Ray Kai Leung Su 
- : A review on serviceability of foam concrete. Dans: Proceedings of the Institution of Civil Engineers - Construction Materials.
- (2024): Effects of carbonation and sponge wetting solution on diffusion potential of carbonated concrete with supplementary cementitious materials. Dans: Construction and Building Materials, v. 430 (juin 2024).
- (2023): Experimental and theoretical study on seismic behavior of non-seismically designed shear walls with moderate shear span-to-length ratios. Dans: Journal of Building Engineering, v. 76 (octobre 2023).
- (2024): Effects of heat-treatment on physical and mechanical properties of limestone. Dans: Construction and Building Materials, v. 411 (janvier 2024).
- (2023): Assessment of out‐of‐plane structural defects using parallel laser line scanning system. Dans: Computer-Aided Civil and Infrastructure Engineering, v. 39, n. 6 (octobre 2023).
- (2023): Active Microvibration Control of Tool Platforms Installed on the Floors Subjected to Moving Vehicles in Industrial Factories. Dans: Structural Control and Health Monitoring, v. 2023 (février 2023).
- (2023): A Review on Durability of Foam Concrete. Dans: Buildings, v. 13, n. 7 (28 juin 2023).
- (2023): Influence of initial crack length on fracture properties of limestone using DIC technique. Dans: Construction and Building Materials, v. 403 (novembre 2023).
- (2022): Component damage‐based seismic fragility analysis of high‐rise building with transfer structure. Dans: The Structural Design of Tall and Special Buildings, v. 31, n. 18 (septembre 2022).
- (2021): Quantification of the actual expansion and deposition of rust in reinforced concrete. Dans: Construction and Building Materials, v. 297 (août 2021).
- (2022): Experimental study of corrosion-caused corner cracking using digital image correlation. Dans: Materials and Structures, v. 55, n. 4 (19 avril 2022).
- (2022): Fragility analysis of floor micro vibrations induced by internal vehicles in high technology factories. Dans: Structures, v. 40 (juin 2022).
- (2021): Experimental investigation of process of corrosion-induced cover delamination using digital image correlation. Dans: Construction and Building Materials, v. 312 (décembre 2021).
- (2021): Influence of rebar geometry on the steel-concrete interface of reinforced concrete. Dans: Construction and Building Materials, v. 304 (octobre 2021).
- (2021): Corrosion rate measurement by using polarization resistance method for microcell and macrocell corrosion: Theoretical analysis and experimental work with simulated concrete pore solution. Dans: Construction and Building Materials, v. 267 (janvier 2021).
- (2020): Framework to optimise two-dimensional DIC measurements at different orders of accuracy for concrete structures. Dans: Structures, v. 28 (décembre 2020).
- (2020): In-situ deformation modulus of rust in concrete under different levels of confinement and rates of corrosion. Dans: Construction and Building Materials, v. 255 (septembre 2020).
- (2020): Experimental investigation of the process of corrosion-caused cover cracking. Dans: Construction and Building Materials, v. 253 (août 2020).
- (2020): Effect of high rebar temperature during casting on corrosion in carbonated concrete. Dans: Construction and Building Materials, v. 249 (juillet 2020).
- (2020): Corner cracking model for non-uniform corrosion-caused deterioration of concrete covers. Dans: Construction and Building Materials, v. 234 (février 2020).
- (2013): Development of seismic fragility curves for low-rise masonry infilled reinforced concrete buildings by a coefficient-based method. Dans: Earthquake Engineering and Engineering Vibration, v. 12, n. 2 (juin 2013).
- (2019): Concrete cover delamination model for non-uniform corrosion of reinforcements. Dans: Construction and Building Materials, v. 223 (octobre 2019).
- (2020): Improved one-phase model of uniform corrosion for predicting volume of rust. Dans: Magazine of Concrete Research, v. 72, n. 21 (novembre 2020).
- (2019): A novel elastic-body-rotation model for concrete cover spalling caused by non-uniform corrosion of reinforcement. Dans: Construction and Building Materials, v. 213 (juillet 2019).
- (2016): Revisiting Unreinforced Strut Efficiency Factor. Dans: ACI Structural Journal, v. 113, n. 2 (mars 2016).
- (2017): Concrete cover tensile capacity of corroded reinforced concrete. Dans: Construction and Building Materials, v. 136 (avril 2017).
- (2015): Gravity-induced shear force in reinforced concrete walls above transfer structures. Dans: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 168, n. 1 (janvier 2015).
- (2013): Assessment of vibrations induced in factories by automated guided vehicles. Dans: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 166, n. 4 (avril 2013).
- (2012): Fragility analysis of low-rise masonry in-filled reinforced concrete buildings by a coefficient-based spectral acceleration method. Dans: Earthquake Engineering and Structural Dynamics, v. 41, n. 4 (10 avril 2012).
- (2019): Experimental assessment of the cyclic behaviour of concrete-filled steel tubular beam-columns with octagonal sections. Dans: Engineering Structures, v. 180 (février 2019).
Structurae coopère avec
