Jay Sanjayan 
- (2024): Tensile Stress-Strain Models for Steel Fiber Reinforced Concrete. Dans: Journal of Building Engineering, v. 96 (novembre 2024).
- (2024): Pumping-less 3D concrete printing using quick nozzle mixing. Dans: Automation in Construction, v. 166 (octobre 2024).
- (2024): Printhead mixing of geopolymer and OPC slurries for hybrid alkali-activated cement in 3D concrete printing. Dans: Construction and Building Materials, v. 430 (juin 2024).
- (2023): One-Year study of restrained shrinkage and creep behaviours of geopolymer concrete. Dans: Construction and Building Materials, v. 376 (mai 2023).
- (2023): Pore structure profile of ambient temperature-cured geopolymer concrete and its effect on engineering properties. Dans: Construction and Building Materials, v. 406 (novembre 2023).
- (2024): Quick nozzle mixing technology for 3D printing foam concrete. Dans: Journal of Building Engineering, v. 83 (avril 2024).
- (2023): Rapid early age strength development of in-line activated geopolymer for concrete 3D printing. Dans: Construction and Building Materials, v. 406 (novembre 2023).
- (2023): Shrinkage model for waste clay brick-based geopolymer concrete. Dans: Construction and Building Materials, v. 404 (novembre 2023).
- (2023): Tensile performance of cast-in headed studs in thin concrete panels with void formers. Dans: Construction and Building Materials, v. 402 (octobre 2023).
- (2017): Specimens size, aggregate size, and aggregate type effect on spalling of concrete in fire. Dans: Fire and Materials, v. 42, n. 1 (août 2017).
- (2023): Performance of cast-in anchors in early age concrete with supplementary cementitious materials. Dans: Materials and Structures, v. 56, n. 1 (30 janvier 2023).
- (2022): Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison. Dans: Buildings, v. 12, n. 8 (31 juillet 2022).
- (2022): Synthesis and performance of intumescent alkali-activated rice husk ash for fire-resistant applications. Dans: Journal of Building Engineering, v. 51 (juillet 2022).
- (2021): Synthesis and properties of thermally enhanced aerated geopolymer concrete using form-stable phase change composite. Dans: Journal of Building Engineering, v. 40 (août 2021).
- (2021): Reinforcement method for 3D concrete printing using paste-coated bar penetrations. Dans: Automation in Construction, v. 127 (juillet 2021).
- (2016): Parametric analysis for performance enhancement of phase change materials in naturally ventilated buildings. Dans: Energy and Buildings, v. 124 (juillet 2016).
- (2018): Review of 10 years research on building energy performance gap: Life-cycle and stakeholder perspectives. Dans: Energy and Buildings, v. 178 (novembre 2018).
- (2020): Strength and ductility enhancement of 3D printing structure reinforced by embedding continuous micro-cables. Dans: Construction and Building Materials, v. 264 (décembre 2020).
- (2020): Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance. Dans: Construction and Building Materials, v. 250 (juillet 2020).
- (2009): Residual compressive behavior of alkali-activated concrete exposed to elevated temperatures. Dans: Fire and Materials, v. 33, n. 1 (janvier 2009).
- (2019): Performance of NSM FRP embedded in concrete under monotonic and fatigue loads: state-of-the-art review. Dans: Australian Journal of Structural Engineering, v. 20, n. 3 (juin 2019).
- (2019): Stress-strain relationship of cement mortar under triaxial compression. Dans: Construction and Building Materials, v. 220 (septembre 2019).
- (2019): A state-of-the-art review: Near-surface mounted FRP composites for reinforced concrete structures. Dans: Construction and Building Materials, v. 209 (juin 2019).
- (2019): Printability, accuracy and strength of geopolymer made using powder-based 3D printing for construction applications. Dans: Automation in Construction, v. 101 (mai 2019).
- (2015): Tensile Strain Hardening Behavior of PVA Fiber-Reinforced Engineered Geopolymer Composite. Dans: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 10 (octobre 2015).
- (2016): Strength Development and Microfabric Structure of Construction and Demolition Aggregates Stabilized with Fly Ash–Based Geopolymers. Dans: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 11 (novembre 2016).
- (2016): Stabilization of Demolition Materials for Pavement Base/Subbase Applications Using Fly Ash and Slag Geopolymers: Laboratory Investigation. Dans: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 7 (juillet 2016).
- (2017): Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire. Dans: Construction and Building Materials, v. 137 (avril 2017).
- (2010): Residual strength properties of sodium silicate alkali activated slag paste exposed to elevated temperatures. Dans: Materials and Structures, v. 43, n. 6 (juillet 2010).
- (2008): Phase transformations and mechanical strength of OPC/Slag pastes submitted to high temperatures. Dans: Materials and Structures, v. 41, n. 2 (mars 2008).
Structurae coopère avec
