-
Temple, Murray C. (1977): Buckling of Stayed Columns. Dans: Journal of the Structural Division (ASCE), v. 103, n. 4 (avril 1977).
https://doi.org/10.1061/jsdeag.0004610
-
Hafez, Hisham H. / Temple, Murray C. / Ellis, John S. (1979): Pretensioning of Single-Crossarm Stayed Columns. Dans: Journal of the Structural Division (ASCE), v. 105, n. 2 (février 1979).
https://doi.org/10.1061/jsdeag.0005098
-
Temple, Murray C. / Abdel-Sayed, George (1979): Fatigue Experiments on Composite Slab Floors. Dans: Journal of the Structural Division (ASCE), v. 105, n. 7 (juillet 1979).
https://doi.org/10.1061/jsdeag.0005201
-
Hathout, Ibrahim A. / Ellis, John S. / Temple, Murray C. (1979): Buckling of Space Stayed Columns. Dans: Journal of the Structural Division (ASCE), v. 105, n. 9 (septembre 1979).
https://doi.org/10.1061/jsdeag.0005231
-
Wong, Kevin C. / Temple, Murray C. (1982): Stayed Column with Initial Imperfection. Dans: Journal of the Structural Division (ASCE), v. 108, n. 7 (juillet 1982).
https://doi.org/10.1061/jsdeag.0005992
-
Temple, Murray C. / Mok, Kenneth Hon-Wa (1990): Starred angles supporting secondary trusses. Dans: Journal of Constructional Steel Research, v. 17, n. 4 (janvier 1990).
https://doi.org/10.1016/0143-974x(90)90079-v
-
Temple, Murray C. / Prakash, M. V. / Ellis, John S. (1984): Failure Criteria for Stayed Columns. Dans: Journal of Structural Engineering (ASCE), v. 110, n. 11 (novembre 1984).
https://doi.org/10.1061/(asce)0733-9445(1984)110:11(2677)
-
Temple, Murray C. / Prakash, M. V. (1990): Prestressed Lattice Frames with Intersecting and Offset Diagonals. Dans: Journal of Structural Engineering (ASCE), v. 116, n. 7 (juillet 1990).
https://doi.org/10.1061/(asce)0733-9445(1990)116:7(1923)
-
Temple, Murray C. / Prakash, M. V. (1990): Prestressed Slender Lattice Frames. Dans: Journal of Structural Engineering (ASCE), v. 116, n. 7 (juillet 1990).
https://doi.org/10.1061/(asce)0733-9445(1990)116:7(1943)
-
Madugula, Murty K. S. / Prabhu, T. S. / Temple, Murray C. (1983): Ultimate strength of concentrically loaded cold-formed angles. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 10, n. 1 (mars 1983).
https://doi.org/10.1139/l83-008
-
Temple, Murray C. / Racic, Dan / Pavlica, Sandy (1984): Floor trusses subjected to a concentrated load. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 11, n. 2 (juin 1984).
https://doi.org/10.1139/l84-049
-
Temple, Murray C. / Sakla, Sherief S. S. (1998): Single-angle compression members welded by one leg to a gusset plate. I. Experimental study. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 25, n. 3 (juin 1998).
https://doi.org/10.1139/l97-116
-
Temple, Murray C. / Sakla, Sherief S. S. (1998): Single-angle compression members welded by one leg to a gusset plate. II. A parametric study and design equation. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 25, n. 3 (juin 1998).
https://doi.org/10.1139/l97-118
-
Temple, Murray C. / Schepers, J. Albert / Kennedy, D. J. Laurie (1986): Interconnection of starred angle compression members. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 13, n. 6 (décembre 1986).
https://doi.org/10.1139/l86-095
-
Temple, Murray C. / McCloskey, David C. / Calabrese, Joseph M. (1987): Interconnection of boxed angle compression members. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 14, n. 4 (août 1987).
https://doi.org/10.1139/l87-078
-
Temple, Murray C. (1990): Connectors for double angles – interconnectors or battens. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 17, n. 1 (février 1990).
https://doi.org/10.1139/l90-002
-
Temple, Murray C. / Mok, Kenneth Hon-Wa (1991): Starred angles supporting secondary trusses. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 18, n. 1 (février 1991).
https://doi.org/10.1139/l91-014
-
Temple, Murray C. / Loong, Chun-Wah Bernard / Monforton, Gerard R. (1991): Uplift resistance of interior footings of low-rise buildings. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 18, n. 3 (juin 1991).
https://doi.org/10.1139/l91-048
-
Monforton, Gerard R. / Temple, Murray C. / Wolf, Gerhard W. H. (1993): An experimental and theoretical evaluation of a floor truss system. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 20, n. 3 (juin 1993).
https://doi.org/10.1139/l93-056
-
Temple, Murray C. / Elmahdy, Ghada (1993): Equivalent slenderness ratio for built-up members. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 20, n. 4 (août 1993).
https://doi.org/10.1139/l93-087
-
Temple, Murray C. / Elmahdy, Ghada (1993): Buckling of built-up compression members in the plane of the connectors. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 20, n. 6 (décembre 1993).
https://doi.org/10.1139/l93-122
-
Temple, Murray C. / Elmahdy, Ghada (1995): Local effective length factor in the equivalent slenderness ratio. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 22, n. 6 (décembre 1995).
https://doi.org/10.1139/l95-134
-
Temple, Murray C. / Petretta, Davide M. / Morand, Catherine (1995): Influence of the assumed effective length factor on the load carrying capacity of steel angles in compression. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 22, n. 6 (décembre 1995).
https://doi.org/10.1139/l95-135
-
Temple, Murray C. / Sakla, Sherief S. S. / Stchyrba, David / Ellis, Douglas (1994): Arrangement of interconnectors for starred angle compression members. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 21, n. 1 (février 1994).
https://doi.org/10.1139/l94-007
-
Temple, Murray C. / Sakla, Sherief S. S. (1994): Balanced and unbalanced welds for angle compression members. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 21, n. 3 (juin 1994).
https://doi.org/10.1139/l94-043
-
Temple, Murray C. / Sakla, Sherief S. S. (1996): Considerations for the design of single-angle compression members attached by one leg. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 23, n. 1 (février 1996).
https://doi.org/10.1139/l96-030
-
Temple, Murray C. (1996): Design of single-angle compression members according to the Canadian standards. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 23, n. 3 (juin 1996).
https://doi.org/10.1139/l96-872
-
Temple, Murray C. / Elmahdy, Ghada M. (1996): Slenderness ratio of main members between interconnectors of built-up compression members. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 23, n. 6 (décembre 1996).
https://doi.org/10.1139/l96-938
-
Temple, Murray C. / Tan, Joo Chai (1988): Interconnection of widely spaced angles. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 15, n. 4 (août 1988).
https://doi.org/10.1139/l88-094