-
Kalendher, F. / Setunge, S. / Robert, D. / Mohaseni, H. (2018): Fragility Curves for concrete girder bridges under flood hazard.. Présenté pendant: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
https://doi.org/10.1201/9781315189390-324
-
Nasim, M. / Setunge, S. / Mohseni, H. / Zhou, S. W. (2018): Computational Investigation on the Piers of a U-Slab Bridge under Raising Flood Intensity. Présenté pendant: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
https://doi.org/10.1201/9781315189390-275
-
Tran, H. D. / Setunge, S. / Koay, Y.-C. / Luczak, H. (2018): Predictive modelling of the deterioration of Australian state bridge network. Présenté pendant: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
https://doi.org/10.1201/9781315189390-246
-
Qeshta, I. M. I. / Hashemi, M. J. / Gravina, R. J. / Setunge, S. (2018): Fragility analysis of non-ductile RC bridges subjected to extreme hydrodynamic forces. Présenté pendant: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
https://doi.org/10.1201/9781315189390-173
-
Dissanayake, A. P. / Setunge, S. / Venkatesan, S. / Moinuddin, K. A. M. / Sutherland, D. (2018): Numerical assessment of composite bridges subjected to Wildland Urban Interface (WUI) fires. Présenté pendant: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
https://doi.org/10.1201/9781315189390-169
-
Gravina, R. J. / Li, J. / Aydin, H. / Setunge, S. / Visintin, P. / Smith, S. T. / Al-Mahaidi, R. (2018): Bond Performance of F RP-Strengthened Reinforced Concrete In Aggressive Environmental Conditions. Présenté pendant: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
https://doi.org/10.1201/9781315189390-33
-
Tran, H. D. / Setunge, S. / Koay, Y.-C. / Luczak, H. (2018): What are the attributes of a superior bridge management system?. Présenté pendant: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
https://doi.org/10.1201/9781315189390-28
-
Tran, H. D. / Setunge, S. / Koay, Y.-C. / Luczak, H. (2018): A simulated maintenance costing using a Markov deterioration model for bridge components. Présenté pendant: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
https://doi.org/10.1201/9781315189390-17
-
Thevega, T. / Jayasinghe, J. A. S. C. / Robert, D. / Bandara, C. S. / Kandare, E. / Setunge, S. (2022): Fire compliance of construction materials for building claddings: A critical review. Dans: Construction and Building Materials, v. 361 (décembre 2022).
https://doi.org/10.1016/j.conbuildmat.2022.129582
-
Pooni, J. / Robert, D. / Gunasekara, C. / Giustozzi, F. / Setunge, S. (2021): Mechanism of Enzyme Stabilization for Expansive Soils Using Mechanical and Microstructural Investigation. Dans: International Journal of Geomechanics, v. 21, n. 10 (octobre 2021).
https://doi.org/10.1061/(asce)gm.1943-5622.0002164
-
Mendis, P. A. / Kovacic, D. / Setunge, S. (2000): Basis for the design of lateral reinforcement for high-strength concrete columns. Dans: Structural Engineering and Mechanics, v. 9, n. 6 (juin 2000).
https://doi.org/10.12989/sem.2000.9.6.589
-
Nirdosha, G. / Setunge, S. (2006): Formulation and process modeling of particleboard production using hardwood saw mill wastes using experimental design. Dans: Composite Structures, v. 75, n. 1-4 (septembre 2006).
https://doi.org/10.1016/j.compstruct.2006.04.044
-
Pooni, J. / Robert, D. / Giustozzi, F. / Setunge, S. / Xie, Y. M. / Xia, J. (2020): Novel use of calcium sulfoaluminate (CSA) cement for treating problematic soils. Dans: Construction and Building Materials, v. 260 (novembre 2020).
https://doi.org/10.1016/j.conbuildmat.2020.120433
-
Gravina, R. J. / Hadigheh, S. A. / Setunge, S. (2014): Interfacial bond strength of resin-impregnated fibre-reinforced polymer laminates bonded to concrete using vacuum and heat: Experimental study. Dans: Australian Journal of Structural Engineering, v. 15, n. 1 (janvier 2014).
https://doi.org/10.7158/s13-014.2014.15.2
-
Lokuge, W. P. / Sanjayan, J. G. / Setunge, S. (2002): Stress-strain relationship of high strength concrete subjected to cyclic loading. Présenté pendant: IABSE Symposium: Towards a Better Built Environment - Innovation, Sustainability, Information Technology, Melbourne, Australia, 11-13 September 2002.
https://doi.org/10.2749/222137802796337125
-
Hadigheh, S. A. / Gravina, R. J. / Setunge, S. (2016): Influence of the Processing Techniques on the Bond Characteristics in Externally Bonded Joints: Experimental and Analytical Investigations. Dans: Journal of Composites for Construction, v. 20, n. 3 (juin 2016).
https://doi.org/10.1061/(asce)cc.1943-5614.0000646
-
Alqhatani, M. / Setunge, S. / Mirodpour, S. (2014): Can a polycentric structure affect travel behaviour? A comparison of Melbourne, Australia and Riyadh, Saudi Arabia. Dans: Journal of Modern Transportation, v. 22, n. 3 (août 2014).
https://doi.org/10.1007/s40534-014-0054-y
-
Setunge, S. / Anaton, J. (2006): Composite model for basic creep of high-strength concrete. Dans: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 159, n. 2 (mai 2006).
https://doi.org/10.1680/coma.2006.159.2.77
-
Mendis, P. / Pendyala, R. / Setunge, S. (2000): Stress–strain model to predict the full-range moment curvature behaviour of high-strength concrete sections. Dans: Magazine of Concrete Research, v. 52, n. 4 (août 2000).
https://doi.org/10.1680/macr.2000.52.4.227
-
Lokuge, W. P. / Setunge, S. / Sanjayan, J. G. (2003): Modelling eccentrically loaded high-strength concrete columns. Dans: Magazine of Concrete Research, v. 55, n. 4 (août 2003).
https://doi.org/10.1680/macr.2003.55.4.331
-
Lokuge, W. P. / Sanjayan, J. G. / Setunge, S. (2003): Triaxial test results of high-strength concrete subjected to cyclic loading. Dans: Magazine of Concrete Research, v. 55, n. 4 (août 2003).
https://doi.org/10.1680/macr.2003.55.4.321
-
Zhu, W. / Setunge, S. / Gamage, N. / Gravina, R. / Venkatesan, S. (2017): Evaluating Time-Dependent Reliability and Probability of Failure of Reinforced-Concrete Bridge Components and Predicting Residual Capacity after Subsequent Rehabilitation. Dans: Journal of Performance of Constructed Facilities (ASCE), v. 31, n. 3 (juin 2017).
https://doi.org/10.1061/(asce)cf.1943-5509.0000975
-
Roychand, R. / De Silva, S. / Law, D. / Setunge, S. (2016): Micro and Nano Engineered High Volume Ultrafine Fly Ash Cement Composite with and without Additives. Dans: International Journal of Concrete Structures and Materials, v. 10, n. 1 (mars 2016).
https://doi.org/10.1007/s40069-015-0122-7
-
Candappa, D. C. / Sanjayan, J. G. / Setunge, S. (2001): Complete Triaxial Stress-Strain Curves of High-Strength Concrete. Dans: Journal of Materials in Civil Engineering (ASCE), v. 13, n. 3 (juin 2001).
https://doi.org/10.1061/(asce)0899-1561(2001)13:3(209)