- Fatigue properties of polyurethane concrete expansion joint anchorage zone. Dans: Case Studies in Construction Materials, v. 20 (juillet 2024). (2024):
- Investigating the fatigue performance of conventional reinforced concrete CRTS III ballastless track structures using a fatigue damage constitutive model. Dans: Engineering Structures, v. 303 (mars 2024). (2024):
- Unification and calibration of steel corrosion models based on long-term natural corrosion. Dans: Construction and Building Materials, v. 411 (janvier 2024). (2024):
- Early warping deformation of high-speed railway CRTS III track slabs. Dans: Engineering Structures, v. 294 (novembre 2023). (2023):
- Temperature field and thermal effect analysis of CRTS III ballastless track structure under the outdoor natural environment. Dans: Construction and Building Materials, v. 358 (décembre 2022). (2022):
- Drying and wetting mechanisms of cementitious materials under natural climate: Models, simulations, and experiments. Dans: Construction and Building Materials, v. 338 (juillet 2022). (2022):
- Shear behavior of stud connectors in steel bridge deck and ballastless track structural systems of high-speed railways. Dans: Construction and Building Materials, v. 341 (juillet 2022). (2022):
- Multi-factor sensitivity analysis of chloride ingression: A case study for Hangzhou Bay Bridge. Dans: Construction and Building Materials, v. 330 (mai 2022). (2022):
- An improved alternative queuing method for occupational health and safety risk assessment and its application to construction excavation. Dans: Automation in Construction, v. 126 (juin 2021). (2021):
- Development of control quality factor for HVAC control loop performance assessment—II: Field testing and results (ASHRAE RP-1587). Dans: Science and Technology for the Built Environment, v. 25, n. 7 (2 août 2019). (2019):
- Low-energy LED lighting heat gain distribution in buildings, part II: LED luminaire selection and test results. Dans: Science and Technology for the Built Environment, v. 23, n. 4 (mars 2017). (2017):
- Low-energy LED lighting heat gain distribution in buildings, part 1: Approach and pilot test. Dans: Science and Technology for the Built Environment, v. 23, n. 4 (mars 2017). (2017):
- Commercial building cooling energy forecasting using proactive system identification: A whole building experiment study. Dans: Science and Technology for the Built Environment, v. 22, n. 6 (août 2016). (2016):
- Development, mechanical properties and numerical simulation of macro encapsulated thermal energy storage concrete. Dans: Energy and Buildings, v. 96 (juin 2015). (2015):
- Thermal performance improvement of a horizontal ground-coupled heat exchanger by rainwater harvest. Dans: Energy and Buildings, v. 110 (janvier 2016). (2016):
- A tool for evaluating fault detection and diagnostic methods for fan coil units. Dans: Energy and Buildings, v. 136 (février 2017). (2017):
- Experimental study of cyclic frosting and defrosting on microchannel heat exchangers with different coatings. Dans: Energy and Buildings, v. 226 (novembre 2020). (2020):
- Improving airflow measurement accuracy in VAV terminal units using flow conditioners. Dans: Building and Environment, v. 71 (janvier 2014). (2014):
- (2018): Seismic Performance of a Corroded Reinforce Concrete Frame Structure Using Pushover Method. Dans: Advances in Civil Engineering, v. 2018 ( 2018).