structures, v. 144 (August 2017).
- (2018): A "direct five-step procedure" for the preliminary seismic design of buildings with added viscous dampers. In: Engineering Structures, v. 173 (Oktober 2018).
- (2018): Coupled Response of Frame Structures Connected to a Strongback. In: Journal of Structural Engineering (ASCE), v. 144, n. 9 (September 2018).
- (2016): Experimental assessment of a new steel hysteretic device: Crescent Shaped Brace. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2016): Application of the Equivalent Static Analysis procedure for the seismic design of buildings with added viscous dampers. Vorgetragen bei: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2010): A case study of a building in L’Aquila, Italy for evaluating the effects of masonry infills on the seismic behavior of r.c. frame structures. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2010): Identification Of Uniform Hazard Time Histories for Seismic Design. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
- (2010): Correlations Between the Experimental Results of Pseudo-Static Tests with Cyclic Horizontal Load on Concrete/Polystyrene Sandwich Bearing Panels and their analytical counterparts. Vorgetragen bei: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.
Structurae kooperiert mit
