Ray Kai Leung Su 
- (2023): Experimental and theoretical study on seismic behavior of non-seismically designed shear walls with moderate shear span-to-length ratios. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2024): Effects of heat-treatment on physical and mechanical properties of limestone. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Assessment of out‐of‐plane structural defects using parallel laser line scanning system. In: Computer-Aided Civil and Infrastructure Engineering, v. 39, n. 6 (Oktober 2023).
- (2023): Active Microvibration Control of Tool Platforms Installed on the Floors Subjected to Moving Vehicles in Industrial Factories. In: Structural Control and Health Monitoring, v. 2023 (Februar 2023).
- (2023): A Review on Durability of Foam Concrete. In: Buildings, v. 13, n. 7 (28 Juni 2023).
- (2023): Influence of initial crack length on fracture properties of limestone using DIC technique. In: Construction and Building Materials, v. 403 (November 2023).
- (2022): Component damage‐based seismic fragility analysis of high‐rise building with transfer structure. In: The Structural Design of Tall and Special Buildings, v. 31, n. 18 (September 2022).
- (2021): Quantification of the actual expansion and deposition of rust in reinforced concrete. In: Construction and Building Materials, v. 297 (August 2021).
- (2022): Experimental study of corrosion-caused corner cracking using digital image correlation. In: Materials and Structures, v. 55, n. 4 (19 April 2022).
- (2022): Fragility analysis of floor micro vibrations induced by internal vehicles in high technology factories. In: Structures, v. 40 (Juni 2022).
- (2021): Experimental investigation of process of corrosion-induced cover delamination using digital image correlation. In: Construction and Building Materials, v. 312 (Dezember 2021).
- (2021): Influence of rebar geometry on the steel-concrete interface of reinforced concrete. In: Construction and Building Materials, v. 304 (Oktober 2021).
- (2021): Corrosion rate measurement by using polarization resistance method for microcell and macrocell corrosion: Theoretical analysis and experimental work with simulated concrete pore solution. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2020): Framework to optimise two-dimensional DIC measurements at different orders of accuracy for concrete structures. In: Structures, v. 28 (Dezember 2020).
- (2020): In-situ deformation modulus of rust in concrete under different levels of confinement and rates of corrosion. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): Experimental investigation of the process of corrosion-caused cover cracking. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Effect of high rebar temperature during casting on corrosion in carbonated concrete. In: Construction and Building Materials, v. 249 (Juli 2020).
- (2020): Corner cracking model for non-uniform corrosion-caused deterioration of concrete covers. In: Construction and Building Materials, v. 234 (Februar 2020).
- (2013): Development of seismic fragility curves for low-rise masonry infilled reinforced concrete buildings by a coefficient-based method. In: Earthquake Engineering and Engineering Vibration, v. 12, n. 2 (Juni 2013).
- (2019): Concrete cover delamination model for non-uniform corrosion of reinforcements. In: Construction and Building Materials, v. 223 (Oktober 2019).
- (2018): Seismic Axial Collapse of Shear Damaged Heavily Reinforced Shear Walls Experiencing Cyclic Tension–Compression Excursions: A Modified Mohr's Axial Capacity Model. In: Journal of Earthquake Engineering, v. 24, n. 10 (Mai 2018).
- (2020): Improved one-phase model of uniform corrosion for predicting volume of rust. In: Magazine of Concrete Research, v. 72, n. 21 (November 2020).
- (2019): A novel elastic-body-rotation model for concrete cover spalling caused by non-uniform corrosion of reinforcement. In: Construction and Building Materials, v. 213 (Juli 2019).
- (2016): Revisiting Unreinforced Strut Efficiency Factor. In: ACI Structural Journal, v. 113, n. 2 (März 2016).
- (2017): Concrete cover tensile capacity of corroded reinforced concrete. In: Construction and Building Materials, v. 136 (April 2017).
- (2015): Gravity-induced shear force in reinforced concrete walls above transfer structures. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 168, n. 1 (Januar 2015).
- (2013): Assessment of vibrations induced in factories by automated guided vehicles. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 166, n. 4 (April 2013).
- (2012): Fragility analysis of low-rise masonry in-filled reinforced concrete buildings by a coefficient-based spectral acceleration method. In: Earthquake Engineering and Structural Dynamics, v. 41, n. 4 (10 April 2012).
- (2019): Experimental assessment of the cyclic behaviour of concrete-filled steel tubular beam-columns with octagonal sections. In: Engineering Structures, v. 180 (Februar 2019).
Structurae kooperiert mit
