0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

S. Setunge

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Kalendher, F. / Setunge, S. / Robert, D. / Mohaseni, H. (2018): Fragility Curves for concrete girder bridges under flood hazard.. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-324

  2. Nasim, M. / Setunge, S. / Mohseni, H. / Zhou, S. W. (2018): Computational Investigation on the Piers of a U-Slab Bridge under Raising Flood Intensity. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-275

  3. Tran, H. D. / Setunge, S. / Koay, Y.-C. / Luczak, H. (2018): Predictive modelling of the deterioration of Australian state bridge network. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-246

  4. Qeshta, I. M. I. / Hashemi, M. J. / Gravina, R. J. / Setunge, S. (2018): Fragility analysis of non-ductile RC bridges subjected to extreme hydrodynamic forces. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-173

  5. Dissanayake, A. P. / Setunge, S. / Venkatesan, S. / Moinuddin, K. A. M. / Sutherland, D. (2018): Numerical assessment of composite bridges subjected to Wildland Urban Interface (WUI) fires. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-169

  6. Gravina, R. J. / Li, J. / Aydin, H. / Setunge, S. / Visintin, P. / Smith, S. T. / Al-Mahaidi, R. (2018): Bond Performance of F RP-Strengthened Reinforced Concrete In Aggressive Environmental Conditions. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-33

  7. Tran, H. D. / Setunge, S. / Koay, Y.-C. / Luczak, H. (2018): What are the attributes of a superior bridge management system?. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-28

  8. Tran, H. D. / Setunge, S. / Koay, Y.-C. / Luczak, H. (2018): A simulated maintenance costing using a Markov deterioration model for bridge components. Vorgetragen bei: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-17

  9. Thevega, T. / Jayasinghe, J. A. S. C. / Robert, D. / Bandara, C. S. / Kandare, E. / Setunge, S. (2022): Fire compliance of construction materials for building claddings: A critical review. In: Construction and Building Materials, v. 361 (Dezember 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.129582

  10. Pooni, J. / Robert, D. / Gunasekara, C. / Giustozzi, F. / Setunge, S. (2021): Mechanism of Enzyme Stabilization for Expansive Soils Using Mechanical and Microstructural Investigation. In: International Journal of Geomechanics, v. 21, n. 10 (Oktober 2021).

    https://doi.org/10.1061/(asce)gm.1943-5622.0002164

  11. Mendis, P. A. / Kovacic, D. / Setunge, S. (2000): Basis for the design of lateral reinforcement for high-strength concrete columns. In: Structural Engineering and Mechanics, v. 9, n. 6 (Juni 2000).

    https://doi.org/10.12989/sem.2000.9.6.589

  12. Nirdosha, G. / Setunge, S. (2006): Formulation and process modeling of particleboard production using hardwood saw mill wastes using experimental design. In: Composite Structures, v. 75, n. 1-4 (September 2006).

    https://doi.org/10.1016/j.compstruct.2006.04.044

  13. Pooni, J. / Robert, D. / Giustozzi, F. / Setunge, S. / Xie, Y. M. / Xia, J. (2020): Novel use of calcium sulfoaluminate (CSA) cement for treating problematic soils. In: Construction and Building Materials, v. 260 (November 2020).

    https://doi.org/10.1016/j.conbuildmat.2020.120433

  14. Gravina, R. J. / Hadigheh, S. A. / Setunge, S. (2014): Interfacial bond strength of resin-impregnated fibre-reinforced polymer laminates bonded to concrete using vacuum and heat: Experimental study. In: Australian Journal of Structural Engineering, v. 15, n. 1 (Januar 2014).

    https://doi.org/10.7158/s13-014.2014.15.2

  15. Lokuge, W. P. / Sanjayan, J. G. / Setunge, S. (2002): Stress-strain relationship of high strength concrete subjected to cyclic loading. Vorgetragen bei: IABSE Symposium: Towards a Better Built Environment - Innovation, Sustainability, Information Technology, Melbourne, Australia, 11-13 September 2002.

    https://doi.org/10.2749/222137802796337125

  16. Hadigheh, S. A. / Gravina, R. J. / Setunge, S. (2016): Influence of the Processing Techniques on the Bond Characteristics in Externally Bonded Joints: Experimental and Analytical Investigations. In: Journal of Composites for Construction, v. 20, n. 3 (Juni 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000646

  17. Alqhatani, M. / Setunge, S. / Mirodpour, S. (2014): Can a polycentric structure affect travel behaviour? A comparison of Melbourne, Australia and Riyadh, Saudi Arabia. In: Journal of Modern Transportation, v. 22, n. 3 (August 2014).

    https://doi.org/10.1007/s40534-014-0054-y

  18. Setunge, S. / Anaton, J. (2006): Composite model for basic creep of high-strength concrete. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 159, n. 2 (Mai 2006).

    https://doi.org/10.1680/coma.2006.159.2.77

  19. Mendis, P. / Pendyala, R. / Setunge, S. (2000): Stress–strain model to predict the full-range moment curvature behaviour of high-strength concrete sections. In: Magazine of Concrete Research, v. 52, n. 4 (August 2000).

    https://doi.org/10.1680/macr.2000.52.4.227

  20. Lokuge, W. P. / Setunge, S. / Sanjayan, J. G. (2003): Modelling eccentrically loaded high-strength concrete columns. In: Magazine of Concrete Research, v. 55, n. 4 (August 2003).

    https://doi.org/10.1680/macr.2003.55.4.331

  21. Lokuge, W. P. / Sanjayan, J. G. / Setunge, S. (2003): Triaxial test results of high-strength concrete subjected to cyclic loading. In: Magazine of Concrete Research, v. 55, n. 4 (August 2003).

    https://doi.org/10.1680/macr.2003.55.4.321

  22. Zhu, W. / Setunge, S. / Gamage, N. / Gravina, R. / Venkatesan, S. (2017): Evaluating Time-Dependent Reliability and Probability of Failure of Reinforced-Concrete Bridge Components and Predicting Residual Capacity after Subsequent Rehabilitation. In: Journal of Performance of Constructed Facilities (ASCE), v. 31, n. 3 (Juni 2017).

    https://doi.org/10.1061/(asce)cf.1943-5509.0000975

  23. Roychand, R. / De Silva, S. / Law, D. / Setunge, S. (2016): Micro and Nano Engineered High Volume Ultrafine Fly Ash Cement Composite with and without Additives. In: International Journal of Concrete Structures and Materials, v. 10, n. 1 (März 2016).

    https://doi.org/10.1007/s40069-015-0122-7

  24. Candappa, D. C. / Sanjayan, J. G. / Setunge, S. (2001): Complete Triaxial Stress-Strain Curves of High-Strength Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 13, n. 3 (Juni 2001).

    https://doi.org/10.1061/(asce)0899-1561(2001)13:3(209)

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine