0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Murray C. Temple

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Temple, Murray C. (1977): Buckling of Stayed Columns. In: Journal of the Structural Division (ASCE), v. 103, n. 4 (April 1977).

    https://doi.org/10.1061/jsdeag.0004610

  2. Hafez, Hisham H. / Temple, Murray C. / Ellis, John S. (1979): Pretensioning of Single-Crossarm Stayed Columns. In: Journal of the Structural Division (ASCE), v. 105, n. 2 (Februar 1979).

    https://doi.org/10.1061/jsdeag.0005098

  3. Temple, Murray C. / Abdel-Sayed, George (1979): Fatigue Experiments on Composite Slab Floors. In: Journal of the Structural Division (ASCE), v. 105, n. 7 (Juli 1979).

    https://doi.org/10.1061/jsdeag.0005201

  4. Hathout, Ibrahim A. / Ellis, John S. / Temple, Murray C. (1979): Buckling of Space Stayed Columns. In: Journal of the Structural Division (ASCE), v. 105, n. 9 (September 1979).

    https://doi.org/10.1061/jsdeag.0005231

  5. Wong, Kevin C. / Temple, Murray C. (1982): Stayed Column with Initial Imperfection. In: Journal of the Structural Division (ASCE), v. 108, n. 7 (Juli 1982).

    https://doi.org/10.1061/jsdeag.0005992

  6. Temple, Murray C. / Mok, Kenneth Hon-Wa (1990): Starred angles supporting secondary trusses. In: Journal of Constructional Steel Research, v. 17, n. 4 (Januar 1990).

    https://doi.org/10.1016/0143-974x(90)90079-v

  7. Temple, Murray C. / Prakash, M. V. / Ellis, John S. (1984): Failure Criteria for Stayed Columns. In: Journal of Structural Engineering (ASCE), v. 110, n. 11 (November 1984).

    https://doi.org/10.1061/(asce)0733-9445(1984)110:11(2677)

  8. Temple, Murray C. / Prakash, M. V. (1990): Prestressed Lattice Frames with Intersecting and Offset Diagonals. In: Journal of Structural Engineering (ASCE), v. 116, n. 7 (Juli 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:7(1923)

  9. Temple, Murray C. / Prakash, M. V. (1990): Prestressed Slender Lattice Frames. In: Journal of Structural Engineering (ASCE), v. 116, n. 7 (Juli 1990).

    https://doi.org/10.1061/(asce)0733-9445(1990)116:7(1943)

  10. Madugula, Murty K. S. / Prabhu, T. S. / Temple, Murray C. (1983): Ultimate strength of concentrically loaded cold-formed angles. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 10, n. 1 (März 1983).

    https://doi.org/10.1139/l83-008

  11. Temple, Murray C. / Racic, Dan / Pavlica, Sandy (1984): Floor trusses subjected to a concentrated load. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 11, n. 2 (Juni 1984).

    https://doi.org/10.1139/l84-049

  12. Temple, Murray C. / Sakla, Sherief S. S. (1998): Single-angle compression members welded by one leg to a gusset plate. I. Experimental study. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 25, n. 3 (Juni 1998).

    https://doi.org/10.1139/l97-116

  13. Temple, Murray C. / Sakla, Sherief S. S. (1998): Single-angle compression members welded by one leg to a gusset plate. II. A parametric study and design equation. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 25, n. 3 (Juni 1998).

    https://doi.org/10.1139/l97-118

  14. Temple, Murray C. / Schepers, J. Albert / Kennedy, D. J. Laurie (1986): Interconnection of starred angle compression members. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 13, n. 6 (Dezember 1986).

    https://doi.org/10.1139/l86-095

  15. Temple, Murray C. / McCloskey, David C. / Calabrese, Joseph M. (1987): Interconnection of boxed angle compression members. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 14, n. 4 (August 1987).

    https://doi.org/10.1139/l87-078

  16. Temple, Murray C. (1990): Connectors for double angles – interconnectors or battens. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 17, n. 1 (Februar 1990).

    https://doi.org/10.1139/l90-002

  17. Temple, Murray C. / Mok, Kenneth Hon-Wa (1991): Starred angles supporting secondary trusses. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 18, n. 1 (Februar 1991).

    https://doi.org/10.1139/l91-014

  18. Temple, Murray C. / Loong, Chun-Wah Bernard / Monforton, Gerard R. (1991): Uplift resistance of interior footings of low-rise buildings. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 18, n. 3 (Juni 1991).

    https://doi.org/10.1139/l91-048

  19. Monforton, Gerard R. / Temple, Murray C. / Wolf, Gerhard W. H. (1993): An experimental and theoretical evaluation of a floor truss system. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 20, n. 3 (Juni 1993).

    https://doi.org/10.1139/l93-056

  20. Temple, Murray C. / Elmahdy, Ghada (1993): Equivalent slenderness ratio for built-up members. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 20, n. 4 (August 1993).

    https://doi.org/10.1139/l93-087

  21. Temple, Murray C. / Elmahdy, Ghada (1993): Buckling of built-up compression members in the plane of the connectors. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 20, n. 6 (Dezember 1993).

    https://doi.org/10.1139/l93-122

  22. Temple, Murray C. / Elmahdy, Ghada (1995): Local effective length factor in the equivalent slenderness ratio. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 22, n. 6 (Dezember 1995).

    https://doi.org/10.1139/l95-134

  23. Temple, Murray C. / Petretta, Davide M. / Morand, Catherine (1995): Influence of the assumed effective length factor on the load carrying capacity of steel angles in compression. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 22, n. 6 (Dezember 1995).

    https://doi.org/10.1139/l95-135

  24. Temple, Murray C. / Sakla, Sherief S. S. / Stchyrba, David / Ellis, Douglas (1994): Arrangement of interconnectors for starred angle compression members. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 21, n. 1 (Februar 1994).

    https://doi.org/10.1139/l94-007

  25. Temple, Murray C. / Sakla, Sherief S. S. (1994): Balanced and unbalanced welds for angle compression members. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 21, n. 3 (Juni 1994).

    https://doi.org/10.1139/l94-043

  26. Temple, Murray C. / Sakla, Sherief S. S. (1996): Considerations for the design of single-angle compression members attached by one leg. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 23, n. 1 (Februar 1996).

    https://doi.org/10.1139/l96-030

  27. Temple, Murray C. (1996): Design of single-angle compression members according to the Canadian standards. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 23, n. 3 (Juni 1996).

    https://doi.org/10.1139/l96-872

  28. Temple, Murray C. / Elmahdy, Ghada M. (1996): Slenderness ratio of main members between interconnectors of built-up compression members. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 23, n. 6 (Dezember 1996).

    https://doi.org/10.1139/l96-938

  29. Temple, Murray C. / Tan, Joo Chai (1988): Interconnection of widely spaced angles. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 15, n. 4 (August 1988).

    https://doi.org/10.1139/l88-094

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine